A New Distribution System Reconfiguration Approach Using Optimum Power Flow and Sensitivity Analysis for Loss Reduction

This paper presents a new approach for distribution system reconfiguration (DSR) based on optimum power flow (OPF) in which the branch statuses (open/close) are represented by continuous functions. In the proposed approach, all branches are initially considered closed, and from the OPF results, a heuristic technique is used to determine the next loop to be broken by opening one switch. Then the list of switches that are candidates to be opened is updated, and the above process is repeated until all loops are broken, making the distribution system radial. This paper includes results and comparisons on test systems utilized in three classical papers published in the technical literature, as well as in a previous paper by the authors. Results obtained on a real large-scale distribution system are also presented     

Parallel Monte Carlo Driver (PMCD)—a software package for Monte Carlo simulations in parallel

Thanks to the dramatic decrease of computer costs and the no less dramatic increase in those same computer's capabilities and also thanks to the availability of specific free software and libraries that allow the set up of small parallel computation installations the scientific community is now in a position where parallel computation is within easy reach even to moderately budgeted research groups. The software package PMCD (Parallel Monte Carlo Driver) was developed to drive the Monte Carlo simulation of a wide range of user supplied models in parallel computation environments. The typical Monte Carlo simulation involves using a software implementation of a function to repeatedly generate function values. Typically these software implementations were developed for sequential runs. Our driver was developed to enable the run in parallel of the Monte Carlo simulation, with minimum changes to the original code that implements the function of interest to the researcher. In this communication we present the main goals and characteristics of our software, together with a simple study its expected performance. Monte Carlo simulations are informally classified as “embarrassingly parallel”, meaning that the gains in parallelizing a Monte Carlo run should be close to ideal, i.e. with speed ups close to linear. In this paper our simple study shows that without compromising the easiness of use and implementation, one can get performances very close to the ideal.     

A new approach to designing reduced scale thermal-hydraulic experiments

Reduced scale experiments are often employed in engineering because they are much cheaper than real scale testing. Unfortunately, though, it is difficult to design a thermal-hydraulic circuit or equipment in reduced scale capable of reproducing, both accurately and simultaneously, all the physical phenomena that occur in real scale and operating conditions. This paper presents a methodology to designing thermal-hydraulic experiments in reduced scale based on setting up a constrained optimization problem that is solved using genetic algorithms (GAs). In order to demonstrate the application of the methodology proposed, we performed some investigations in the design of a heater aimed to simulate the transport of heat and momentum in the core of a pressurized water reactor (PWR) at 100% of nominal power and non-accident operating conditions. The results obtained show that the proposed methodology is a promising approach for designing reduced scale experiments.     

A simulation analysis of the detectability of understory burns in miombo woodlands

The miombo woodlands of southern Africa are one of the most extensively burned biomes in the tropics. The detectability of understory burns in these woodlands was assessed with a sensitivity analysis approach, based on a hybrid geometrical-optical radiative transfer model. Model input data were obtained from a variety of sources, including field biometry and spectroradiometry, and satellite data. The effects of variable tree percent cover, leaf area index, stand density, burn scar age, illumination and observation geometry, and spectral region, were taken into account. Detectability of understory burns was defined as the spectral separability of burned and unburned understory, measured with the Jeffries-Matusita distance, for all possible combinations of the green, red, and near-infrared channels of the Moderate Resolution Imaging Spectrometer (MODIS) sensor. Single channels, or pairwise combinations of channels perform poorly at detecting understory burns, but a large improvement in detectability is obtained for the combination of the three spectral domains. The detectability of understory burns is largely insensitive to the effects of stand structure and illumination/observation geometry, and depends primarily on burn scar age. Our results agree with those of previous satellite-based studies of burns scar detectability in African savanna woodlands.     

Multipurpose modular experimental station for the DiProI beamline of Fermi@Elettra free electron laser

We present a compact modular apparatus with a flexible design that will be operated at the DiProI beamline of the Fermi@Elettra free electron laser (FEL) for performing static and time-resolved coherent diffraction imaging experiments, taking advantage of the full coherence and variable polarization of the short seeded FEL pulses. The apparatus has been assembled and the potential of the experimental setup is demonstrated by commissioning tests with coherent synchrotron radiation. This multipurpose experimental station will be open to general users after installation at the Fermi@Elettra free electron laser in 2011.     

