A Finite Element Computational Method for Gas Hydrate. Part II: Application

A finite element model has been applied to the dissociation of gas hydrates in porous media by hot water injection. In the first step, it was applied to calculate the temperature and saturation profiles for a two-phase convective heat transfer case. The second step involved hydrate thawing calculations with release of water and gas. Realistic results were obtained in predicting the temperature, pressure, and water saturation profiles in the hydrate medium with respect to time, when subjected to hot water injection at high pressure in a wellbore. Furthermore, the thaw front progression calculated by this scheme exhibits stable and satisfactory behavior with respect to time.     

First-Principles Investigation of Electronic Properties of GaAsxSb1 –x Ternary Alloys

Semiconductors - Compositional variations in GaAs based ternary alloys have exhibited wide range alterations in electronic properties. In the present paper, first-principles study of...     

Analysis of Test Application Time for Test Data Compression Methods Based on Compression Codes

We present an analysis of test application time for test data compression techniques that are used for reducing test data volume and testing time in system-on-a-chip (SOC) designs. These techniques are based on data compression codes and on-chip decompression. The compression/decompression scheme decreases test data volume and the amount of data that has to be transported from the tester to the SOC. We show via analysis as well as through experiments that the proposed scheme reduces testing time and allows the use of a slower tester. Results on test application time for the ISCAS'89 circuits are obtained using an ATE testbench developed in VHDL to emulate ATE functionality.     

Solar drying vs. open sun drying: A framework for financial evaluation

Initiatives towards large-scale dissemination of solar dryers for drying of agri-produce face severe competition from the largely prevalent practice of open sun drying in most of the developing countries. Therefore, solar drying systems must offer exceptionally attractive financial gains to enhance their acceptance among the potential users. A modest attempt to develop a simple framework to facilitate a comparison of the financial feasibility of solar drying as against open sun drying has been made in the present work. Results of some exemplifying calculations are presented and briefly discussed.     

Freezing-induced splashing during impact of molten metal droplets with high Weber numbers

The impact of molten tin droplets (0.6 mm diameter) on solid surfaces was observed for a range of impact velocities (10–30 m/s), substrate temperatures (25–200 °C) and substrate materials (stainless steel, aluminum and glass). The substrate was mounted on the rim of a rotating flywheel and the collision of single droplets with the moving substrate was photographed. Droplet impact Reynolds number ranged from 2.2 × 10⁴ to 6.5 × 10⁴ and Weber number from 8.0 × 10² to 7.2 × 10³. On a hot surface there was no splashing and droplets spread to form disk-like splats with smooth edges. Solidification around the edges of droplets spreading on cold surfaces created a solid rim that obstructed flow and triggered splashing. An analytical model was developed to predict the transition temperature at which splashing disappeared by assuming that the thickness of the solid layer had to equal that of the splat in the time the droplet spread to its maximum extent in order to obstruct liquid flow. The model predicted the transition temperature for aluminum and stainless steel surfaces, assuming that thermal contact resistance between the droplet and substrate varied between 10⁻⁶ and 10⁻⁷ m² K/W. The model also predicted that tin droplets would not splash on glass surfaces maintained at or above room temperature, and this was confirmed by experiments.     

4D Printing of Shape Memory Materials for Textiles: Mechanism,Mathematical Modeling,and Challenges

Shape memory materials (SMMs) in 3D printing (3DP) technology garnered much attention due to their ability to respond to external stimuli, which direct this technology toward an emerging area of research, “4D printing (4DP) technology.” In contrast to classical 3D printed objects, the fourth dimension, time, allows printed objects to undergo significant changes in shape, size, or color when subjected to external stimuli. Highly precise and calibrated 4D materials, which can perform together to achieve robust 4D objects, are in great demand in various fields such as military applications, space suits, robotic systems, apparel, healthcare, sports, etc. This review, for the first time, to the best of the authors’ knowledge, focuses on recent advances in SMMs (e.g., polymers, metals, etc.) based wearable smart textiles and fashion goods. This review integrates the basic overview of 3DP technology, fabrication methods, the transition of 3DP to 4DP, the chemistry behind the fundamental working principles of 4D printed objects, materials selection for smart textiles and fashion goods. The central part summarizes the effect of major external stimuli on 4D textile materials followed by the major applications. Lastly, prospects and challenges are discussed, so that future researchers can continue the progress of this technology.     

Pad effects on material-removal rate in chemical-mechanical planarization

The role of a porous pad in controlling material-removal rate (MRR) during the chemical-mechanical planarization (CMP) process has been studied numerically. The numerical results are used to develop a phenomenological model that correlates the forces on each individual abrasive particle to the applied nominal pressure. The model provides a physical explanation for the experimentally observed domains of pressure-dependent MRR, where the pad deformation controls the load sharing between active-abrasive particles and direct pad-wafer contact. The predicted correlations between MRR and slurry characteristics, i.e., particle size and concentration, are in agreement with experimentally measured trends reported by Ouma¹ and Izumitani.²     

A new control approach to three-phase active filter for harmonicsand reactive power compensation

This paper deals with a new control scheme for a parallel 3-phase active filter to eliminate harmonics and to compensate the reactive power of the nonlinear loads. A 3-phase voltage source inverter bridge with a DC bus capacitor is used as an active filter (AF). A hysteresis based carrierless PWM current control is employed to derive the switching signals to the AF. Source reference currents are derived using load currents, DC bus voltage and source voltage. The command currents of the AF are derived using source reference and load currents. A 3-phase diode rectifier with capacitive loading is employed as the nonlinear load. The AF is found effective to meet IEEE-519 standard recommendations on the harmonics level     

Optimum tilt of solar collector for maximum natural flow

A theoretical treatment to determine the natural flow rate through a flat plate collector having heat losses is made. The governing equations have been expressed in terms of Grashof and Prandtl numbers and a dimensionless heat loss parameter. The method predicts the optimum tilt of the flat plate collector for the maximum draught for a given latitude and insolation. The experimental verification of the theoretical results shows a fair agreement.

A method to calibrate the hot wire anemometer at the desired temperature is evolved for the range of velocities encountered in practice for the flat plate solar collector.     

Modeling of short-pulse threshold voltage shifts due to DX centersin AlxGa1-xAs/GaAs and AlxGa1-xAs/InyGa1-yAs MODFET's

The DX-center-related short-pulse threshold voltage shifts (SPTVS) in Al_xGa_1-xAs-based MODFETs is modeled using CBAND, a simulator that solves Poisson equations self-consistently with Schrodinger equations and donor statistics. Using values given in the literature for the DX energy level in Al_xGa_1-xAs this technique gives good agreement between measured and simulated SPTVS for Al_0.3Ga_0.7As/GaAs and Al_0.3Ga_0.7As/In_0.2Ga_0.8As MODFETs. Both simulation and experiment show that the use of Al_0.2 Ga_0.8As in the donor layer reduces the SPTVS relative to the structures using Al_0.3Ga_0.7As. However, the measured shifts at this composition are considerably lower than the simulated values, indicating a DX energy level that may be higher than the value extrapolated from the literature, possibly due to the existence of multiple trap levels. Despite this discrepancy, these results support the use of strained-channel layers and lower Al_x Ga_1-xAs compositions in MODFETs for digital and other large-signal applications requiring good threshold stability