Percolative current flow in high-Jc,polycrystalline high-Tc superconductors

In this article, experiments designed to ascertain the percolative nature of current flow in high critical-current density (J_c) polycrystalline superconductors are reviewed. A direct correlation between the grain-orientation texture with current transport in high-J_c TlB₂Ca₂Cu₃O_x thick films and Bi₂Sr₂Ca₂Cu₃O_x powder-in-tube tapes is obtained. Magnetooptical visualization of the current flow in the same regions confirms the percolative nature of current flow. Furthermore, numerical modeling of the current flow based on the observed grain boundary character distribution and the effects of the grain boundary misorientation angle on (J_c) was found to predict the percolative nature of current flow. These studies indicate that in order to increase the (J_c) further, increased fractions of small-angle boundaries are required and, hence, provide a research direction for the next generation of high-temperature superconducting wire.     

Epitaxial Film Growth of Tl0.78Bi0.22Sr1.6Ba0.4Ca2Cu3O9 on Rolling Assisted Biaxially Textured Nickel Substrates with YSZ And CeO2 Buffer Layers

Epitaxial film growth of Tl_0.78Bi_0.22Sr_1.6Ba_0.4Ca₂Cu₃O₉ ((Tl,Bi)-1223) on rolling assisted biaxially textured substrates with YSZ and CeO₂ buffer layers (RABiTS) has been successfully demonstrated by laser ablation and post-deposition annealing in flowing argon. X-ray diffraction (XRD) θ-2θ spectra showed that the films consisted mainly of c-axis aligned 1223 phase with some intergrown 1212 phase, while XRD Φ-scans of (102) pole figure revealed that the films are also a- and b-axes aligned, with an epitaxy of the «100» of (Tl,Bi)-1223 film on the «110» of the top YSZ buffer layer. Four-terminal electrical transport measurements showed that the zero-resistance transition temperature (T_c) was in the range of 106 - 110 K, and the critical current density (J_c) at 77 K and zero field was about 10⁵ A/cm² for the entire film width (3 mm) of a longer film (14 mm) which was processed differently from the shorter films (7 mm). For a shorter film (7 mm) that showed better ab-in-plane alignment, the magnetization J_c, at 77 K and extrapolated to zero field, calculated from Bean's model using the full film width (3.5 mm) as the appropriate lateral dimension, was 2 × 10⁵ A/cm².     

High Critical Current Density YBa2Cu3O x Tapes Using the RABiTs Approach

Progress in the fabrication of epitaxial, high-J _c, biaxially aligned YBCO thick films on Rolling-assisted biaxially textured substrates (RABiTs) is reported. RABiT substrates comprise a biaxially textured metal substrate with epitaxial oxide buffer layers suitable for growth of superconductors. Oxide buffer layers have been deposited using three techniques: laser ablation, electron-beam evaporation, and sputtering. Epitaxial YBCO films grown using laser ablation on such substrates have critical current densities approaching 3 × 10⁶ A/cm² at 77 K in zero field and have field dependences similar to epitaxial films on single crystal ceramic substrates. Critical current densities in excess of 0.2 MA/cm² have been obtained on stronger, nonmagnetic substrates. In addition, samples with J _e of 12.5 kA/cm² at 77 K have been fabricated. The highest strain tolerence obtained so far is 0.7% in compression and 0.25% in tension. Deposited conductors made using this technique offer a potential route for the fabrication of long lengths of high-J _c wire capable of carrying high currents in high magnetic fields and at elevated temperatures.     

Mesoscale Modeling and Validation of Texture Evolution during Asymmetric Rolling and Static Recrystallization of Magnesium Alloy AZ31B

The focus of the present research is to develop an integrated deformation and recrystallization model for magnesium alloys at the microstructural length scale. It is known that in magnesium alloys nucleation of recrystallized grains occurs at various microstructural inhomogeneities such as twins and localized deformation bands. However, models need to be developed that can predict the evolution of the grain structure and texture developed during recrystallization and grain growth, especially when the deformation process follows a complicated deformation path such as in asymmetric rolling. The deformation model is based on a crystal plasticity approach implemented at the length scale of the microstructure that includes deformation mechanisms based on dislocation slip and twinning. The recrystallization simulation is based on a Monte Carlo technique that operates on the output of the deformation simulations. The nucleation criterion during recrystallization is based on the local stored energy, and the Monte Carlo technique is used to simulate the growth of the nuclei resulting from local stored energy differences and curvature. The model predictions are compared with experimental data obtained through electron backscatter analysis and neutron diffraction.     

Feasibility Study of Continuous Casting of Steel Billets in Twin-Belt Caster

Metallurgical and Materials Transactions B - Integrated casting and rolling in a series production line is well established for the non-ferrous metals through the use of twin-belt casting...     

A general regression neural network

A memory-based network that provides estimates of continuous variables and converges to the underlying (linear or nonlinear) regression surface is described. The general regression neural network (GRNN) is a one-pass learning algorithm with a highly parallel structure. It is shown that, even with sparse data in a multidimensional measurement space, the algorithm provides smooth transitions from one observed value to another. The algorithmic form can be used for any regression problem in which an assumption of linearity is not justified.     

Prevention of type I diabetes in the non-obese diabetic (NOD) mouse with 15-deoxyspergualin (15-DS) or 15-DS + cyclosporin A (CyA)

By selectively inbreeding diabetic individuals, we have been able to establish an NOD mouse population with a genetic predisposition towards insulin-dependent diabetes mellitus (IDDM) in approximately 100% of cases. We examined the preventive effect of 15-DS or 15DS + CyA on developing IDDM in these animals. Whereas 15-DS has been proved to be effective in preventing diabetes (significant decrease of the diabetic risk ratio to 0.368 and a reduction of the incidence of the disease to 46.7%), combined treatment with CyA did not produce any additional benefit.