Effects of ozonized water and heat treatment on the papaya fruit epidermis

This study examined the effects of O₃ and hot water treatments on the epidermis of Golden papaya fruit. Heat treatments were applied in a hot water brushing (HWB) system. Papayas were brushed under a pressurized hot water rinse stage at 45, 55 and 65 °C for 60 s. In the HWB treatment, 4 ppm ozone was applied to the papayas for 1 or 2 min. The results show that ozone applications did not affect the fruit's cuticular surface, while heat treatments allowed natural fissures on the fruit epidermis to recover. Several crystalloid forms were identified on the epidermis of the papayas after the heat treatments. The predominant crystalloid forms on papayas are tubular and there is a positive response to temperature; the higher the temperature, the larger and more frequent the tubular crystalloids.     

Indoor air quality in Portuguese schools: levels and sources of pollutants

Indoor air quality (IAQ) parameters in 73 primary classrooms in Porto were examined for the purpose of assessing levels of volatile organic compounds (VOCs), aldehydes, particulate matter, ventilation rates and bioaerosols within and between schools, and potential sources. Levels of VOCs, aldehydes, PM_2.5, PM₁₀, bacteria and fungi, carbon dioxide (CO₂), carbon monoxide, temperature and relative humidity were measured indoors and outdoors and a walkthrough survey was performed concurrently. Ventilation rates were derived from CO₂ and occupancy data. Concentrations of CO₂ exceeding 1000 ppm were often encountered, indicating poor ventilation. Most VOCs had low concentrations (median of individual species <5 μg/m³) and were below the respective WHO guidelines. Concentrations of particulate matter and culturable bacteria were frequently higher than guidelines/reference values. The variability of VOCs, aldehydes, bioaerosol concentrations, and CO₂ levels between schools exceeded the variability within schools. These findings indicate that IAQ problems may persist in classrooms where pollutant sources exist and classrooms are poorly ventilated; source control strategies (related to building location, occupant behavior, maintenance/cleaning activities) are deemed to be the most reliable for the prevention of adverse health consequences in children in schools.     

Frequency domain analysis of acoustic wave propagation in heterogeneous media considering iterative coupling procedures between the method of fundamental solutions and Kansa's method

Acoustic wave propagation in heterogeneous media is a topic of significant interest in many areas of science and engineering, including aeroacoustics and sound propagation in oceans. In the present work, numerical frequency domain models based on the joint use of the method of fundamental solutions and of the radial basis function collocation method (also known as Kansa's method) are discussed. In this context, the method of fundamental solutions is used to model the homogeneous part of the propagation domain, while Kansa's method is employed to model the presence of heterogeneities. The coupling between the two parts of the propagation domain is performed iteratively, allowing independent spatial discretization between the different subdomains of the model (i.e. matching collocation points at common surfaces are not necessary). Additionally, an optimised algorithm, based on the use of a varying relaxation parameter, is employed to speed up and/or to ensure the convergence of the iterative coupling process. At the end of the paper, numerical results illustrate the applicability and potentialities of the proposed formulations. Copyright © 2011 John Wiley & Sons, Ltd.     

Influence of heat-treatment environment on Ni-ferrite nanoparticle formation from coconut water precursor

The kinetics of formation of NiFe₂O₄ nanoparticles were investigated where the nanoparticles were produced by the proteic-sol–gel method using coconut water followed by annealing in (i) air, (ii) air in the presence of boron nitride (BN), or (iii) nitrogen. The sample dried at 473 K for 5.5 h was composed of small disordered NiFe₂O₄ nanoparticles in a superparamagnetic state as determined from Mössbauer spectroscopy. In general, heat treatment at high temperature leads to a nanocomposite rich in NiFe₂O₄. In air, annealing at 1173 K for 8 h favored the formation of the magnetically ordered NiFe₂O₄ inverse spinel structure, with bulk characteristics and average crystal sizes of approximately 66 nm. In a nitrogen atmosphere and in compacted BN powder under air atmosphere, the NiFe₂O₄ spinel structure stabilized for temperatures up to 873 and 773 K, respectively, however, decomposition of the NiFe₂O₄ phase into other undesired structures was observed above 873 K.