Biomechanical demands of percussive techniques in the context of early stone toolmaking

Recent discoveries in archaeology and palaeoanthropology highlight that stone tool knapping could have emerged first within the genera Australopithecus or Kenyanthropus rather than Homo. To explore the implications of this hypothesis determining the physical demands and motor control needed for performing the percussive movements during the oldest stone toolmaking technology (i.e. Lomekwian) would help. We analysed the joint angle patterns and muscle activity of a knapping expert using three stone tool replication techniques: unipolar flaking on the passive hammer (PH), bipolar (BP) flaking on the anvil, and multidirectional and multifacial flaking with free hand (FH). PH presents high levels of activity for Biceps brachii and wrist extensors and flexors. By contrast, BP and FH are characterized by high solicitation of forearm pronation. The synergy analyses depict a high muscular and kinematic coordination. Whereas the muscle pattern is very close between the techniques, the kinematic pattern is more variable, especially for PH. FH displays better muscle coordination and conversely lesser joint angle coordination. These observations suggest that the transition from anvil and hammer to freehand knapping techniques in early hominins would have been made possible by the acquisition of a behavioural repertoire producing an evolutionary advantage that gradually would have been beneficial for stone tool production.     

Electrical transport mechanisms of Neodymium-doped rare-earth semiconductors

Journal of Materials Science: Materials in Electronics - This study reports the electrical properties of Nd-doped cerium oxide (CeO2) films synthesized by microwave assisted hydrothermal using a...     

Study of the Role of the Tyrosine Kinase Receptor MerTK in the Development of Kidney Ischemia-Reperfusion Injury in RCS Rats

Renal ischaemia reperfusion (I/R) triggers a cascade of events including oxidative stress, apoptotic body and microparticle (MP) formation as well as an acute inflammatory process that may contribute to organ failure. Macrophages are recruited to phagocytose cell debris and MPs. The tyrosine kinase receptor MerTK is a major player in the phagocytosis process. Experimental models of renal I/R events are of major importance for identifying I/R key players and for elaborating novel therapeutical approaches. A major aim of our study was to investigate possible involvement of MerTK in renal I/R. We performed our study on both natural mutant rats for MerTK (referred to as RCS) and on wild type rats referred to as WT. I/R was established by of bilateral clamping of the renal pedicles for 30′ followed by three days of reperfusion. Plasma samples were analysed for creatinine, aspartate aminotransferase (ASAT), lactate dehydrogenase (LDH), kidney injury molecule -1 (KIM-1), and neutrophil gelatinase-associated lipocalin (NGAL) levels and for MPs. Kidney tissue damage and CD68-positive cell requirement were analysed by histochemistry. monocyte chemoattractant protein-1 (MCP-1), myeloperoxidase (MPO), inducible nitric oxide synthase (iNOS), and histone 3A (H3A) levels in kidney tissue lysates were analysed by western blotting. The phagocytic activity of blood-isolated monocytes collected from RCS or WT towards annexin-V positive bodies derived from cultured renal cell was assessed by fluorescence-activated single cell sorting (FACS) and confocal microscopy analyses. The renal I/R model for RCS rat described for the first time here paves the way for further investigations of MerTK-dependent events in renal tissue injury and repair mechanisms.     

How To Find a Needle (or Anything Else) in a Haystack: Two-Dimensional Correlation Spectroscopy-Filtering with Iterative Random Sampling Applied to Pharmaceutical Heparin

Risks of contamination of the major clinical anticoagulant heparin can arise from deliberate adulteration with unnatural or natural polysaccharides, including heparin from other animal sources, other natural products, or artifacts of manufacture, and these can escape detection by conventional means. Currently, there is no generally applicable, objective test recommended by regulators that can detect these in pharmaceutical heparin, and this continues to leave heparin exposed to contamination risks. Two-dimensional correlation spectroscopic-filtering with iterative random sampling (2D-COS-firs) is reported. It employs a difference covariance matrix with iterative random sampling, and is capable of revealing contamination in pharmaceutical heparin to a high level of sensitivity irrespective of the nature of those features. The technique is suitable to any situation in which a comparison of a single entity to a family of heterogeneous entities, particularly natural products and biosimilars, needs to be made, and will find application in pharmaceutical monitoring, manufacturing quality control, materials science, biotechnology, and metabolomic investigations.     

Scope Oriented Thermoeconomic analysis of energy systems. Part II: Formation Structure of Optimality for robust design

This paper represents the Part II of a paper in two parts. In Part I the fundamentals of Scope Oriented Thermoeconomics have been introduced, showing a scarce potential for the cost accounting of existing plants; in this Part II the same concepts are applied to the optimization of a small set of design variables for a vapour compression chiller. The method overcomes the limit of most conventional optimization techniques, which are usually based on hermetic algorithms not enabling the energy analyst to recognize all the margins for improvement. The Scope Oriented Thermoeconomic optimization allows us to disassemble the optimization process, thus recognizing the Formation Structure of Optimality, i.e. the specific influence of any thermodynamic and economic parameter in the path toward the optimal design. Finally, the potential applications of such an in-depth understanding of the inner driving forces of the optimization are discussed in the paper, with a particular focus on the sensitivity analysis to the variation of energy and capital costs and on the actual operation-oriented design.     

