安阳市水资源生态足迹与生态承载力研究

利用水资源生态足迹分析方法对安阳市2005~2014年的水资源生态足迹、生态承栽力进行了计算分析。结果表明,2005~2014年安阳市人均水资源生态足迹均值为0.45 hm~2/cap,且呈波动下降趋势。其中生产用水生态足迹占水资源生态足迹比重最大,达82.8%~91.4%,生活用水足迹其次,生态用水足迹最小,但呈上升趋势。安阳市水资源人均生态承载力较小,在0.048 hm~2/cap~0.068 hm~2/cap之间,受气候、水文起伏波动较大。安阳市2005—2014年间,水资源生态足迹均处于赤字状态,说明安阳市水资源利用长期以来一直是不可持续的。近10年来,安阳市万元GDP水资源生态足迹整体呈较快下降趋势,表明安阳市水资源利用效率正逐步提高。     

Face detection based on skin color likelihood

We propose a face detection method based on skin color likelihood via a boosting algorithm which emphasizes skin color information while deemphasizing non-skin color information. A stochastic model is adapted to compute the similarity between a color region and the skin color. Both Haar-like features and Local Binary Pattern (LBP) features are utilized to build a cascaded classifier. The boosted classifier is implemented based on skin color emphasis to localize the face region from a color image. Based on our experiments, the proposed method shows good tolerance to face pose variation and complex background with significant improvements over classical boosting-based classifiers in terms of total error rate performance.     

Pt-V2O5-WO3/TiO2 catalysts supported on SiC filter for NO reduction at low temperature

The catalytic filter, V₂O₅-WO₃-TiO₂ supported on a ceramic filter, is known as a promising material for treating particulates and NO _x simultaneously at optimum temperatures around 320°C. In order to improve its catalytic activity at low temperatures, the effect of Pt addition on the catalytic filter has been investigated. Catalytic filters, Pt-V₂O₅-WO₃-TiO₂/SiC, were prepared by co-impregnation of Pt, V, and W precursors on TiO₂ coated-SiC filter by vacuum aided-dip coating. The Pt-added catalytic filter shifted the optimum working temperature from 280–330°C (for the non Pt-impregnated filter) to 180–230°C, providing N _x slip concentration less than 20 ppm for the treatment of 700 ppm NO at a face velocity of 2 cm/s with the same value over the non Pt-added catalytic filters. The promotional effect following the addition of Pt is believed to result from electrical modification of the catalyst maintaining a high electron transfer state. Ammonia oxidation was also observed to be dominant above the optimal temperature for SCR.     

Steam gasification of an australian bituminous coal in a fluidized bed

To produce low calorific value gas, Australian coal has been gasified with air and steam in a fluidized bed reactor (0.1 m-I.Dx1.6 m-high) at atmospheric pressure. The effects of fluidizing gas velocity (2–5 U_f/U_mf), reaction temperature (750–900 °C), air/coal ratio (1.6-3.2), and steam/coal ratio (0.63–1.26) on gas composition, gas yield, gas calorific value of the product gas and carbon conversion have been determined. The calorific value and yield of the product gas, cold gas efficiency, and carbon conversion increase with increasing fluidization gas velocity and reaction temperature. With increasing air/coal ratio, carbon conversion, cold gas efficiency and yield of the product gas increase, but the calorific value of the product gas decreases. When steam/coal ratio is increased, cold gas efficiency, yield and calorific value of the product gas increase, but carbon conversion is little changed. Unburned carbon fraction of cyclone fine decreases with increasing fluidization gas velocity, reaction temperature and air/coal ratio, but is nearly constant with increasing steam/coal ratio. Overall carbon conversion decreases with increasing fluidization velocity and air/ coal ratio, but increases with increasing reaction temperature. The particle entrainment rate increases with increasing fluidization velocity, but decreases with increasing reaction temperature. This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement from Korea University.     

SAR-derived wind fields at the coastal region in the East/Japan Sea and relation to coastal upwelling

The relationship between the modification of synthetic aperture radar (SAR) wind field and coastal upwelling was investigated using high-resolution wind fields from Advanced Land Observing Satellite (ALOS) Phased Array type L-band synthetic aperture radar (PALSAR) imagery and sea-surface temperature (SST) from National Oceanic and Atmospheric Administration/Advanced Very-High-Resolution Radiometer (NOAA/AVHRR) data. The retrieved SAR wind speeds seem to agree well with in situ buoy measurements with only a relatively small error of 0.7 m s^?1. The SAR wind fields retrieved from the east coast of Korea in August 2007 revealed a spatial distinction between near and offshore regions. Low wind speeds of less than 3 m s^?1 were associated with cold water regions with dominant coastal upwelling. Time series of in situ measurements of both wind speed and water temperature indicated that the upwelling was induced by the wind field. The low wind field from SAR was mainly induced by changes in atmospheric stability due to air–sea temperature differences. In addition, wind speed magnitude showed a positive correlation with the difference between SST and air temperature (R² = 0.63). The dependence of viscosity of water on radar backscattering at the present upwelling region was negligible since SAR data showed a relatively large backscattering attenuation to an SST ratio of 1.2 dB °C^?1. This study also addressed the important role of coastal upwelling on biological bloom under oligotrophic environments during summer.     

