In vivo aging of gutta‐percha dental cone

Gutta‐percha cone is the most widely used material for root canal filling. The in vivo aging of this cone focus on the degradation of its main organic component, trans‐1,4‐polyisoprene, was studied. Aged cones (25 samples) from 2 to 30 years of root canal filling were extracted from different patients in the occasion of retreatment by mechanical way. The information about the aging time was given by the patients. Gel‐permeation chromatography (GPC) and infrared spectroscopy (FTIR) were the analytical techniques used. Polyisoprene degrades with time of aging, but in a slow process. Decrease in polymer molar mass from 5.7 × 10⁵ to 1.7 × 10⁵ g/mol was observed in polyisoprene from cone after 30 years of root canal filling and inside a noninfected tooth. In tooth with caries and periodontal infection, the decrease in molar mass is higher (4.6 × 10⁴ g/mol in cone with 10 years of aging). The production of carbonyl and hydroxyl groups in the aged material indicates that the process is oxidative, even in closed teeth. In these cases, the oxygen could be provided from tissue fluid. The degradation mechanism is complex and depends on many factors, besides time of root canal filling. The dental problem caused by the aging could be the production and migration of cytotoxic substances to periodontal ligament and the reduction on the canal sealing property due to the polymer weight loss. Both of them could contribute to the root canal treatment failure. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:4082–4088, 2006     

Study of the copper leaching in the wet oxidation of phenol with CuO-based catalysts: Causes and effects

Catalytic wet oxidation of phenol as a model pollutant has been performed in a three phase fixed-bed reactor (FBR) by using a commercial catalyst based on copper oxide in order to analyze the variables affecting significantly the copper leaching. It has been found that temperature has an almost negligible influence in the range studied (70–160 °C). On the contrary, an important effect of the pH value was noticed. The copper leaching reduces when the pH of the solution fed to the reactor increases, being almost negligible at pH ≥ 5. Moreover, the composition of the reaction media also influences the leaching. Higher copper concentrations than those expected by the effect of the acid aqueous media have been measured in the reactor effluent when phenol, catechol, hydroquinone, p-benzoquinone and maleic acid are present in the reaction media. On the contrary, oxalic acid has a negative influence on the leaching, since it captures the copper in solution to form copper oxalate which precipitates on the catalyst surface. For a previously acidified medium, the acetic and formic acids do not have any other effect on the copper leaching. It has been also demonstrated that as copper in solution decreases, so does phenol conversion, because the homogeneous catalysis contributes significantly to the oxidation reactions even in fixed-bed reactors.     

Land Use Effect on the CN Model Parameters in a Tropical Dry Environment

Dry tropical forests account for over 1,000,000 km², and there is still lack of knowledge on their hydrologic processes. The curve number (CN) hydrologic model developed by the Natural Resources Conservation Service (NRCS) is widely applied for runoff determination in various parts of the world, but not so in tropical semiarid regions. This study analyzes the impact of land use changes on the CN model in a tropical semiarid environment, in two catchments of native dry tropical forest and thinned dry tropical forest land use from 2009 to 2012. The CN model was calibrated and validated for the NRCS recommended initial abstraction ratio λ = 0.2, and for λ evaluated from rainfall and runoff data. A reliability analysis was performed using Monte Carlo simulation. Model goodness-of-fit was assessed with statistical criteria. A total of 42 and 40 rainfall-runoff events were analyzed for the native and thinned dry tropical forest, respectively. Characteristic λ values of 0.15 and 0.11 were determined for the two respective catchments. Although CN values were similar for both land uses, CN_λ=0.20 = 80 and CN_{median λ} = 77, the thinned catchment showed a higher CN model parameters variability. The CN model was more sensitive to variations of CN values than to those of λ. This study showed that no matter the vegetation management in a dry tropical forest environment, modeled runoff is not affected by λ, but rather affected by CN, which represents soil, landuse and management.     

Analytical ray tracing system: Introducing art, a C-library designed for seismic applications

Ray tracing technique is an important tool not only to forward but also for inverse problems in Geophysics, which most of the seismic processing steps depend on. However, implementing ray tracing codes can be very time consuming. This article presents a computer library to trace rays in 2.5D media composed by a stack of layers. The velocity profile inside each layer is such that the eikonal equation can be analytically solved. Therefore, the ray tracing within such profile is made fast and accurate. The great advantage of an analytical ray tracing library is the numerical precision of the quantities computed and the fast execution of the implemented codes. Even though ray tracing programs exist for a long time, for example the seis88 package by ?ervený, most of those programs use a numerical approach to compute the ray. Regardless of the fact that numerical methods can solve more general problems, the analytical ones could be part of a more sophisticated simulation process, where the ray tracing time is completely relevant. We demonstrate the feasibility of our codes using several examples (Miqueles et al., 2013)  [1]. The library can also be used for other applications besides seismic, e.g., optics and tomography.     

