Improvement in thermal endurance of D-mannitol as phase-change material by impregnation into nanosized pores

This paper describes the control of the melting point and improvement of the thermal endurance of D-mannitol (melting point T_m = 440 K) as a phase-change material (PCM) by vacuum impregnation of the PCM into nanosized pores of porous SiO₂ grains. First, we examined the effects of the average pore size (D_P) of porous SiO₂ on T_m and latent heat (L) of PCM/SiO₂ composites. Second, we investigated the thermal endurance of the composites using constant temperature kinetics based on L of the PCM and composites. Third, we performed cyclic tests of melting and freezing on the composite to evaluate leakage of the PCM. Thermophysical properties of the samples were measured by differential scanning calorimetry, and the following results were obtained: (1) The impregnation ratio of the composites was 0.91–0.99; therefore, almost all pores were completely filled with the PCM. (2) T_m shifted to lower temperature with smaller D_P, reaching 413 K in case of the PCM/SiO₂ composite with a D_P of 11.6 nm (3) T_m was derived as a function of D_P from the Gibbs–Thomson equation taking into account the existence of a nonfreezing layer on the surface of the pore wall. (4) The duration of thermal degradation of the PCM/SiO₂ composite with D_P = 11.6 nm was three times longer than that of the pure PCM at a temperature that is 10 K more than each melting point. (5) The PCM/SiO₂ composite with D_P = 11.6 nm can use as a shape-stable PCM composite without leakage of PCM.     

Solid–Liquid Phase Behaviors of Binary Mixtures of Various Partial Acylglycerols by Differential Scanning Calorimetry

Monoacylglycerol (MAG), diacylglycerol (DAG), and triacylglycerol (TAG) are impurities in biodiesel and a major cause of precipitation. Understanding the behavior of such acylglycerols is essential for predicting biodiesel cold flow properties (CFPs). The previous study on MAG/MAG binary mixtures shows that they tend to solidify by forming molecular compounds. In contrast, TAG/TAG mixtures, which have been studied extensively, are commonly eutectic or monotectic systems, in which each component solidifies separately. The present study focuses on binary mixtures of DAG/DAG and different acylglycerol pairs (MAG/DAG, TAG/MAG, and DAG/TAG), and determination of their solid–liquid phase behavior by differential scanning calorimetry. These mixtures are found to behave as eutectic or monotectic systems with no sign of compound formation. As DAG and TAG have lower contents than MAG in biodiesel and they are unlikely to form molecular compounds with MAG, it is suggested that DAG and TAG have little effect on the biodiesel CFPs. Practical Applications: Biodiesel has attracted much interest because its blending with conventional fossil diesel has become more standard with biofuel mandates. From an energy perspective, the solid–liquid phase behavior of acylglycerols will contribute to building prediction models for biodiesel CFPs.     

Evaluation of Three-Dimensional Bioprinted Human Cartilage Powder Combined with Micronized Subcutaneous Adipose Tissues for the Repair of Osteochondral Defects in Beagle Dogs

Cartilage lesions are difficult to repair due to low vascular distribution and may progress into osteoarthritis. Despite numerous attempts in the past, there is no proven method to regenerate hyaline cartilage. The purpose of this study was to investigate the ability to use a 3D printed biomatrix to repair a critical size femoral chondral defect using a canine weight-bearing model. The biomatrix was comprised of human costal-derived cartilage powder, micronized adipose tissue, and fibrin glue. Bilateral femoral condyle defects were treated on 12 mature beagles staged 12 weeks apart. Four groups, one control and three experimental, were used. Animals were euthanized at 32 weeks to collect samples. Significant differences between control and experimental groups were found in both regeneration pattern and tissue composition. In results, we observed that the experimental group with the treatment with cartilage powder and adipose tissue alleviated the inflammatory response. Moreover, it was found that the MOCART score was higher, and cartilage repair was more organized than in the other groups, suggesting that a combination of cartilage powder and adipose tissue has the potential to repair cartilage with a similarity to normal cartilage. Microscopically, there was a well-defined cartilage-like structure in which the mid junction below the surface layer was surrounded by a matrix composed of collagen type I, II, and proteoglycans. MRI examination revealed significant reduction of the inflammation level and progression of a cartilage-like growth in the experimental group. This canine study suggests a promising new surgical treatment for cartilage lesions.     

