Localised visualisation of O2 consumption and H2O2 formation by means of SECM for the characterisation of fuel cell catalyst activity

Catalytic reduction of O₂ at metal catalysts either follows a 2-electron transfer pathway to the formation of H₂O₂ or a 4-electron transfer pathway to the formation of H₂O. The branching ratio of this reaction has a significant impact on the applicability of catalyst materials. The previously introduced oxygen competition mode of SECM, which allows high-resolution imaging of local O₂ consumption, has been extended to a potential-pulse sequence enabling the sequential detection of O₂ reduction followed by the detection of local H₂O₂ formation. Thus, not only the local catalytic activity of a catalyst can be visualised but, additionally, the degree of the branching can be estimated. The selectivity of a catalyst candidate can thereby be visualised sequentially to the elucidation of its activity. First results on the properties of electrodeposited Pt and Au test structures are shown demonstrating the feasibility to clearly distinguish catalyst activity and selectivity under variation of the polarisation potential.     

Development of strategies for reducing air pollutant emissions in the European community

In view of increasing economic and environmental problems, energy supply strategies as well as air pollutant emission reduction strategies are required. These strategies should be designed in accordance with the specific development of a country or region. In the past they were mainly considered with respect to the finiteness of natural resources and the scarcity of economic resources. In recent years the ‘joint-production’ of air pollutant emissions in the energy sector has been increasingly recognized as an additional argument. As a consequence, concepts on future energy pathways, which should be efficient with respect to both economic development and environmental protection, have to be devised. For this purpose energy-environmental models such as EFOM-ENV can be used as analytic tools. The paper discusses optimal future energy supply structures that result from different strategies for air-pollution control in the countries of the European Community. The results have been obtained by applying the energy flow optimization model (EFOM), which has been extended by additional environmental modules to EFOM-ENV. The issues of the paper are based on research activities that the authors are performing for the Commission of the European Communities (CEC), Brussels, and the European Research Center for Air Pollution Control Measures (PEF), Karlsruhe, in close co-operation with research institutes in member countries of the European Community.     

Textile solar light collectors based on models for polar bear hair

Concepts of technical fibers following models for the polar bear hair to be used for textile solar collectors are discussed. The approach to coat fibers with a thin layer into which fluorescent dyestuff was dispersed was studied experimentally. Modified fibers made of different polymers were characterized with respect to optical properties relevant for the bionic model. In the case of poly(methylmethacrylate) fibers, the envisaged effect could be achieved to high efficiency. The optical performance could be enhanced by ultrasonic dispersion of the dyestuff in the coating matrix. The effect is less significant in semi-crystalline fibers such as poly(ethylene terephthalate), which is attributed to diffuse scattering.     

Plasmachemisches Ätzen und Beschichten bei Atmosphärendruck

Atmospheric pressure plasma‐chemical etching and deposition. Application in crystalline silicon photovoltaics. For industrial processing of wafer based crystalline silicon solar cells a variety of different technologies are applied. The combination of these requires a complex wafer handling; increasing not only investment costs, but also the risk of wafer breakage. Application of plasma technologies offers the possibility to manufacture crystalline silicon solar cells without any wet chemical or vacuum processes. At Fraunhofer IWS all etching steps necessary for the production of solar cells and the deposition of silicon nitride as passivation and anti‐reflection coating were demonstrated successfully using atmospheric pressure plasma technologies.     

The fabrication of nanoporous Pt-based multimetallic alloy nanowires and their improved electrochemical durability

A general approach for the fabrication of nanoporous Pt-based multimetallic alloy nanowires is reported, which involves electrodeposition of corresponding precursor alloys into porous anodic alumina templates, followed by a mild dealloying process. Nanoporous ternary PtCoNi and PtCoAu as well as quaternary PtRuCoNi nanowires were successfully fabricated, and their microstructure and composition were examined by transmission electron microscopy. Electrochemical tests showed that these porous nanowires exhibit higher electrochemically active surface area and much improved durability compared to commercially available Pt black, and may find potential applications in electrocatalysis and electrochemical sensing.     

An Alternative Route Towards Metal–Polymer Hybrid Materials Prepared by Vapor‐Phase Processing

Transition metals incorporated into polymers lead to unusual or improved physical properties that significantly differ from those of purely organic polymers. A simple and practicable incorporation of diverse transition metals into any available polymer would make an important contribution to overcome some of the synthetic difficulties of metal‐polymer hybrid materials. Here, it is demonstrated that atomic layer deposition (ALD) can be a promising means to resolve some of those difficulties. It is found that even polytetrafluoroethylene (PTFE) with its great physical and chemical stability can be easily transformed into a transition metal–PTFE hybrid material simply by applying a metal‐oxide ALD process to PTFE. Upon metal incorporation into the PTFE, the molecular structure as well as mechanical properties (tensile behavior) of PTFE were observed to significantly change. For a better understanding of the changes to the material, experimental investigations using Raman spectroscopy, attenuated‐total‐reflection Fourier‐transform infrared spectroscopy, wide‐angle X‐ray diffraction, and energy‐dispersive X‐ray analysis were performed. In addition, with density functional theory calculations, potential bonding states of the incorporated metal into PTFE were modeled and predicted. The ALD‐based vapor‐phase approach for metal incorporation into a polymer could bring about rapid progress in the research area of metal–polymer hybrid materials.     

Reaction calorimetric investigation of the ring-opening polymerization of ε-caprolactone

The ring-opening polymerization of ε-caprolactone was investigated by means of the Mettler RC1 reaction calorimeter. In the range of small and medium monomer conversions this method can successfully be used for the determination of the course of the bulk polymerizations. The experimental results obtained by calorimetric and gravimetric method, respectively, are compared and the course of the polymerization is discussed in dependence on the reaction parameters (initiator, temperature).     

Different signals control the activation of glycolysis in the yeast Saccharomyces cerevisiae

The glycolytic pathway in Saccharomyces cerevisiae is activated by fermentable sugars at several steps. Mutants with deletions of genes coding for enzymes of the upper part of glycolysis were used to characterize the triggering mechanisms. Synthesis of fructose-2,6-bisphophate is catalysed by two 6-phosphofructo-2-kinase isoenzymes, one of which is activated by fermentable sugars while synthesis of the second enzyme is induced (Kretschmer and Fraenkel, 1991). Increase in the level of fructose-2, 6-bisphosphate is demonstrated to depend on an internal metabolite upstream of the phosphoglucose isomerase reaction. The signalling process correlates with distinct temporal changes in the concentration of glucose-6-phosphate but not with its absolute level, indicating an adaptational mechanism. It is independent of the uptake and phosphorylation systems used by different sugars. Interestingly, this increase, although delayed, could also be observed in strains lacking the rapid cAMP increase after sugar addition which is thought to be responsible for the activating process. Synthesis of glucose-6-P and fructose-6-P is needed for the complete induction of pyruvate kinase and inactivation of fructose-1,6-bisphosphatase. On the other hand, induction of pyruvate decarboxylase depends mainly on a signal in the lower part of glycolysis.