Predictive Thermal Inactivation Model for Effects and Interactions of Temperature, NaCl, Sodium Pyrophosphate, and Sodium Lactate on Listeria monocytogenes in Ground Beef

The effects and interactions of heating temperature (60 °C to 73.9 °C), salt (0.0 % to 4.5 %?w/v), sodium pyrophosphate (0.0 % to 0.5 %?w/v), and sodium lactate (0.0 % to 4.5 %?w/v) on the heat resistance of a five-strain mixture of Listeria monocytogenes in 75 % lean ground beef were examined. Meat samples in sterile filtered stomacher bags were heated in a temperature controlled waterbath to determine thermal death times. The recovery medium was tryptic soy agar supplemented with 0.6 % yeast extract and 1 % sodium pyruvate. Weibull survival functions were employed to model the primary survival curves. Then, survival curve-specific estimated parameter values obtained from the Weibull model were used for determining a secondary model. The results indicate that temperature and salt have a large impact on the inactivation kinetics of L. monocytogenes, while sodium lactate (NaL) has an impact in the presence of salt. The model presented in this paper for predicting inactivation of L. monocytogenes can be used as an aid in designing lethality treatments meant to control the presence of this pathogen in ready-to-eat products.     

Analytical modeling of Transmission Control Protocol NewReno using Generalized Stochastic Petri Nets

This paper presents a novel analytical model of Transmission Control Protocol (TCP) using a generalized stochastic Petri net (GSPN). Extensive simulation work has been done for the performance evaluation of TCP NewReno protocol. In view of the limitations of the simulation technique, we present an analytical approach using GSPN. A GSPN is a useful mathematical tool that solves continuous time Markov chains for complex systems and evaluates the stationary behavior. In this paper, we analyze the slow‐but‐steady variant of TCP NewReno. The model captures the behavioral aspects of the slow start and the congestion avoidance phase together with the fast retransmit and recovery capabilities of TCP NewReno. Performance metrics such as throughput, goodput, and task completion time of the system are obtained. The effect of variation in the model parameters on the performance is studied. The results are validated using the network simulator, and their accuracy is verified by evaluating the confidence interval. The performance of the proposed model is compared with that of TCP Reno. The performance of the proposed model is also compared with one of the previous models. The numerical illustrations and comparison of the proposed technique with simulation validates the accuracy, efficiency, and competence of the GSPN technique. While GSPN modeling for TCP is investigated in depth for the TCP NewReno and TCP Reno variant in this paper, other protocols could be also analyzed similarly. Copyright © 2013 John Wiley & Sons, Ltd.     

Design and Characterization of a W-Band Folded-Waveguide Slow-Wave Structure

A single-section slow-wave structure for a W-band folded-waveguide traveling-wave tube with operating bandwidth of around 4% was designed for delivering the output power of 50 W at the operating voltage of 13.5 kV and operating beam current of 80 mA. The design was carried out using analytical formulations and 3D electromagnetic simulations. The beam-wave interaction analysis was carried out using large signal Lagrangian analysis and particle-in-cell simulation. The folded-waveguide slow-wave structure along with input-output couplers and RF windows were fabricated. Cold test measurements were carried out for dispersion characteristics of the slow-wave structure and voltage standing-wave ratio and insertion loss characteristics of the RF window. The measured cold circuit parameters show close agreement with the analysis.     

Effects of entrainment and agglomeration of particles on combustion of nano-aluminum and water mixtures

The combustion of nano-aluminum and water mixtures is studied theoretically for a particle size of 80 nm and over a pressure range of 1–10 MPa. Emphasis is placed on the effects of entrainment and agglomeration of particles on the burning rate and its dependence on pressure. The flame thickness increases by a factor of ∼10, when particle entrainment is considered. This lowers the conductive heat flux at the ignition front, thereby reducing the burning rate. The pressure dependence of the burning rate is attributed to the changes in the burning time and velocity of particles with pressure. In the diffusion limit, the pressure exponent increases from 0 to 0.5, when the entrainment index increases from 0 to 1.0. A similar trend is observed in the kinetics-controlled regime, although the corresponding value exceeds the diffusion counterpart by 0.5. The kinetics-controlled model significantly over-predicts the burning rate and its pressure exponent, depending on the entrainment index. The present analysis suggests that nano-particles formed closely-packed agglomerates of diameter 3–5 μm, which may burn under diffusion-controlled conditions at high pressures.     