Sintering Behavior of Cadmium-Doped Pb(Ni1/3Nb2/3)O3–PbZrO3–PbTiO3 Ceramics

Substituting Cd²⁺ ions into the A and B sites in a Pb(Ni_1/3Nb_2/3)O₃PbZrO₃PbTiO₃ (PNNPZPT) ternary perovskite material made it possible to determine the effects of the Cd²⁺ ion substitution site on sintering behavior. The substitution site of the Cd²⁺ ion was identified by using X-ray photoelectron spectroscopy spectra. Although Cd²⁺ ions were substituted into the A and B sites in PNNPZPT, the Cd²⁺ ions preferred the A site over the B site. When Cd²⁺ ions replaced Pb²⁺ ions, a weight gain was observed during sintering. On the other hand, replacing Ni2 ions with Cd²⁺ ions promoted weight loss. Those weight changes indicated that Cd²⁺ ions change the bonding strength between the B-site cations and the oxygen of the octahedron in a perovskite structure. Density was influenced by the Cd²⁺ ion substitution site, and the A-site-doped compositions had higher densities than the B-site-doped compositions.     

Prelaunch calibration and primary results from in-orbit calibration of the atmospheric correction microwave radiometer (ACMR) on the HY-2A satellite of China

The atmospheric correction microwave radiometer (ACMR) is one of the main payloads for correcting atmospheric path delay in the radar altimeter on the Haiyang-2A (HY-2A) satellite. The ACMR is a three-band microwave radiometer operating at 18.7, 23.8, and 37.0 GHz. Calibration of the ACMR is important for applying its measurements to correct for atmospheric effects on the HY-2A altimeter signal transmission in the air. Therefore, a detailed introduction to the principles and specifications of the ACMR system is given first. The thermal vacuum calibration method of the ACMR is discussed and analysed, and the microwave transfer functions and related coefficients are given, especially the nonlinear coefficients derived from a test for correcting nonlinear responses between the input of antenna temperature and the output of voltage at each channel of the ACMR. Furthermore, antenna pattern correction algorithms for removing the effects of side lobe and cross-polarization are derived and their coefficients are used for in-orbit data processing. Primary calibration results are given by comparing with the similar spaceborne Jason microwave radiometer (JMR) on the Jason-1 satellite and with the advanced microwave radiometer (AMR) on Jason-2. The results of this comparison show that the data from the ACMR match well to those from the JMR and AMR.     

Effect of reactive diluents on properties of unsaturated polyester/montmorillonite nanocomposites

Unsaturated polyester (UP)/montmorillonite (MMT) nanocomposite was prepared by using hydroxypropylacrylate (HPA) as a reactive diluent instead of conventional styrene monomer and the effect of polarity of reactive diluent on properties of nanocomposite was investigated. X‐ray and mechanical test data indicated that mixing for an extended period of time is essential to enhance the physical properties of nanocomposites in the UP/Cloisite 6A system. This was attributed to the high polarity of HPA that may disturb the preintercalation of UP resin into the galleries of MMT. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 238–242, 2004     

ShapeSynth: Parameterizing model collections for coupled shape exploration and synthesis

Recent advances in modeling tools enable non‐expert users to synthesize novel shapes by assembling parts extracted from model databases. A major challenge for these tools is to provide users with relevant parts, which is especially difficult for large repositories with significant geometric variations. In this paper we analyze unorganized collections of 3D models to facilitate explorative shape synthesis by providing high‐level feedback of possible synthesizable shapes. By jointly analyzing arrangements and shapes of parts across models, we hierarchically embed the models into low‐dimensional spaces. The user can then use the parameterization to explore the existing models by clicking in different areas or by selecting groups to zoom on specific shape clusters. More importantly, any point in the embedded space can be lifted to an arrangement of parts to provide an abstracted view of possible shape variations. The abstraction can further be realized by appropriately deforming parts from neighboring models to produce synthesized geometry. Our experiments show that users can rapidly generate plausible and diverse shapes using our system, which also performs favorably with respect to previous modeling tools.     

Illuminant Aware Gamut‐Based Color Transfer

This paper proposes a new approach for color transfer between two images. Our method is unique in its consideration of the scene illumination and the constraint that the mapped image must be within the color gamut of the target image. Specifically, our approach first performs a white‐balance step on both images to remove color casts caused by different illuminations in the source and target image. We then align each image to share the same ‘white axis’ and perform a gradient preserving histogram matching technique along this axis to match the tone distribution between the two images. We show that this illuminant‐aware strategy gives a better result than directly working with the original source and target image's luminance channel as done by many previous methods. Afterwards, our method performs a full gamut‐based mapping technique rather than processing each channel separately. This guarantees that the colors of our transferred image lie within the target gamut. Our experimental results show that this combined illuminant‐aware and gamut‐based strategy produces more compelling results than previous methods. We detail our approach and demonstrate its effectiveness on a number of examples.