Sol–gel approach to near-net-shape oxide–oxide composites reinforced with short alumina fibres—The effect of crystallization

Near-net-shape (NNS) high alumina (alumina:silica = 96:4, in equivalent weight ratio) fibre reinforced ceramic matrix composites (CMCs) were prepared with single and bicomponent sols following sol–gel vacuum infiltration technique. The CMCs were characterized by X-ray diffraction (XRD), three-point bend test and scanning electron microscopy (SEM). Crystallization of tetragonal zirconia (t-ZrO₂) in the composite, CZY having zirconia–yttria matrix and that of gamma alumina (γ-Al₂O₃) in the composites, CAZ having alumina–zirconia matrix, CAS having alumina–silica matrix and CA having alumina matrix, enhanced the flexural strength values and pseudo-ductile character of CMCs.     

Effect of Electrode Microstructure on the Sensitivity and Response Time of Potentiometric NOX Sensors

Nanometric La₂CuO₄ was synthesized with the Pechini method, co-precipitation, and two variations of the auto-ignition technique for fabricating NO _X sensor electrodes. The auto-ignition technique produced the most phase-pure powder with the smallest particle size and the largest specific surface area. The sensor electrodes were subjected to various thermal treatments resulting in a variety of electrode grain sizes and distributions. The response times of the sensors were exponentially dependent on electrode grain size. Sensors with fine-grained electrodes were able to produce a steady-state and consistent voltage at lower temperatures; improving their response sensitivity. Sensors fabricated with powders synthesized through the auto-ignition route responded quickly, sensitively, and reproducibility to NO.     

Synthesis of Flexible Graphene/Polymer Composites for Supercapacitor Applications

In this paper, the graphene was synthesized using biocompatible cellulosic component from onions. Onion epidermal cells were chosen as raw material. During heating at high temperature, the bonding among atoms in material was rearranged and forms two-dimensional hexagonal carbon layer (graphene). The characterization of synthesized graphene was done by x-ray diffractometer, Raman spectrometer and field emission scanning electron microscopy, respectively. An attempt has been taken to form the capacitors with two different current collector electrodes, anticipating the performance of the supercapacitors. The observed capacitance values as-obtained for Al and Au current collector were 1.3 μF and 6.08 μF, respectively. However, when thermally exfoliated graphene was used as an electrode on Al and Au current collector, the capacitance value was drastically increased and found to be 1.6 and 41.25 μF, respectively.     

A copper–cyclen coordination complex associated with a polyoxometalate anion: Synthesis,crystal structure and electrochemistry of [Cu(cyclen)(MeCN)][W6O19]

The reaction between Cu(NO₃)₂·3H₂O and a tetra-aza macrocycle, more specifically, cyclen in 1:1 MeCN–MeOH solvent mixture forms a Cu²⁺–cyclen coordination complex in situ, that has been reacted with an isopolyanion [W₆O₁₉]^2? in a slow diffusion technique, resulting in the isolation of an ion-pair solid [Cu(cyclen)(MeCN)][W₆O₁₉] (1). Single crystal structural investigation on 1 shows a square pyramidal geometry around the metal centre (copper ion) with an axially bound MeCN solvent molecule. The title compound 1 is the first crystallographically characterized ion-pair compound, in which a transition metal coordination complex of a tetra-aza-crown ether (cyclen) has been associated with a polyoxometalate cluster anion. This communication deals with synthesis, spectroscopic, structural and electrochemical analyses of compound 1.     

Improvement in shape memory in magnesium niobate modified PZST

A modified lead zirconate stannate titanate system (PZST) has been studied for shape memory effect. Addition of magnesium niobate (MN) slows down the dipole relaxation process, leading to increased (∼3-fold improvement) remnant strain in the PZST system (0.99PZST–0.01PMN). Room temperature X-ray diffraction patterns before poling (antiferroelectric (AFE) tetragonal) and after poling (ferroelectric (FE) rhombohedral), clearly demonstrate that the transition to the ferroelectric phase is stable even in the absence of any electric field. A small applied electric field (∼1.7 kV/cm) in the opposite direction was required to bring the sample back to its original shape. Field-induced strain butterfly loops taken at 50 Hz show that the material response time is quite small.     

The effect of modifying an edge-plane pyrolytic graphite electrode with single-wall carbon nanotubes on its use for sensing diclofenac

A simple and highly sensitive sensor based on edge-plane pyrolytic graphite electrode (EPPGE) coated with single-wall carbon nanotubes is proposed for diclofenac determination in nanomolar concentrations. The oxidation of diclofenac occurred in two well-defined peaks having peak potentials ∼439 and ∼854 mV at pH 7.2. The modified electrode showed excellent catalytic activity presenting much higher peak currents than those measured on a bare EPPGE. Under the optimum conditions, the calibration curve was linear in the concentration range 1 × 10⁻⁹-500 × 10⁻⁹ M and 25 × 10⁻⁹-1500 × 10⁻⁹ M for peaks I and II, respectively. The limit of detection for peaks I and II was found as 0.82 × 10⁻⁹ and 22.5 × 10⁻⁹ M, respectively. The developed sensor was applied for the determination of diclofenac in biological and pharmaceutical samples using square-wave voltammetry and the validation of results using high performance liquid chromatography showed excellent agreement.     