Experimental analysis of 2D-unsteady temperature field by using Mach-Zehnder interferogram images

A measurement method for an unsteady temperature field by using a Mach-Zehnder interferometer and image processing technique is presented. In this study, the results measured by this method were compared with the calculated results under Reynolds numbers (Re = UL/v) ranging to less than 350 in the steady-state. The unsteady characteristics of the local Nusselt numbers (Nu_x = α_xL/λ) around an elastically vibrating plate were investigated under the conditions that the reduced frequency (N = 1/Ro) ranged from 4.8 to 8.6 and the amplitude of vibration was kept small relative to the plate length. In this study it was clarified that the distributions of the Local Nusselt numbers were observed flutteringly, and that the phase of the time-averaged Nusselt number is delayed compared to the phase of the velocity at the trailing edge. These results indicate that the enhancement of the time-averaged heat transfer coefficient around the vibrating plate depended on the Rossby number. © 1997 Scripta Technica. Inc. Heat Trans Jpn Res. 25 (2): 88–102, 1996     

Thermal diffusivity and porosity of solid materials by the electromagnetic ultrasonic technique. Part 3—simultaneous measurement of ultrasonic velocity and thermal diffusivity

The objective of this study is to evaluate simultaneously the time dependence of the thermal diffusivity of carbon-carbon composites (C/C composites) and their porosity during heat treatment using the electromagnetic ultrasonic technique. This paper describes two kinds of experiments conducted to confirm the principle for simultaneous measurement of both the ultrasonic velocity (used to evaluate the porosity) and the thermal diffusivity at room temperature. For each material, the samples used in both experiments were identical. The ultrasonic velocity of type 304 stainless steel and its thermal diffusivity were 5.85 km/s and 3.8 mm²/s with precisions of ±1.6 and ±8 percent, respectively. The ultrasonic velocity of a two-dimensional woven C/C composite and its thermal diffusivity were 2.86 km/s and 4.8 mm²/s with precisions of ±5.0 and ±8 percent, respectively. The results appear to indicate that the electromagnetic ultrasonic technique can measure the ultrasonic velocity and the thermal diffusivity simultaneously and that it is also applicable to C/C composites. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(5): 308–322, 1996     

Hemicellulose Composition in Different Cell Wall Fractions Obtained using a DMSO/LiCl Wood Solvent System and Enzyme Hydrolysis

In our previous studies on the relationships between lignin structure and hemicellulose composition in a wide range of hardwood species, we showed that the higher the syringyl ratio, the higher the xylan/mannan ratio. In this study, the relationship of the syringyl ratio and xylan/mannan ratio was further studied using fractions obtained by stepwise extraction of finely milled beech wood by use of aqueous dioxane and subsequent dimethyl sulfoxide (DMSO)/LiCl solvents with increasing LiCl concentration. Each soluble fraction obtained with a different LiCl concentration was compared with the corresponding insoluble residue, and it was shown that both the syringyl ratio and xylan/mannan ratio were always higher in the insoluble fraction. To analyze polysaccharides closely located with lignin, milled wood lignin (MWL), and cellulolytic enzyme lignin (CEL) obtained by enzyme treatment after DMSO/LiCl swelling were investigated. Although the xylan/mannan ratio of MWL was higher, that of CEL with more than 80% lignin yield was lower.     

Electron beam sterilization of cyclo olefin polymer leads to polymer degradation and production of alkyl radicals

We investigated the effects of electron‐beam (EB) sterilization on syringe barrels manufactured from cyclo olefin polymer (COP). The chemical structure of the polymer was determined by interpreting the ¹³C NMR and DEPT‐135 spectra of the COP resin. The antioxidants in the resin were identified by analyzing the liquid chromatography‐photo diode array‐mass spectrometry (LC‐PDA‐MS) data for the methanol extract of the resin and the gas chromatography‐mass spectrometry (GC‐MS) data for the supercritical methanol degradation products of the extract. NMR and LC‐PDA‐MS analyses revealed that EB sterilization produces degradation products in the COP main chain and reduces the quantity of the antioxidants in the COP resin. ESR spectra of the EB‐sterilized syringe barrels indicated the presence and location of alkyl radicals, which were generated in the COP main chain by EB sterilization. ESR analyses also indicated that the quantity of alkyl radicals decreased over time. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43498.     

Polyacene capacitors

We fabricated two types of polyacene capacitor with extremely stable polyacenic semiconductor (PAS) as the positive and negative electrodes. The first one is a coin-type PAS capacitor (six different sizes), which possesses large capacity with high reliability. Its capacity is much larger than that of the conventional electric double-layer capacitor which uses activated carbon as electrode. PAS capacitor can maintain more than 70% of the initial capacity even after 100 000 cycles. Moreover, this capacitor can be charged and discharged in a few minutes as well as at low rate. The second one is a cylinder-type PAS capacitor (diameter: 18 mm, height: 65 mm) which shows high capacity of 100 F and can discharge at the extremely high rate of 80 C. The coin-type PAS capacitor is currently used for memory back-up of electrical and communication equipment, and the cylinder-type is considered to be useful as power back-up for starting drive parts of electric equipment which needs high power density.