Influence of the hydrogen reduction time and temperature on the morphology evolution and hematite/magnetite conversion of spindle-type hematite nanoparticles

We report on the transformation via hydrogen reduction of spindle-type hematite nanoparticles into hematite/magnetite hybrid iron oxide particles. The transformation process consists of the reduction of nanoparticles powder in an autoclave using hydrogen gas at a fixed pressure of 11 bars. Both temperature and time of reduction are varied between 300 °C to 360 °C and 0 to 45 h. X-Ray powder diffraction data on the obtained powder and corresponding Rietveld refinement allow the amount of reduced hematite to be determined as a function of these two parameters. Kinetics parameters are measured and an estimation of the activation energy is obtained through linearization of the Arrhenius equation. While reduction is dramatically accelerated at higher temperature, the morphology of the nanoparticles only remain qualitatively unchanged at 300 °C as seen from transmission electron microscopy images. The mechanisms underlying morphology changes are still under study and seem to be closely related to reactor pressure.     

Geotextile filtration opening size under tension and confinement

Nonwoven geotextiles have been used as filters in geotechnical and geoenvironmental works for half a century. They are easy to install and can be specified to meet the requirements for proper filter performance. There are situations where a geotextile filter may be subjected to tensile loads, which may alter relevant filter properties, such as its filtration opening size. Examples of such situations are silty fence applications, geotextile separators, geotextile tubes and geotextiles under embankments on soft soils. This paper investigates the effects of tensile strains on geotextile pore dimensions. A special equipment and testing technique allowed tests to be carried out on geotextile specimens subjected to tension and confinement. The results obtained showed that the variation in filtration opening size depends on the type of strain state the geotextile is subjected, under which the geotextile pore diameter may remain rather constant or increase significantly. However, confinement reduces the geotextile filtration opening size independent on the strain mobilised. An upper bound for the filtration opening size of strained nonwoven geotextiles is introduced and was satisfactory for the geotextile products tested.     

Large-scale load capacity tests on a geosynthetic encased column

Stone columns have been used to minimize the settlement of embankments on soft soils but their use in very soft soils can become challenging, partly because of the low confinement provided by the surrounding soil. Geosynthetic encased columns (GECs) have been successfully used to enhance to reduce settlements of embankments on soft soils. This paper describes an investigation on the performance of encased columns constructed on a very soft soil using different types of encasement (three woven geotextiles with different values of tensile stiffness) and different column fill materials (sand, gravel and recycled construction and demolition waste, RCDW). The results of load capacity tests conducted on large-scale models constructed to simulate the different types of GECs indicate that the displacement method adopted during column installation can lead to an enhanced shear strength in the smear zone that develops within the very soft soil. In addition, breakage of the column fill material was found to affect the load-settlement response of gravel and RCDW columns. Furthermore, the excess pore water pressure generated in the surrounding soil during installation, was found to remain limited to radial distances smaller than three times the GEC diameter.     

Battery industry wastewater: Pb removal and produced sludge

The process of neutralization with NaOH, in the presence of Fe(III) salt, of sulphuric acid battery industry wastewater seems to be more suitable than any other process for Pb removal because at the same time, it allows the exploitation of the scavenger action of Fe(III), which is often present in the same wastewater and precipitates as hydroxides. In order to optimize sludge production, a laboratory research study has been carried out to minimize the quantity of Fe(III) to be added. All aspects concerning the chemistry of wastewater have been taken into consideration step by step and discussed. As a result, a process which requires the addition of Fe(III) so that an Fe/Pb ratio, both expressed as ppm, of the order of 0.5 is achieved. The process has been applied to two artificial solutions, characterized by a content of H₂SO₄ of 1000 and 5000 ppm, respectively, and by 10 ppm of Pb, as well as to five samples of wastewater. The proposed process takes about 1 h to perform: 30 min for neutralization up to pH 8.5–9.5 and Fe(III) addition and 30 min for correction in the 9–9.5 pH range and for flocculation with the help of a polyelectrolyte. The Pb concentration of the treated effluent is below 0.2 ppm. Conditions for Pb removal using only NaOH or Na₂CO₃ have also been considered.     

Alternative approaches to trip distribution modelling: A retrospective review and suggestions for combining different approaches

Abstract.  Various alternative approaches are available in the literature for modelling trip distribution. The objective of this paper is to provide a review of this literature with the view of summarising the general nature of the current state of practise and what is now available for practical modelling work. Both aggregate and disaggregate destination choice models are considered, a classification of them will be proposed and suggestions for further research will be given as well. One outcome of this review is that significant contributions are emerging from mixed models (e.g., gravity-opportunity, random utility, intervening opportunities models, etc). In particular, the review will highlight the benefit of integrating different approaches like the introduction of intervening opportunities factors within random utility models.