Electrochemical removal of chromium from wastewater by using carbon aerogel electrodes

A study has been carried out to determine the feasibility of electrochemical removal of chromium ions from industrial wastewater using carbon aerogel electrodes. In this work the effect of key variables including pH (2-7), concentration 2-8 (mg/l), and charge 0.3-1.3 (A h) was determined. The metal ion removal was significantly increased at reduced pH and high charge conditions. The metal concentration in the wastewater can be reduced by 98.5% under high charge (0.8A h) and acidic conditions (pH 2). The effect of the independent parameters--pH, effluent concentration and charge on the percentage removal was depicted by a quadratic equation obtained using Box-Behnken model. The regression analysis gave a R2 value of 0.9469 shows a close fit between the experimental results and the model predictions. The model was further used to optimise the parameters to maximise the percentage Cr-removal to more than 98%.     

New boron analogues of pyrophosphates and deoxynucleoside boranophosphates

Tetraethyldicyanoborane pyrophosphate (2) and 3'-(diethylphosphite-cyanoborano)-5'-dimethoxytrityl.N(4)-benzoyl-deoxycytidine (3) have been synthesized in 70% and 76% yields, respectively. The compatibility of the substituted boranophosphates with common protecting groups is hereby demonstrated.Boron containing biologically active compounds, such as nucleosides and nucleotides (1-6) and amino acids (7-9) are important due to their potential therapeutic activity, research and diagnostic applications. Many boron containing compounds have shown promising activity as anticancer, (10.) (11.) (12) antiinflammatory,(13) and antiosteoporotic (13)agents. Oligonucleotdes in which a non-bridging oxygen atom is replaced by a borane(BH(3)) group are a very important class of modified nucleic acids. (1.) (3.) (14-16) The BH(3) group is isoelectronic with oxygen in natural oligonucleotides and isoelectronic and isostructural with the oligonucleotide methyl phosphonates, which are nuclease resistant. On the other hand, the alpha-borano triphosphates are good substrates for DNA polymerases and incorporation of boranophosphates into DNA causes an increase in the resistance to exo- and endonucleases (2.) (17a) as compared to non-modified DNA. There are also notable applications of the alpha-borano triphosphates in PCR sequencing (17a) and nucleic acid detection (17b).     

基于红旗linux DC的维、汉、英多语种操作系统的设计与实现

本文初步地介绍了红旗Linux DC的国际化,本地化的概念,并分析与研究了红旗Linux DC的国际化和本地化的方法和算法。     

Femtosecond laser machining of cooling holes in thermal barrier coated CMSX4 superalloy

Machining of cooling holes on thermal barrier coated superalloy components using a nanosecond (ns) laser generates considerable collateral damage such as recast layer, spatter and delamination of the ceramic coating. However, recent studies have suggested that these damages can be virtually eliminated by machining with femtosecond (fs) lasers. A detailed study on the microstructural characteristics of fs laser machined holes with diameters of 300 μm and 600 μm, generated on thermal barrier coated superalloy CMSX4 under various processing conditions has been conducted. Features examined include the shape, size and the surface finish of the hole wall. Femtosecond laser machined holes with a surface roughness of less than 2 μm and no major collateral damage could be generated in coated samples up to a thickness of 1.5 mm. The machining was found to cause minor ablative material removal from the top ceramic layer within 100 μm of the outer edge of the hole. The presence of machined holes did not affect the thermal cycling life at 1100 °C of the coated samples.     

Physical and mathematical modelling of flow and residence time distributions in different tundish designs