Conventional and Unconventional Mechanisms by which Exocytosis Proteins Oversee β-cell Function and Protection

Type 2 diabetes (T2D) is one of the prominent causes of morbidity and mortality in the United States and beyond, reaching global pandemic proportions. One hallmark of T2D is dysfunctional glucose-stimulated insulin secretion from the pancreatic β-cell. Insulin is secreted via the recruitment of insulin secretory granules to the plasma membrane, where the soluble N-ethylmaleimide-sensitive factor attachment protein receptors (SNAREs) and SNARE regulators work together to dock the secretory granules and release insulin into the circulation. SNARE proteins and their regulators include the Syntaxins, SNAPs, Sec1/Munc18, VAMPs, and double C2-domain proteins. Recent studies using genomics, proteomics, and biochemical approaches have linked deficiencies of exocytosis proteins with the onset and progression of T2D. Promising results are also emerging wherein restoration or enhancement of certain exocytosis proteins to β-cells improves whole-body glucose homeostasis, enhances β-cell function, and surprisingly, protection of β-cell mass. Intriguingly, overexpression and knockout studies have revealed novel functions of certain exocytosis proteins, like Syntaxin 4, suggesting that exocytosis proteins can impact a variety of pathways, including inflammatory signaling and aging. In this review, we present the conventional and unconventional functions of β-cell exocytosis proteins in normal physiology and T2D and describe how these insights might improve clinical care for T2D.     

Is the Jaw Bone Micro-Structure Altered in Response to Osteoporosis and Bisphosphonate Treatment? A Micro-CT Analysis

The aim of the study was to quantify the micro-architectural changes of the jaw bone in response to ovariectomy, exposed or not to bisphosphonate treatment. A total of 47 Wistar rats were ovariectomized (OVX) or sham-operated (shOVX) and exposed to osteoporosis preventive treatment for eight weeks either with bisphosphonates (alendronate, ALN; group OVX-ALN) three days/week at a dose of 2 mg/kg or with saline solution (untreated control condition; group OVX). The bone morphometric parameters of the trabecular jaw bone were assessed using ex vivo micro-computed tomography. The regions of interest investigated in the maxilla were the inter-radicular septum of the second molar and the tuber. The regions quantified in the mandible included the three molar regions and the condyle. A one-way analysis of variance followed by pairwise comparison using Tukey’s HSD and the Games–Howell test was conducted to explore significant differences between the groups. In the maxilla, OVX decreased the bone volume in the inter-radicular septum of the second molar. Bisphosphonate treatment was able to prevent this deterioration of the jaw bone. The other investigated maxillary regions were not affected by (un)treated ovariectomy. In the mandible, OVX had a significant negative impact on the jaw bone in the buccal region of the first molar and the inter-radicular region of the third molar. Treatment with ALN was able to prevent this jaw bone loss. At the condyle site, OVX significantly deteriorated the trabecular connectivity and shape, whereas preventive bisphosphonate treatment showed a positive effect on this trabecular bone region. No significant results between the groups were observed for the remaining regions of interest. In summary, our results showed that the effects of ovariectomy-induced osteoporosis are manifested at selected jaw bone regions and that bisphosphonate treatment is capable to prevent these oral bone changes.     

M- S-H formation in MgO-SiO2slurries via wet milling for magnesia based castables

It is believed that the formation of hydration phase, MgO-SiO₂-H₂O (M-S-H), contributes to good workability and reliable comprehensive properties for magnesia based castables. In order to stimulate the formation of M-S-H in magnesia based castables and understand the minimum introduction of microslica amount, wet milling process was used to promote the dissolution of MgO and SiO₂ in this work. The slurry containing different content of microsilica with wet milling technology and the castables with/without wet milling slurry were prepared. The effects of microsilica content on the formation of hydration phases were analyzed by XRD, FT-IR and TG/DSC and the properties of magnesia based castables were evaluated by explosion resistance, CMOR, HMOR and so on. The results showed that the formation of M-S-H was accelerated because of the dissolution of Mg²⁺ and HSiO₃^? in wet milling process. Higher amount of M-S-H led to a tight bonding in the early stage, and a denser structure after firing at high temperature due to the limited formation of brucite and in-situ formation of evenly distributed forsterite phase. In addition, much higher HMOR were obtained when less microsilica was added, attributing to the suppressed formation of low-melting-point liquid. Therefore, 2–3 wt% microsilica addition was recommended in this process.