Eco-efficiency and techno-economic analysis for maleic anhydride manufacturing processes

Clean Technologies and Environmental Policy - Maleic anhydride may be obtained from different technological routes, being the selective oxidation of benzene and oxidation of butane the only ones...     

Work Standardization at High-Tech Enterprises in the Digital Era

Russian Engineering Research - Work standardization at Russian high-tech enterprises is considered, in the digital era. The new possibilities created by the digital economy permit increased...     

Synthesis and Properties of Fumaric Copolymers as Potential Bitumen Modifiers

New copolymers of dioctyl fumarate (DOF) and styrene (S) were synthetized by radical polymerization and used to modify bitumen. The poly(dioctyl fumarate-co-styrene) copolymers, PFS, were characterized by ¹H-NMR and FTIR spectroscopies and size exclusion chromatography (SEC) in order to determine their monomer composition and weight average molecular weights, respectively. The polymer-bitumen blending conditions were optimized and the samples analyzed by different methodologies. Fluorescence microscopy, rotational viscosity and differential scanning calorimetry (DSC) were used to study the morphological changes of blends during their manufacturing and the rheological and thermal behavior, respectively. All modified bitumen (MB) exhibited higher viscosity than the based bitumen (BB) under studied conditions and this effect was more evident for the MB containing the higher molecular weight polymer. The addition of polymers to BB enhances the bitumen viscosity and thus increased the energy required for the flowing (activation energy calculated by Arrhenius equation). Thermal and morphological analysis showed that all MB exhibited good polymer- bitumen compatibility, which could be consider as a good starting point for a potential applications of this new material in road engineering.     

Stability of microencapsulated lactic acid bacteria under acidic and bile juice conditions

The probiotic strains Lactobacillus brevis CCMA1284 and Lactobacillus plantarum CCMA0359 were microencapsulated by spray drying using different matrices – whey powder (W), whey powder with inulin (WI) and whey powder with maltodextrin (WM). Viability of the microencapsulated strains in acid and bile juices and during 90 days of storage (seven and 25 °C) was evaluated. The two strains exhibited high encapsulation efficiency (> 86%) by spray drying. The different matrices maintained L. plantarum viability above six log CFU g⁻¹ at 7 °C for 90 days, whereas similar results for L. brevis were observed only for W. The use of inulin as matrix of encapsulation did not enhance bacterial viability in the evaluated conditions. In general, the use of W and WM as matrices was effective for L. plantarum viability. However, only W was effective for L. brevis in the evaluated conditions. The spray drying technique was successfully adopted for the encapsulation of L. plantarum CCMA0359 and L. brevis CCMA1284 strains.     

Design Impact on Airflow Patterns in Fluidization Units

The airflow behavior in a fluidization unit was integrally studied by means of experimental work and computational fluid dynamics simulation. The computational domain included the gas inlet pipe, plenum, perforated plate, fluidization chamber, and air outlet pipe. Different scenarios were simulated to allow distinguishing the best way to represent perforated‐plate distributors and elucidate the impact of the grid design on the fluidization performance. The simulated pressure drop across the distributor and the plenum flow pattern were in concordance with the experimental data. It was found that the distance between the peripheral holes and walls has a great impact on the airflow downstream the distributor.     

Automatic bearing fault diagnosis based on one-class ν-SVM

Rolling-element bearings are among the most used elements in industrial machinery, thus an early detection of a defect in these components is necessary to avoid major machine failures. Vibration analysis is a widely used condition monitoring technique for high-speed rotating machinery. Using the information contained in the vibration signals, an automatic method for bearing fault detection and diagnosis is presented in this work. Initially, a one-class ν-SVM is used to discriminate between normal and faulty conditions. In order to build a model of normal operation regime, only data extracted under normal conditions is used. Band-pass filters and Hilbert Transform are then used sequentially to obtain the envelope spectrum of the original raw signal that will finally be used to identify the location of the problem. In order to check the performance of the method, two different data sets are used: (a) real data from a laboratory test-to-failure experiment and (b) data obtained from a fault-seeded bearing test. The results showed that the method was able not only to detect the failure in an incipient stage but also to identify the location of the defect and qualitatively assess its evolution over time.     

On the Use of Static Temperature Measurements as Process Variation Observable

In this paper we present the use of static temperature measurements as process variation observable. Contrary to previously published thermal testing methods, the proposed methodology does not need an excitation signal, thus reducing test cost and improving built-in capabilities of thermal monitoring. The feasibility of the technique and a complete test methodology is presented using a narrowband LNA as example. Finally, a complete electro-thermal co-simulation test bench between the LNA and a differential temperature sensor embedded in the same silicon die is presented in order to validate the results. Results prove that RF figures of merit can be extracted from DC temperature measurements done without loading or exciting the RF circuit under test.     

Characterization of Microencapsulated Rosemary Essential Oil and Its Antimicrobial Effect on Fresh Dough

This study aimed to characterize rosemary essential oil particles obtained by spray-drying and to evaluate their antimicrobial activity. Measurements of mycelial growth of Penicillium and Aspergillus fungi, isolated from fresh dough, were made applying oil concentrations of 1.0, 5.0, 10.0, 20.0, and 50.0 μL/mL. Fungi and yeast counts in the fresh dough submitted to the control (no oil), pure oil, and microencapsulated oil treatments were also conducted. The microcapsules showed 50 % oil retention after drying, and the major oil components identified were 1,8-cineole (29.0 %), camphor (26.6 %), and α-pinene (10.6 %). The analysis of the particles revealed surfaces without fissures, with a mean particle size of 12.2 μm and presenting an amorphous structure. The growth inhibiting effect of Penicillium sp. fungus, compared to the control, was verified at concentrations of 1.0, 5.0, and 10.0 μL/mL rosemary essential oil, which did not differ among them. For Aspergillus sp., the application of 10.0 μL/mL oil provided greater inhibition compared to 1.0 and 5.0 μL/mL. Complete inhibition occurred with the application of 50.0 μL/mL for both fungal genera tested. At 8 days of dough storage at 25 °C, a decrease of at least 0.7 and 1.5 log cycles of fungal growth was observed in the dough with pure oil and that with microencapsulated oil, respectively, relative to the control. The microencapsulation process retained the antimicrobial property of rosemary essential oil and provided further extension of this activity over time when applied to fresh dough.