A steady state, three‐dimensional, turbulent flow model has been developed in‐house for analysis of melt flow and residence time distribution phenomena in steelmaking tundish system. The governing equations of flow, turbulence and tracer dispersion were derived in terms of the Cartesian co‐ordinate systems and solved numerically with their associated boundary conditions adapting a control volume based finite difference procedure. In the numerical solution scheme, the pressure‐velocity coupling was treated via the popular Simple (semi implicit method for pressure linked equations) algorithm. Prior to carrying out elaborate numerical predictions for tundish geometry, the model was applied to several standard test problems and evaluated against corresponding bench mark results. Thus, several typical test problems such as, flows in a cubic cavity, flows in ducts of rectangular cross‐section, flow over flat plate and so on were simulated numerically to assess the adequacy and appropriateness of the computational procedure developed. Results thus obtained together with the bench mark solutions indicated that the mathematical model is internally consistent and sufficiently robust. Accordingly, the turbulent flow model was applied to simulate flow and Residence Time Distributions (RTD) in four different tundish designs . These included, a single strand and a two strand slab casting tundish systems, a six strand rectangular shaped tundish and a six strand delta shaped billet casting tundish. Various RTD parameters (e.g., minimum break through time, t_min, time at which peak concentration occurs, t_peak and average residence time, t_av) were computed numerically in the four tundish systems and these were subsequently compared with corresponding experimental measurements derived from equivalent water model tundish systems. Except for the single strand tundish system, large differences between measurements and prediction (particularly on t_min and t_peak) were noted for the other three tundish geometries. Furthermore, the extent of such discrepancy was found to be relatively more pronounced for the multi‐strand tundish system. The possible reasons for such discrepancy is discussed in the text and it was shown computationally that relatively better agreement between theory and measurement can be achieved if, instead of the high Reynolds number k‐ε turbulence model, a low Reynolds number turbulence model is applied in the computational procedure.     

An optimal distributed solution to the dining philosophers problem

An optimal distributed solution to the dining philosophers problem is presented. The solution is optimal in the sense that it incurs the least communication and computational overhead, and allows the maximum achievable concurrency. The worst case upper bound for concurrency is shown to ben div 3,n being the number of philosophers. There is no previous algorithm known to achieve this bound.     

A constructive heuristic for minimizing makespan in no-wait flow shop scheduling

This paper presents a new constructive heuristic, based on the principle of job insertion, for minimizing makespan in no-wait permutation flow shop scheduling problems. Empirical results demonstrate the superiority of the proposed approach over four of the best-known methods in the literature. Analytical expressions for the total number of partial and complete sequences generated by the algorithms are derived. Statistical tests of significance substantiate the improvement in solution quality.     

Physicochemical,thermal and pasting properties of starch separated from γ-irradiated and stored potatoes

The morphological, thermal and pasting properties of starch separated from potatoes of three varieties (Kufri Chandramukhi, Kufri Jyoti and Kufri Chipsona-2), treated either with CIPC (isopropyl N-(3 chlorophenyl) carbamate) or γ-irradiation (Co⁶⁰, 0.1 and 0.5 kGy) and subsequently stored at 8, 12 and 16 °C for 90 days, were studied. Scanning electron microscopy (SEM) showed the presence of oval and irregular shaped starch granules with a diameter range of 15–16 μm. Mean granule size of starch separated from potatoes stored at 12 °C ranged from 18–25 μm and irradiation treatment resulted in an increase in the proportion of small size granules. The irradiation of potatoes with 0.5 kGy resulted in starch with significantly lower peak-, trough- and breakdown-viscosity as compared to starch from potatoes treated with either CIPC or 0.1 kGy irradiation. The irradiation of potatoes with 0.5 kGy caused a significant increase in setback and pasting temperature. Pasting temperature of starch was observed to vary with the storage temperature. Starch separated from potatoes stored at higher temperature showed lower pasting temperature and vice versa. The starch from potatoes stored at 8 °C showed higher peak-, trough- and breakdown-viscosity and lower setback. Peak viscosity increased and swelling volume decreased with increase in storage temperature. FTIR spectra showed that the starch from irradiated potatoes displayed a significant decrease in the intensity of the C–H stretch region between 2800 and 3000 cm⁻¹, which was observed to be irradiation dose-dependent, and higher with 0.5 than 0.1 kGy. However, a slight broadening of O–H stretch (3000–3600 cm⁻¹) in starches from irradiated potatoes was observed. The spectral changes caused by γ-irradiation were apparent in the O–H stretch (3000–3600 cm⁻¹), C–H stretch (2800–3000 cm⁻¹) and bending mode of water (1600–1800 cm⁻¹).