Reprocessing high‐flux polysulfone dialyzers does not negatively impact solute removal in short‐daily online hemodiafiltration

There are no studies evaluating the impact of dialyzer reprocessing on solute removal in short‐daily online hemodiafiltration (OL‐HDF). Our aim was to evaluate the impact of dialyzer reuse on solute removal in daily OL‐HDF and compare with that in high‐flux short‐daily hemodialysis (SDH). Fourteen patients undergoing a SDH program were included. Pre‐dialysis and post‐dialysis blood samples and effluent dialysate were collected in the 1st, 7th, and 13th dialyzer uses in SDH sessions and in daily OL‐HDF sessions. Directly quantified small solute (urea, phosphorus, creatinine, and uric acid) total mass removal (TM_DQ) and clearance (K_DQ) were similar when the 1st, 7th, and 13th dialyzer SDH uses were compared with the 1st, 7th, and 13th daily OL‐HDF uses. TM_DQ and K_DQ of small solutes were similar among analyzed dialyzer uses in SDH sessions and in daily OL‐HDF sessions. β₂‐Microglobulin TM_DQ and K_DQ were statistically higher in daily OL‐HDF dialyzer uses than in the respective SDH uses. There was no difference in β₂‐microglobulin TM_DQ and K_DQ among dialyzer uses in daily OL‐HDF sessions or in SDH sessions. In daily OL‐HDF, albumin loss was significantly different among dialyzer uses (P < 0.001), being lower in the 7th and 13th dialyzer uses than in the first use. Dialyzer reprocessing did not impair solute extraction in daily OL‐HDF. β₂‐Microglobulin removal was greater in daily OL‐HDF than in SDH sessions, without significant differences in other solutes extraction. There was a significant reduction in intradialytic albumin loss with dialyzer reprocessing in daily OL‐HDF sessions.     

A review of self-assembled monolayers as potential terahertz frequency tunnel diodes

In this review, we describe the principles of the tunnel junction, self-assembled monolayer （SAM） application techniques, experimental testbed fabrication, and characterization of the films and devices. In addition, techniques for directed application, removal, and functionalization of the monolayers are discussed. Bottom-up fabrication techniques have seen increased attention because of their versatility and ease of use. These films see mechanical uses as surface modifiers and micro-scale lubricants. Advances in nanowatt electronics and ultra-low power sensors have opened up an energy harvesting niche for solutions which would have proven ineffective just some years ago. The focus of this study is the two- terminal junction which has potential applications in THz rectification for energy harvesting, medical imaging, and defense sensing. The quantum theory of operation behind these devices is touched on briefly---describing tunneling through the organic monolayers. Commentary on trends in research and potential future work are presented as well.     

A colored avocado seed extract as a potential natural colorant

There is an increasing consumer demand for and scientific interest in new natural colorants. Avocado (Persea americana) seed when crushed with water develops an orange color (= 480 nm) in a time-dependent manner. Heat treatment of the seed prevented color development, whereas the addition of exogenous polyphenol oxidase (PPO), but not peroxidase restored color development. Color development was also inhibited by the addition of tropolone, an inhibitor of PPO. Color formation resulted in a decrease in the concentration of polyphenols indicating utilization for color formation. The orange color intensified as the pH was adjusted from 2.0 to 11.0, and these changes were only partially reversible when pH was adjusted from 7.5 to 11.0 in the presence of oxygen, but completely reversible when the pH was changed in the absence of oxygen. The color was found to be stable in solution at -18 °C for 2 mo. These results suggest that the avocado seed may be a potential source of natural colorant, and that color development is PPO-dependent. PRACTICAL APPLICATION: There is growing public and scientific interest in the development of natural alternatives to synthetic colorants in foods. Extracts of turmeric, paprika, and beets are examples of food-derived natural colorants. Avocado seeds, which represent an under-utilized waste stream, form a stable orange color when crushed in the presence of air. Our data indicate that avocado seed represents a potential source of new natural colorants for use in foods.     

Seismic response analysis of skew bridges with pounding deck-abutment joints

In this paper the seismic response of short skew bridges with deck-abutment pounding joints is revisited. The permanent deck rotations and transverse displacements of such bridges after the recent earthquake in Chile created an incentive to revisit their non-conventional behaviour. A novel non-smooth rigid body approach is proposed to analyze the seismic response of pounding skew bridges which involves oblique frictional multi-contact phenomena. The coupling of the response, due to contact, is analysed in depth. It is shown that the tendency of skew bridges to exhibit transverse displacements and/or rotate (and hence unseat) after deck-abutment collisions is not a factor of the skew angle alone, but rather of the plan geometry plus friction. This is expressed with proposed dimensionless criteria. The study also unveils that the coupling is more pronounced in the low range of the frequency spectrum (short-period excitations/flexible structures) and presents novel dimensionless response spectra for the transverse displacements and rotations, triggered by oblique contact in a skew bridge subsystem. Despite the complexity of the response, the proposed spectra highlight a clear pattern. The dimensionless rotations, arising from contact, decline as the ratio of the structural versus excitation frequency increases and become practically negligible in the upper range of the frequency spectrum. Finally, a pilot application to a typical skew bridge is presented.     

