Series resonant ZCS‐PFM DC‐DC power converter with high‐frequency high‐voltage transformer link for high‐power magnetron drive

This paper presents a single lossless inductive snubber‐assisted ZCS‐PFM series resonant DC‐DC power converter with a high‐frequency high‐voltage transformer link for industrial‐use high‐power magnetron drive. The current flowing through the active power switches rises gradually at a turned‐on transient state with the aid of a single lossless snubber inductor, and ZCS turn‐on commutation based on overlapping current can be achieved via the wide range pulse frequency modulation control scheme. The high‐frequency high‐voltage transformer primary side resonant current always becomes continuous operation mode, by electromagnetic loose coupling design of the high‐frequency high‐voltage transformer and the magnetizing inductance of the high‐frequency high‐voltage transformer. As a result, this high‐voltage power converter circuit for the magnetron can achieve a complete zero current soft switching under the condition of broad width gate voltage signals. Furthermore, this high‐voltage DC‐DC power converter circuit can regulate the output power from zero to full over audible frequency range via the two resonant frequency circuit design. Its operating performances are evaluated and discussed on the basis of the power loss analysis simulation and the experimental results from a practical point of view. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 79–87, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20126     

Crystallization process and magnetic properties of Fe100−x,B x (10 ≦ × ≦ 35) amorphous alloys and supersaturated state of boron inα-Fe

Amorphous specimens of Fe_100–x B _x were prepared in the range 10 × 35 at % B by a single-roller method. The crystallization process and the boron concentration dependence of the Curie temperature were examined by differential scanning calorimetry, X-ray diffraction, Mössbauer spectroscopy and magnetic measurements. Two-step crystallization was observed in specimens with× < 17: amorphous amorphous + boron-supersaturated b c c phase (-Fe(B)) t-Fe₃B +-Fe. A single-Fe(B) phase was not observed. The transition temperature from t-Fe₃B to stable (-Fe + t-Fe₂B) sensitively depends on the boron content in the alloys. The crystallization temperature (T _x) of the amorphous alloys was almost unchanged for 17 × 31, but increased remarkably at high boron concentrations of× 33, where the decomposition products consisted of t-Fe₂B and o-FeB. The Curie temperature (T _c) of the amorphous phase was as low as 480 K at× = 10, increased with increasing boron content up to 820 K and then decreased in the high boron concentration alloys of× > 28. A single-Fe(B) phase was not detected in the as-quenched specimens of× = 8 and 10. The phase coexisted with the o-Fe₃B and amorphous phases. The lattice parameter of the phase was 0.2861₀ nm which was smaller than that of pure iron by 2/1000, indicating the substitutional occupation of boron atoms in the b c c lattice.     

Detection of environmental changes from network structure

We studied the networks of the temperature record in the atmosphere. They are made by the strength of the synchronization, including the delay between temperatures at locations on Earth. We consider these locations as nodes, and we consider a pair of locations as a link if the synchronization between them is stronger than a threshold. The network is scale-free, which is thought to contribute to the stability of the climate. This work was presented in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Inorganic/Organic Double‐Network Gels Containing Ionic Liquids

Highly robust ion gels, termed double‐network (DN) ion gels, composed of inorganic/organic interpenetrating networks and a large amount of ionic liquids (ILs), are fabricated. The DN ion gels with an 80 wt% IL content show extraordinarily high mechanical strength: more than 28 MPa of compressive fracture stress. In the DN ion gel preparation, a brittle inorganic network of physically bonded silica nanoparticles and a ductile organic network of polydimethylacrylamide (PDMAAm) are formed in the IL. Because of the different reaction mechanisms of the inorganic/organic networks, the DN ion gels can be formed by an easy and free‐shapeable one‐pot synthesis. They can be prepared in a controllable manner by manipulating the formation order of the inorganic and organic networks via not only multistep but also single‐step processes. When silica particles form a network prior to the PDMAAm network formation, DN ion gels can be prepared. The brittle silica particle network in the DN ion gel, serving as sacrificial bonds, easily ruptures under loading to dissipate energy, while the ductile PDMAAm network maintains the shape of the material by the rubber elasticity. Given the reversible physical bonding between the silica particles, the DN ion gels exhibit a significant degree of self‐recovery by annealing.     

含大剂量功能性油剂的热塑性聚合物母粒SROPE

SROPE技术是用加入第三组分嵌段聚合物的方法使大剂量的功能性油剂混入热塑性聚合物中,制成具有油剂缓慢析出性能的母粒,可赋予聚合物一定的功能性。SROPE技术对于几乎所有的模压和熔融纺丝工艺都有相当广泛的通用性。     

Feasibility study on cellular network analysis with patterned cell culture microdevice

In order to realize cellular network analysis on a chip-based system, our group has been developing a patterned cell culture microdevice with pillars in an array for tapping cells into space surrounded by the pillars. The pillar structures has advantages to trap both adhesive and non-adhesive cells and to precisely control positions of cells and distances between cells for understanding effects of various cell patterns on functions of a cellular network such as cell proliferation, differentiation, and network formation. In this paper, HeLa cell cultivation with the patterned cell culture microdevice having a pillar array fabricated by dry film of thick negative photoresist SU-8 on a glass substrate was executed as a feasibility study on a cellular network analysis. The results revealed that the device performance was found to be enough to culture HeLa cells for more than 48 h. In addition, relative extensibility of blocks of multiple cells compared with single cells tapped on the device was observed. Thus, the patterned cell culture microdevice proposed here could be applicable to analysis of cellular functions.     

局部干法水下Nd:YAG激光焊接技术

本文采用填丝热导焊的方法研究了水下激光焊接的基本物理现象,结果表明,利用气体喷嘴可形成局部干燥空间,其保护效果取决于喷嘴结构和气体流量等参数。喷嘴的外径大小对保护效果影响显著。当保护条件差时,局部干燥空间将有水浸入,导致焊缝由良好保护条件下的浅而表面光滑平整的形状变为深而表面起伏的形状。良好保护条件下的水下焊缝的力学性能和大气中一致。     

Next-generation 10 GBaud module based on emerging SFP+ with host-based EDC [Topics in Optical Communications]

There has been an ongoing trend to require transceivers for use in datacom and telecom switches to be small and have low power dissipation to enable large port count switches. At speeds between 1 and 4 GBaud the SFP form factor is by far the most commonly used. Up to now 10 GBaud transceivers have used larger devices with larger power dissipations. This article describes the SFP+ module being specified by the SFF Committee (SFF 8431) that will enable the same port densities as the SFP module. The adaptive equalizers and high-speed transmission channels required in the switches to make the SFP+ module work successfully are also described