Activation Enthalpies of Deformation-Induced Lattice Defects in Severe Plastic Deformation Nanometals Measured by Differential Scanning Calorimetry

Samples of 99.99 pct pure copper and nickel of 99.998 pct purity were deformed by high-pressure torsion (HPT) at different hydrostatic pressures, to different shear strains. Activation enthalpies (Q) were determined by differential scanning calorimetry (DSC) using Kissinger’s method. For the one annealing peak found in HPT Cu, Q amounts to Q = 0.78 to 0.48 eV depending on the shear strain applied. In the case of Ni, the activation enthalpies of the two annealing peaks were determined as Q = 0.65 eV and Q = 0.95 eV, respectively, with no obvious dependence on shear strain, although this has been indicated by the annealing peak temperatures. Applying defect specific analyses of the annealing peaks, it turned out that the larger Q value represents the annihilation of dislocations and agglomerates, while the smaller one reflects the annihilation of single or double vacancies. Concerning the strain dependence of the larger Q, two possible explanations have been discussed: (1) the annihilation of dislocations assisted by the strain-dependent density of vacancy agglomerates and (2) the annihilation of dislocations enhanced by a strain-dependent level of long-range internal stresses. Because of closer correlations of Q with external and internal stresses at very high shear strains, explanation (2) has been favored.     

Exploring Internal Structure of Nanoporous Glasses Obtained by Leaching of Phase‐Separated Alkali Borosilicate Glasses

Mesoporous glasses – the leaching products of phase‐separated alkali borosilicate glasses – are widely used in fundamental research and practical applications. In this work, the option to control their internal mesopore structure by varying the conditions of microphase separation has been studied. Structure and transport characterization of a family of nanoporous glasses obtained under different conditions has been performed using a combination of several experimental techniques, including gas adsorption, nuclear magnetic resonance cryoporometry and diffusometry.     

Innovative travel time model for dual-shuttle automated storage/retrieval systems

In modern production and distribution systems, the automated storage/retrieval systems (AS/RS), high-storage level systems that reduce labor cost, required floor space and error rate, while increasing product availability, have been widely used since the 1950s. Due to the high-investment costs involved in the development of high-efficient and high-flexible automated storage systems, performance estimation of the systems is both practically and theoretically important. The authors suggest a new method to estimate the travel time of a recently emerging version of AS/RSs, the multi-shuttle systems. The proposal is based on an industrial standard established by the Federation Européenne de la Manutention (F.E.M.). In order to estimate travel times, the authors conduct a Monte Carlo simulation to determine coordinates of two additional representative points which are not given by F.E.M. Then they conduct a new Monte Carlo simulation to compare the results obtained by the method they proposed with those of previous methods and models developed in scientific literature based on Bozer and White formulations. Several real industrial applications demonstrate the validity of proposed method.     

The over-claiming technique: Measuring self-enhancement independent of ability.

Over-claiming is a concrete operalization of self-enhancement based on respondents' ratings of their knowledge of various persons, events, products, and so on. Because 20% of the items are nonexistent, responses can be analyzed with signal detection formulas to index both response bias (over-claiming) and accuracy (knowledge). Study 1 demonstrated convergence of over-claiming with alternative measures of self-enhancement but independence from cognitive ability. In Studies 2-3, the validity of the over-claiming index held even when respondents were (a) warned about the foils or (b) asked to fake good. Study 3 also showed the utility of the over-claiming index for diagnosing faking. In Study 4, the over-claiming technique was applied to the debate over the adaptive value of positive illusions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Removing of light hydrocarbons from gas mixtures using polymeric composite membranes based on poly(1-trimethylsilylpropyne)

Usually the methodologies used to analyse the feasibility of water reuse projects are focused on the internal costs. The aim of this paper is to show a methodology to assess the feasibility of a water reuse project taking into account not just the internal impact, but also the external impact (environmental and social, for example) and the opportunity cost derived from the project. Internal benefit is obtained from the difference between internal income and internal costs. Internal income is obtained by multiplying the selling price of reclaimed water and the volume obtained. Internal costs are made up of the sum of investment costs, operating costs, financial costs and taxes. While some of these factors identified can be calculated directly in terms of money, biophysical and social aspects demand the definition of units of measurement. In order to homogenize results, an annual reference is proposed. A monetary value can be obtained from the calculation of each impact. However, there are a series of externalities for which no explicit market exists. In these cases economic valuation methods are used, based on hypothetical scenarios or patterns observed in related markets.     

Application of Inhibitor‐Loaded Halloysite Nanotubes in Active Anti‐Corrosive Coatings

Halloysite particles are aluminum‐silicate hollow cylinders with a length of 0.5–1 µm, an outer diameter of ca. 50 nm and a lumen of 15 nm. These nanotubes are used for loading and sustained release of corrosion inhibitors. The inhibitor is kept inside the particles infinitely long under dry conditions. Here, halloysite nanotubes filled with anticorrosive agents are embedded into a SiO_x–ZrO_x hybrid film. An aluminum plate is dip‐coated and immersed into 0.1 M sodium chloride aqueous solution for corrosion tests. A defect in the sol–gel coating induces pitting corrosion on the metal accompanied by a strong anodic activity. The inhibitor is released within one hour from halloysite nanotubes at corrosion spots and suppresses the corrosion process. The anodic activity is successfully restrained and the protection remains for a long time period of immersion in NaCl water solution. The self‐healing effect of the sol–gel coating doped with inhibitor‐loaded halloysite nanotubes is demonstrated in situ via scanning vibrating electrode technique measurements.     

