Determination of omega-6 and omega-3 fatty acids in pork adipose tissue with nondestructive Raman and fourier transform infrared spectroscopy

In order to predict omega-6 and omega-3 fatty acids in the diet of humans, seventy-three pork back fat adipose tissue samples were measured with Raman spectroscopy directly on adipose tissue and on melted fat. Melted fat samples were, in addition, measured with Fourier transform infrared (FT-IR) spectroscopy. Gas chromatography analyses were conducted as the reference analysis. Partial least squares regression (PLSR) was used to calibrate and validate all models predicting omega-3 and omega-6 fatty acids contents from spectra. Omega-6 fatty acids in melted fat measured with FT-IR was predicted with a correlation coefficient (R) of 0.93 and a root mean square error of cross-validation (RMSECV) of 1.61% of the total amount of fatty acids. Raman spectra measured on melted fat gave a prediction of omega-6 fatty acids with R=0.97, and RMSECV=0.99% of total amount of fatty acids. Omega-6 fatty acids were predicted with R=0.94, and RMSECV=1.50% of the total amount of fatty acids using Raman spectra recorded on adipose tissue. For omega-3 fatty acids, the highest R=0.91, and lowest RMSECV=0.23% of the total amount of fatty acids were obtained from Raman spectra acquired on melted fat. FT-IR and Raman spectroscopy may be used as rapid, nondestructive methods to determine omega-6 and omega-3 fatty acids in melted fat. Raman spectroscopy can also be used directly on adipose tissue.     

Analysis of lipoproteins by capillary zone electrophoresis in microfluidic devices: assay development and surface roughness measurements

The development of a new assay for lipoproteins by capillary electrophoresis in fused-silica capillaries and in glass microdevices is described in this paper. The separation of low-density (LDL) and high-density (HDL) lipoproteins by capillary zone electrophoresis is demonstrated in fused-silica capillaries with both UV absorption and laser-induced fluorescence detection. This separation was accomplished using Tricine buffer (pH 9.0) with methylglucamine added as a dynamic coating. With UV detection, LDL eluted as a relatively sharp peak with a migration time of approximately 11 min and HDL eluted as a broad peak with a migration time of 12.5 min. Fluorescence detection of lipoproteins stained with NBD-ceramide was used with the same buffer system to give comparable results. Furthermore, fluorescence staining of human serum samples yielded results similar to the fluorescently stained LDL and HDL fractions, showing that this method can be used to quantify lipoproteins in serum samples. The method was also used to detect lipoproteins in glass micro-CE devices. Very similar results were obtained in microdevices although with much faster analysis times, LDL eluted as a sharp peak at approximately 25 s and HDL as a broad peak at slightly longer time. In addition, higher resolution was obtained on chips. To our knowledge, these results show the first separation and detection of lipoproteins in a microfluidic device using native serum samples. Atomic force microscopy was used to characterize the rms surface roughness (Rq) of microfluidic channels directly. Devices with different surface roughness values were fabricated using two different etchants for Pyrex wafers with a polysilicon masking layer. Using 49% HF, the measured roughness is Rq = 10.9 +/- 1.6 nm and with buffered HF (NH4F + HF) the roughness is Rq = 2.4 +/- 0.7 nm. At this level of surface roughness, there is no observable effect on the performance of the devices for this lipoprotein separation.     

Periodic Large‐Area Metallic Split‐Ring Resonator Metamaterial Fabrication Based on Shadow Nanosphere Lithography

A fast and cheap, large‐area (>1 cm²), high‐coverage fabrication technique for periodic metallic split‐ring resonator metamaterials is presented, which allows control of inner‐ and outer‐ring diameters, gap angles, as well as thickness and periodicity. This method, based on shadow nanosphere lithography, uses tilted‐angle‐rotation thermal evaporation onto Langmuir–Blodgett‐type monolayers of close‐packed polystyrene nanospheres. Excellent agreement of the process parameters with a simplified model is demonstrated. Pronounced, tunable optical metamaterial resonances in the range of 100 THz are consistent with simulations.     

Hierarchically engineered fibrous scaffolds for bone regeneration

Surface properties of biomaterials play a major role in the governing of cell functionalities. It is well known that mechanical, chemical and nanotopographic cues, for example, influence cell proliferation and differentiation. Here, we present a novel coating protocol to produce hierarchically engineered fibrous scaffolds with tailorable surface characteristics, which mimic bone extracellular matrix. Based on the sol–gel method and a succession of surface treatments, hollow electrospun polylactic acid fibres were coated with a silicon–calcium–phosphate bioactive organic–inorganic glass. Compared with pure polymeric fibres that showed a completely smooth surface, the coated fibres exhibited a nanostructured topography and greater roughness. They also showed improved hydrophilic properties and a Young''s modulus sixfold higher than non-coated ones, while remaining fully flexible and easy to handle. Rat mesenchymal stem cells cultured on these fibres showed great cellular spreading and interactions with the material. This protocol can be transferred to other structures and glasses, allowing the fabrication of various materials with well-defined features. This novel approach represents therefore a valuable improvement in the production of artificial matrices able to direct stem cell fate through physical and chemical interactions.     