Effect of packing density on flame propagation of nickel-coated aluminum particles

The combustion-wave propagation of nickel-coated aluminum particles is studied theoretically for packing densities in the range of 10–100% of the theoretical maximum density. Emphasis is placed on the effect of packing density on the burning properties. The energy conservation equation is solved numerically and the burning rate is determined by tracking the position of the flame front. Atomic diffusion coefficients and reaction rate of isolated nickel-coated aluminum particles are input parameters to the model. The burning behaviors and combustion wave structures are dictated by the heat transfer from the flame zone to the unburned region. Five different models for the effective thermal conductivity of the mixture are employed. The impact of radiation heat transfer is also assessed. As a specific example, the case with a particle size of 79 μm is considered in detail. The burning rate remains nearly constant (<1 cm/s) up to a packing density of 60%, and then increases sharply toward the maximum value of 11.55 cm/s at a density of 100%. The Maxwell–Eucken–Bruggeman model of thermal conductivity offers the most accurate predictions of the burning rate for all loading densities.     

Semiconductor quantum dots as nanoelectronic circuit components

In this paper, a systematic investigation of frequency response of CdS and CdS:Cu quantum dot devices, following microwave-assisted synthesis, is presented. Phase of the output relative to the input as a function of frequency is also recorded to have some insight into the observed low-pass filter characteristics of the as-fabricated devices. The as-fabricated quantum dot devices are found to have all the characteristics of a classical low-pass filter with optimization of gain, phase shift and cut-off frequency in the band-gap range of ‘2.5–2.6’ eV. The as-fabricated devices are tested for demodulation and satisfactory operation is obtained. This suggests for employing such nanoscale devices in the field of communications.     

Lead‐Free Polycrystalline Ferroelectric Nanowires with Enhanced Curie Temperature

Ferroelectrics are important technological materials with wide‐ranging applications in electronics, communication, health, and energy. While lead‐based ferroelectrics have remained the predominant mainstay of industry for decades, environmentally friendly lead‐free alternatives are limited due to relatively low Curie temperatures (T _C) and/or high cost in many cases. Efforts have been made to enhance T _C through strain engineering, often involving energy‐intensive and expensive fabrication of thin epitaxial films on lattice‐mismatched substrates. Here, a relatively simple and scalable sol–gel synthesis route to fabricate polycrystalline (Ba_0.85Ca_0.15)(Zr_0.1Ti_0.9)O₃ nanowires within porous templates is presented, with an observed enhancement of T _C up to ≈300 °C as compared to ≈90 °C in the bulk. By combining experiments and theoretical calculations, this effect is attributed to the volume reduction in the template‐grown nanowires that modifies the balance between different structural instabilities. The results offer a cost‐effective solution‐based approach for strain‐tuning in a promising lead‐free ferroelectric system, thus widening their current applicability.     

Linear circuits: a measurement‐based approach

This paper proposes a new measurement‐based approach that can solve synthesis problems in unknown linear circuits. The method makes use of a small number of measurements to determine the functional dependency of any circuit signal or variable on any set of design variables. Once the functional dependency is obtained, the design requirements can be applied to find the design parameter values. The results are described for linear direct current and alternating current circuits. Copyright © 2013 John Wiley & Sons, Ltd.     

Poly(ethylene oxide)‐g‐gellan polysaccharide nanocarriers for controlled gastrointestinal delivery of simvastatin

Herein, a novel gellan polysaccharide‐based amphiphilic copolymer was synthesized for the development of simvastatin‐loaded micellar nanoparticles. The nanoparticles were explored for their controlled drug release and improved pharmacodynamic potentials. The copolymer was characterized by Fourier transform infrared spectroscopy (FTIR) and elemental analysis. The onset of copolymer micellization was detected by fluorescence spectroscopy. Simvastatin was loaded into micellar particles by solvent evaporation method and the particles were then characterized by microscopic and light scattering techniques. The physical state of drug was studied by X‐ray diffraction analysis. Pharmacodynamic assessment of the micellar preparations was done on rabbit models. The copolymer formed micellar nanoparticles in water. Critical micellar concentration was 9.12mg/l. The micellar particles (426.8–912.6nm) entrapped a maximum of 18.86% drug. Higher negative zeta potential indicated physical stability of micellar systems. A simple diffusion mechanism was operative in the event of comparatively faster drug release in pH6.8 phosphate buffer solution. No significant drug‐copolymer interaction was traced by FTIR spectroscopy. The amorphization of drug into micellar particles reduced LDL‐cholesterol level by ～45% in hyperlipidemic rabbits and this was about 2.5 times higher than pure drug dispersion. Copolymer micellar nanoparticles of simvastatin could control cholesterol level in hyperlipidemic rabbits and thus had potential in drug delivery applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42399.