Coordination Environment of Cu(II) Ions Bound to N-Terminal Peptide Fragments of Angiogenin Protein

Angiogenin (Ang) is a potent angiogenic factor, strongly overexpressed in patients affected by different types of cancers. The specific Ang cellular receptors have not been identified, but it is known that Ang–actin interaction induces changes both in the cell cytoskeleton and in the extracellular matrix. Most in vitro studies use the recombinant form (r-Ang) instead of the form that is normally present in vivo (“wild-type”, wt-Ang). The first residue of r-Ang is a methionine, with a free amino group, whereas wt-Ang has a glutamic acid, whose amino group spontaneously cyclizes in the pyro-glutamate form. The Ang biological activity is influenced by copper ions. To elucidate the role of such a free amino group on the protein–copper binding, we scrutinized the copper(II) complexes with the peptide fragments Ang(1–17) and AcAng(1–17), which encompass the sequence 1–17 of angiogenin (QDNSRYTHFLTQHYDAK-NH₂), with free amino and acetylated N-terminus, respectively. Potentiometric, ultraviolet-visible (UV-vis), nuclear magnetic resonance (NMR) and circular dichroism (CD) studies demonstrate that the two peptides show a different metal coordination environment. Confocal microscopy imaging of neuroblastoma cells with the actin staining supports the spectroscopic results, with the finding of different responses in the cytoskeleton organization upon the interaction, in the presence or not of copper ions, with the free amino and the acetylated N-terminus peptides.     

Caffeine selectivity of divinylbenzene crosslinked polymers in aqueous media

The selective binding of caffeine to polymers is of interest in developing caffeine-specific sensors. The influence of the nature and quantity of crosslinking agents and functional monomers on the selectivity and binding affinity of a polymer to caffeine is reported. A high binding affinity and selectivity of divinylbenzene (DVB) crosslinked polymers toward caffeine was exhibited by the binding competition of caffeine with several dimethylated and chlorinated xanthines and N-methylated uric acids in aqueous media. To understand the nature of the caffeine–polymer interaction, we performed binding studies with solvents of different polarities and ionic strengths. The binding properties of DVB-based polymers containing different functional monomers were compared with Amberlite^® XAD resins. Analytes with hydrophilic and electron-withdrawing groups lowered their binding affinity with the polymer in comparison with caffeine and its dimethylated derivatives. The caffeine–polymer interaction appeared to be predominantly a hydrophobic π–π interaction but partly due to the presence of caffeine-specific sites. The reversibility of the caffeine–polymer binding was investigated, and the dissociation constants were approximated to be 27 and 6 mM. Dipole moments of caffeine and related molecules were estimated theoretically and were correlated with their corresponding B/T ratio, which is defined as the fraction of caffeine bound to the polymer. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 195–205, 2001     

Polycarbonate‐based composites reinforced by in situ polytetrafluoroethylene fibrillation: Preparation,thermal and rheological behavior

Fibrillar reinforced composites of polytetrafluoroethylene (PTFE) and polycarbonate (PC) were prepared by in situ fibrillation of PTFE into PC matrix using twin screw extruder. Different samples were obtained by varying the relative ratio between PC and PTFE. The rheological properties of the PC/PTFE composites were found to depend on concentration of the PTFE fibrils. The melt strength analysis in nonisothermal conditions was also studied. The increase in force and decrease in drawability with increasing the PTFE content are associated with the PTFE fibrils formed in situ during the thermomechanical process in twin screw extruder. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42401.     

FAME Production and Fatty Acid Profiles from Moist Chlorella sp. and Nannochloropsis oculata Biomass

In the present study, we investigated the production of fatty acid methyl esters (FAME) from moist Chlorella sp. and Nannochloropsis oculata biomass using a hydrolysis–esterification process. Additionally, we evaluated for the first time the fatty acid profile before and after this process. Hydrolysis of the lipid fraction was performed on a moist biomass in the presence of differing amounts of an acid catalyst in both 50 and 100 % w/w water relative to the biomass. The esterification of the crude extracts of the free fatty acids (FFA) was then investigated. The experiments show that in the presence of 50 % w/w water relative to the biomass, the hydrolysis–esterification process results in higher FFA and FAME yields. The analysis of the fatty ester profiles did not reveal any degradation of the FFA from the microalgae biomass under the hydrolysis–esterification conditions. The results were compared with both extraction–transesterification and direct transesterification processes using dry biomass. The extraction–transesterification and hydrolysis–esterification processes resulted in similar FAME yields and similar profiles of the fatty esters from dry and moist biomass materials, respectively.     

Cover Image,Volume 66, Issue 3

The cover image, by Katia Sparnacci et al., is based on the Research Article High temperature surface neutralization process with random copolymers for block copolymer self‐assembly, DOI: 10.1002/pi.5285 .

     

On the use of a powder rheometer to characterize the powder flowability at low consolidation with torque resistances

The Anton Paar Powder Cell was used to measure the torque necessary to rotate an impeller in beds of glass beads, sand and alumina powders aerated between no aeration to the minimum for fluidization. Measured torque values depend on the material tested, on the air flow rate applied, on the impeller depth and on the height of the impeller blade. The effect of the impeller depth is linear for low impeller depth and is less than linear at high depth values. A model was developed for the interpretation of the experimental results based on the idea that the material is shearing on the surface described by the impeller rotation. The model allows to estimate an effectiveness of the impeller in the torque determination and also to predict the torque for the impeller at the at deepest positions at which the wall effects have to be considered. © 2017 American Institute of Chemical Engineers AIChE J, 2017     

Preliminary study of the use of spent diatomaceous earth from the brewing industry in clay matrix bricks

In this work the effect of spent diatomaceous earth (SDE), as pore forming or silica carrier, on the properties of clay ceramic bricks was investigated. Mixtures of clay and SDE waste were, compacted, dried and fired at 950°C during 6?h. The technological properties of waste-clay bricks were analysed to evaluate the influence of the waste incorporation. The SDE (1–5?wt-%) addition in the clay matrix causes a reduction between 6 and 12% of the bulk density compared with the control samples (only clay) which implies good insulating characteristics. In addition, the waste incorporation increases the water absorption within the range 4–31% and decreases the compressive strength between 12 and 26%. However, the incorporation of the waste is beneficial as no remarkable changes in the technological properties are observed. These results indicate that the waste has a predominant pore forming effect over a pore filling effect.     

Slot coating flows of non‐colloidal particle suspensions

Slot coating is used in the manufacturing of functional films, which rely on specific particle microstructure to achieve the desired performance. Final structure on the coated film is strongly dependent on the suspension flow during the deposition of the coating liquid and on the subsequent drying process. Fundamental understanding on how particles are distributed in the coated layer enables optimization of the process and quality of the produced films. The complex coating flow leads to shear‐induced particle migration and non‐uniform particle distribution. We study slot coating flow of non‐colloidal suspensions by solving the mass and momentum conservation equations coupled with a particle transport equation using the Galerkin/Finite element method. The results show that particle distribution in the coating bead and in the coated layer is non‐uniform and is strongly dependent on the imposed flow rate (wet thickness). © 2016 American Institute of Chemical Engineers AIChE J, 63: 1122–1131, 2017