Pyrolytic deposition of nanostructured titanium carbide coatings on the surface of multiwalled carbon nanotubes

Nanostructured titanium carbide coatings have been deposited on the surface of multiwalled carbon nanotubes (MWCNTs) by the MOCVD method with bis(cyclopentadienyl)titanium dichloride precursor. The obtained TiC/MWCNT hybrid materials were characterized by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. It is established that a TiC coating deposits onto the MWCNT surface with the formation of a core–shell (MWSNT–TiC) type structure.     

Dynamic modeling of the tradeoff between productivity and safety in critical engineering systems

Short-term tradeoffs between productivity and safety often exist in the operation of critical facilities such as nuclear power plants, offshore oil platforms, or simply individual cars. For example, interruption of operations for maintenance on demand can decrease short-term productivity but may be needed to ensure safety. Operations are interrupted for several reasons: scheduled maintenance, maintenance on demand, response to warnings, subsystem failure, or a catastrophic accident. The choice of operational procedures (e.g. timing and extent of scheduled maintenance) generally affects the probabilities of both production interruptions and catastrophic failures. In this paper, we present and illustrate a dynamic probabilistic model designed to describe the long-term evolution of such a system through the different phases of operation, shutdown, and possibly accident. The model's parameters represent explicitly the effects of different components' performance on the system's safety and reliability through an engineering probabilistic risk assessment (PRA). In addition to PRA, a Markov model is used to track the evolution of the system and its components through different performance phases. The model parameters are then linked to different operations strategies, to allow computation of the effects of each management strategy on the system's long-term productivity and safety. Decision analysis is then used to support the management of the short-term trade-offs between productivity and safety in order to maximize long-term performance. The value function is that of plant managers, within the constraints set by local utility commissions and national (e.g. energy) agencies. This model is illustrated by the case of outages (planned and unplanned) in nuclear power plants to show how it can be used to guide policy decisions regarding outage frequency and plant lifetime, and more specifically, the choice of a reactor tripping policy as a function of the state of the emergency core cooling subsystem.     

The Janus‐SAM Approach for the Flexible Functionalization of Gold and Titanium Oxide Surfaces

A novel approach is developed to address the requirement of multiple stamps and inks for microcontact printing (µCP) onto different substrate surfaces. This approach relies on µCP one divalent molecule, which is able to form Janus self‐assembled monolayers (JSAMs) with a labile cleavable centre, thus providing a facile method for the chemical derivatization of different substrate surfaces. This study presents an answer to the challenges presented within a highly versatile application, µCP. N‐(3‐diethylphosphatoxy)propyl‐11‐mercaptoundecanamide is used for the first time as an ink for µCP onto both gold and titanium oxide surfaces, utilizing the same polydimethylsiloxane stamp. Following printing, the JSAMs are enzymatically treated on these two different substrates to reveal different functional groups. The newly formed surfaces are subjected to additional surface reactions and used for the chemisorption of bovine serum albumin. At each stage, these JSAMs are characterized by X‐ray photoelectron spectroscopy and dynamic water‐contact‐angle measurements. Confocal laser scanning microscopy is used for the characterization of the adsorbed proteins.     

Reduction of tablet weight variability by optimizing paddle speed in the forced feeder of a high-speed rotary tablet press

Context: Tableting is a complex process due to the large number of process parameters that can be varied. Knowledge and understanding of the influence of these parameters on the final product quality is of great importance for the industry, allowing economic efficiency and parametric release.

Objective: The aim of this study was to investigate the influence of paddle speeds and fill depth at different tableting speeds on the weight and weight variability of tablets.

Materials and methods: Two excipients possessing different flow behavior, microcrystalline cellulose (MCC) and dibasic calcium phosphate dihydrate (DCP), were selected as model powders. Tablets were manufactured via a high-speed rotary tablet press using design of experiments (DoE). During each experiment also the volume of powder in the forced feeder was measured.

Results and discussion: Analysis of the DoE revealed that paddle speeds are of minor importance for tablet weight but significantly affect volume of powder inside the feeder in case of powders with excellent flowability (DCP). The opposite effect of paddle speed was observed for fairly flowing powders (MCC). Tableting speed played a role in weight and weight variability, whereas changing fill depth exclusively influenced tablet weight.

Conclusion: The DoE approach allowed predicting the optimum combination of process parameters leading to minimum tablet weight variability. Monte Carlo simulations allowed assessing the probability to exceed the acceptable response limits if factor settings were varied around their optimum. This multi-dimensional combination and interaction of input variables leading to response criteria with acceptable probability reflected the design space.     

Rethinking Battered Woman Syndrome Evidence: The Impact of Alternative Forms of Expert Testimony on Mock Jurors' Decisions.

Participants (N=172) were presented with a criminal homicide trial involving a battered woman who had killed her abuser. Within the trial stimulus, the imminence of the batterer's threat was systematically manipulated such that participants were presented with either a case in which the woman killed her abuser during a direct confrontation or while he lay sleeping. Within these two conditions, the presence of expert testimony pertaining to battered women (battered woman syndrome, social/agency, none) was systematically varied. Results indicated that the imminence of the batterer's threat influenced the participants' judgments, but the impact of this variable on judgments interacted with the presence of the expert testimony. The implications of these findings are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)