Stochastic Spatial Heterogeneity in Activities of H+-ATP-Ases in Electrically Connected Plant Cells Decreases Threshold for Cooling-Induced Electrical Responses

H⁺-ATP-ases, which support proton efflux through the plasma membrane, are key molecular transporters for electrogenesis in cells of higher plants. Initial activities of the transporters can influence the thresholds of generation of electrical responses induced by stressors and modify other parameters of these responses. Previously, it was theoretically shown that the stochastic heterogeneity of individual cell thresholds for electrical responses in a system of electrically connected neuronal cells can decrease the total threshold of the system (“diversity-induced resonance”, DIR). In the current work, we tested a hypothesis about decreasing the thresholds of generation of cooling-induced electrical responses in a system of electrically connected plant cells with increasing stochastic spatial heterogeny in the initial activities of H⁺-ATP-ases in these cells. A two-dimensional model of the system of electrically connected excitable cells (simple imitation of plant leaf), which was based on a model previously developed in our works, was used for the present investigation. Simulation showed that increasing dispersion in the distribution of initial activities of H⁺-ATP-ases between cells decreased the thresholds of generation of cooling-induced electrical responses. In addition, the increasing weakly influenced the amplitudes of electrical responses. Additional analysis showed two different mechanisms of the revealed effect. The increasing spatial heterogeneity in activities of H⁺-ATP-ases induced a weak positive shift of the membrane potential at rest. The shift decreased the threshold of electrical response generation. However, the decreased threshold induced by increasing the H⁺-ATP-ase activity heterogeneity was also observed after the elimination of the positive shift. The result showed that the “DIR-like” mechanism also participated in the revealed effect. Finally, we showed that the standard deviation of the membrane potentials before the induction of action potentials could be used for the estimation of thresholds of cooling-induced plant electrical responses. Thus, spatial heterogeneity in the initial activities of H⁺-ATP-ases can be a new regulatory mechanism influencing the generation of electrical responses in plants under actions of stressors.     

Piezoelectricity in Monolayer Hexagonal Boron Nitride

2D hexagonal boron nitride (hBN) is a wide-bandgap van der Waals crystal with a unique combination of properties, including exceptional strength, large oxidation resistance at high temperatures, and optical functionalities. Furthermore, in recent years hBN crystals have become the material of choice for encapsulating other 2D crystals in a variety of technological applications, from optoelectronic and tunneling devices to composites. Monolayer hBN, which has no center of symmetry, is predicted to exhibit piezoelectric properties, yet experimental evidence is lacking. Here, by using electrostatic force microscopy, this effect is observed as a strain-induced change in the local electric field around bubbles and creases, in agreement with theoretical calculations. No piezoelectricity is found in bilayer and bulk hBN, where the center of symmetry is restored. These results add piezoelectricity to the known properties of monolayer hBN, which makes it a desirable candidate for novel electromechanical and stretchable optoelectronic devices, and pave a way to control the local electric field and carrier concentration in van der Waals heterostructures via strain. The experimental approach used here also shows a way to investigate the piezoelectric properties of other materials on the nanoscale by using electrostatic scanning probe techniques.     

Simulation-based layout optimization for multi-station assembly lines

Journal of Intelligent Manufacturing - This article presents a novel approach for the automated 3D-layout planning of multi-station assembly lines. The planning method is based on a comprehensive...     

Impact of A134 and E218 Amino Acid Residues of Tropomyosin on Its Flexibility and Function

Tropomyosin (Tpm) is one of the major actin-binding proteins that play a crucial role in the regulation of muscle contraction. The flexibility of the Tpm molecule is believed to be vital for its functioning, although its role and significance are under discussion. We choose two sites of the Tpm molecule that presumably have high flexibility and stabilized them with the A134L or E218L substitutions. Applying differential scanning calorimetry (DSC), molecular dynamics (MD), co-sedimentation, trypsin digestion, and in vitro motility assay, we characterized the properties of Tpm molecules with these substitutions. The A134L mutation prevented proteolysis of Tpm molecule by trypsin, and both substitutions increased the thermal stability of Tpm and its bending stiffness estimated from MD simulation. None of these mutations affected the primary binding of Tpm to F-actin; still, both of them increased the thermal stability of the actin-Tpm complex and maximal sliding velocity of regulated thin filaments in vitro at a saturating Ca²⁺ concentration. However, the mutations differently affected the Ca²⁺ sensitivity of the sliding velocity and pulling force produced by myosin heads. The data suggest that both regions of instability are essential for correct regulation and fine-tuning of Ca²⁺-dependent interaction of myosin heads with F-actin.