Dynamic thread mapping of shared memory applications by exploiting cache coherence protocols

In current computer architectures, the communication performance between threads varies depending on the memory hierarchy. This performance difference must be considered when mapping parallel applications to processor cores. In parallel applications based on the shared memory paradigm, the communication is difficult to detect because it is implicit. Furthermore, dynamic mapping introduces several challenges, since it needs to find a suitable mapping and migrate the threads with a low overhead during the execution of the application. We propose a mechanism to detect the communication pattern of shared memory applications by monitoring cache coherence protocols. We also propose heuristics that, combined with our communication detection mechanism, allow the mapping to be performed dynamically by the operating system. Experiments with the NAS Parallel Benchmarks showed a reduction of up to 13.9% of the execution time, 30.5% of the cache misses and 39.4% of the number of invalidation messages.     

The effect of ceria content on the performance of Pt/CeO2/Al2O3 catalysts in the partial oxidation of methane

The effect of CeO₂ loading (1–20 wt.%) on the properties and catalytic behaviors of CeO₂–Al₂O₃-supported Pt catalysts on the partial oxidation of methane was studied. The catalysts were characterized by S_BET, X-ray diffraction (XRD), temperature-programmed reduction (TPR) and oxygen storage capacity (OSC). XRD and TPR results showed that the pretreatment temperature of the support influences on the amount of CeO₂ with fluorite structure. The pretreatment temperature of the support and CeO₂ loading influenced the morphology of Pt. OSC analysis showed a significant increase in the oxygen storage capacity per weight of CeO₂ for samples with high CeO₂ loading (12 and 20 wt.%). TPR analyses showed that the addition of Pt promotes the reduction of CeO₂. This effect was more significant for the catalysts with high CeO₂ loading (≥12 wt.%). The dispersion of Pt, measured by the rate of cyclohexane dehydrogenation, increases with increasing of the pretreatment temperature of the support. It was shown that the kind of the support is very important for obtaining of catalysts resistant to carbon formation. The catalysts with high CeO₂ loading (≥12 wt.%) showed the highest catalytic activity and stability in the reaction of partial oxidation of methane due to a higher Pt–CeO₂ interface.     

Comparative analysis of methods for determining the metabolic rate in order to provide a balance between man and the environment

The incorrect determination of metabolic rate can be linked to discrepancies between the model of the PMV (Predicted Mean Vote) and real thermal sensation collected in field studies. Aiming to improve the correlation of the PMV model and the real thermal sensation, this work established new values for the metabolic rate: one way being called “calculated” using Newton's Method and the other called "measured" using a metabolic analyzer. Welder's activities were evaluated, through the measurements of environmental and personal variables. New values of metabolic rate were determined for this activity. The values found for the calculated form and the measured one were, respectively, 178.63 and 145.46 W/m², different from the range provided by the table of ISO 8996 (2004) for this activity (75–125 W/m²). In order to verify which of the values of the metabolic rate was closer to the real thermal sensation of PMV, a linear regression was made between the PMV and the real thermal sensation in three ways: S × PMV_tabulated (R² = 0.1749), S × PMV_calculated (R ² = 0.7481) and S × PMV_measured (R² = 0.7854). It was found that the values measured by the instrument gave a higher coefficient of determination which was chosen for the correction of the table. The correction of the table provides a value of M_predicted, that is a value of metabolic rate that corrects the values provided by the tables of ISO 8996 (2004), by means of a correction coefficient. For the welder's activities in a metal-mechanics industry, tabulated values can be multiplied by the correction coefficient 1.4648 in order to minimize inaccuracies. The PMV_predicted, obtained through the M_predicted, when related to the actual thermal sensation, provides a coefficient of determination of 0.7511, thereby improving the model of the PMV.     

Low-cost sensor to detect overtaking based on optical flow

The automotive industry invests substantial amounts of money in driver-security and driver-assistance systems. We propose an overtaking detection system based on visual motion cues that combines feature extraction, optical flow, solid-objects segmentation and geometry filtering, working with a low-cost compact architecture based on one focal plane and an on-chip embedded processor. The processing is divided into two stages: firstly analog processing on the focal plane processor dedicated to image conditioning and relevant image-structure selection, and secondly, vehicle tracking and warning-signal generation by optical flow, using a simple digital microcontroller. Our model can detect an approaching vehicle (multiple-lane overtaking scenarios) and warn the driver about the risk of changing lanes. Thanks to the use of tightly coupled analog and digital processors, the system is able to perform this complex task in real time with very constrained computing resources. The proposed method has been validated with a sequence of more than 15,000 frames (90 overtaking maneuvers) and is effective under different traffic situations, as well as weather and illumination conditions.     

Background subtraction model based on color and depth cues

Background subtraction consists of segmenting objects in movement in a video captured by a static camera. This is typically performed using color information, but it leads to wrong estimations due to perspective and illumination issues. We show that multimodal approaches based on the integrated use of color and depth cues produce more accurate and robust results than using either data source independently. Depth is less affected by issues such as shadows or foreground objects similar to background. However, objects close to the background may not be detected when using only range information, being color information complementary in those cases. We propose an extension of a well-known background subtraction technique which fuses range and color information, as well as a post-processing mask fusion stage to get the best of each feature. We have evaluated the method proposed using a well-defined dataset and different disparity estimation algorithms, showing the benefits of our method for fusion color and depth cues.