Development and validation of a transition boiling model for RELAP5/MOD3 reflood simulation

The current version of the RELAP5/MOD3.1 code significantly underpredicts the transition boiling heat transfer during reflooding of hot fuel rods. In order to extend the code’s range of application for LOCA and degraded core analyses, a new transition boiling model has been developed, assessed and implemented. The model is based entirely on local state variables calculated by the code (wall and fluid temperatures, pressure, void fraction, mass flux and static quality) and does not rely on other history parameters, such as quench position or CHF and minimum film boiling temperatures. A number of separate-effect and bundle experiments are analyzed with the modified version of the code, and the predictions are compared with the ones obtained by the current version and with available experimental data. In all cases, the predictions of the improved model better fit the measured data. The shape of the new temperature curves is more physically and conceptually sound than the one calculated by the current version of the code.     

Did the 65 mph speed limit save lives?

In 1987, most states raised the speed limit from 55 to 65 mph on portions of their rural interstate highways. There was intense debate about the increase, and numerous evaluations were conducted afterwards. These evaluations share a common problem: they only measure the local effects of the change. But the change must be judged by its system-wide effects. In particular, the new 65 mph limit allowed the state highway patrols to shift their resources from speed enforcement on the interstates to other safety activities and other highways--a shift many highway patrol chiefs had argued for. If the chiefs were correct, the new allocation of patrol resources should lead to a reduction in statewide fatality rates. Similarly, the chance to drive faster on the interstates should attract drivers away from other, more dangerous roads, again generating system-wide consequences. This study measures these changes and obtains surprising results. We find that the 65 mph limit reduced statewide fatality rates by 3.4% to 5.1%, holding constant the effects of long-term trend, driving exposure, seat belt laws, and economic factors.     

Transformation of the Lyme disease spirochete Borrelia burgdorferi with heterologous DNA

Studies of the spirochete Borrelia burgdorferi have been hindered by the scarcity of genetic tools that can be used in these bacteria. For the first time, a method has been developed by which heterologous DNA (DNA without a naturally occurring B. burgdorferi homolog) can be introduced into and persistently maintained by B. burgdorferi. This technique uses integration of circular DNA into the bacterial genome via a single-crossover event. The ability to transform B. burgdorferi with heterologous DNA will now permit a wide range of experiments on the biology of these bacteria and their involvement in the many facets of Lyme disease.     

A longitudinal study of blood pressure in relation to performance on the Wechsler Adult Intelligence Scale

A growth curve analysis was used to examine estimated longitudinal decline (over 19 years) on the Wechsler Adult Intelligence Scale (WAIS; D. Wechsler, 1955) in relation to arterial hypertension and blood pressure (BP) for 55 men and 85 women (40 to 70 years old) who were free from overt major coexisting diseases. BP was associated with longitudinal decline for Visualization-Performance (VP) ability and Speed. Hypertension was a weaker predictor of VP and was unrelated to Speed. Age effects on VP were overestimated when averaged BP level, particularly systolic BP, was not controlled statistically. It was concluded that initial BP level and hypertension predict age-related longitudinal decline in specific major abilities assessed by the WAIS but that BP averaged over examinations is a stronger predictor.     

A three-unit standby redundant system with repair and preventive maintenance

This paper deals with the reliability of a renewable three-unit system under preventive maintenance activity. The Laplace transform of the reliability function and the mean lifetime of the system have been obtained under the assumption that the failure times, repair times, inspection times and maintenance times are random variables having different distributions. Some special cases also have been obtained.     

The herpes simplex virus type 1 origin binding protein. Specific recognition of phosphates and methyl groups defines the interacting surface for a monomeric DNA binding domain in the major groove of DNA

The UL9 gene of herpes simplex virus type 1 (HSV-1) encodes an origin binding protein (OBP). It is an ATP-dependent DNA helicase and a sequence-specific DNA-binding protein. The latter function is carried out by the C-terminal domain of OBP (DeltaOBP). We have now performed a quantitative analysis of the interaction between DeltaOBP and its recognition sequence, GTTCGCAC, in oriS. Initially optimal conditions for binding were carefully determined. We observed that complexes with different electrophoretic mobilities were formed. A cross-linking experiment demonstrated that nonspecific complexes containing 2 or more protein monomers per DNA molecule were formed at high protein concentrations. The specific complex formed at low concentrations of DeltaOBP had an electrophoretic mobility corresponding to a 1:1 complex. We then demonstrated that the methyl groups of thymine in the major groove were essential for high affinity binding. Changes in the minor groove had considerably smaller effects. Ethylation interference experiments indicated that specific contacts were made between OBP and three phosphates in the recognition sequence. Finally, these observations were used to present a model of the surface of DNA that interacts with DeltaOBP in a sequence-specific manner.