Influences of land use/cover on water quality in the upper and middle reaches of River Njoro, Kenya

Data from 10 sampling sites along the River Njoro are used to examine the contribution of nutrients from upstream land uses draining each of the sampling sites. The data also are used to assess whether both the proportion of land uses and the size of the subwatersheds account for the variability in water quality in the River Njoro watershed. Geographical Information System analysis was used to determine the spatial distribution of land‐cover types and subwatersheds contributing run‐off to the sampling sites in the River Njoro. Standard Digital Elevation Model‐based routines were used to establish the watershed area contributing run‐off to each sampling site. Water and sediment samples were collected for chemical analysis, and the nutrient levels were related to the upstream land‐use types and the size of the subwatersheds. The mid‐stream portion of the River Njoro (near Egerton University) accounts for the highest nutrient contributions. The percentage contribution is magnified by additions from industrial, human settlements and agricultural land uses around the University. There is a significant decrease in nutrient levels downstream, however, indicating natural purification as the river flows through an area of large‐scale farming with intense, well‐preserved riparian and in‐stream vegetation. Steep slopes of the land upstream of Egerton University enhance erosion and nutrient losses from those subwatersheds. Mixed small‐scale agricultural and bare lands contribute over 55% of the phosphorus load to the upper and mid‐reaches of the River Njoro. The size of the subwatershed accounts for about 53% of the variability in the soluble phosphorus in the river. The land‐use subwatershed proportions are important for characterizing and modelling water quality in the River Njoro watershed. Upland land uses are as important as near‐stream land uses. We suggest that conservation of intact riparian corridor along the river and its tributaries contributes significantly to natural purification processes and recovery of the ecological integrity of the River Njoro ecosystem.     

XML data update management in XML-enabled database

With the increasing demand for a proper and efficient XML data storage, XML-Enabled Database (XEnDB) has emerged as one of the popular solutions. It claims to combine the pros and limit the cons of the traditional Database Management Systems (DBMS) and Native XML Database (NXD). In this paper, we focus on XML data update management in XEnDB. Our aim is to preserve the conceptual semantic constraints and to avoid inconsistencies in XML data during update operations. In this current era when XML data interchange mostly occurs in a commercial setting, it is highly critical that data exchanged be correct at all times, and hence data integrity in XML data is paramount. To achieve our goal, we firstly classify different constraints in XML documents. Secondly, we transform these constraints into XML Schema with embedded SQL annotations. Thirdly, we propose a generic update methodology that utilizes the proposed schema. We then implement the method in one of the current XEnDB products. Since XEnDB has a Relational Model as the underlying data model, our update method uses the SQL/XML as a standard language. Finally, we also analyze the processing performance.     

Still No Evidence for Perfect Timesharing With Two Ideomotor-Compatible Tasks: A Reply to Greenwald (2003).

For 30 years, A. G. Greenwald and H. G. Shulman's (1973) psychological refractory period (PRP) study has been cited as evidence for perfect timesharing with ideomotor (IM)-compatible tasks. Recently, M.-C. Lien, R. W. Proctor, and P. A. Allen (2002) failed to replicate these results and concluded that IM compatibility is neither necessary nor sufficient to eliminate the PRP effect. A. G. Greenwald (2003) attributed Lien et al.'s nonreplication to the use of (a) a non-IM-compatible task, (b) varied trial spacing, and/or (c) inappropriate instructions. The authors of the present article argue that the first 2 factors are not critical and that instructions merely affect the criterion for speed versus accuracy. In each of Greenwald's experiments, dual-task costs were evident on response time or error rates. Furthermore, the small dual-task costs in his study are consistent with a bottleneck model. Thus, Greenwald (2003) does not provide evidence that IM-compatible tasks enable perfect timesharing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Sorption of Acid Green 25 on chitosan: Influence of experimental parameters on uptake kinetics and sorption isotherms

Acid Green 25, which is a diazoic dye bearing two sulfonic groups, is efficiently sorbed on chitosan. The protonation of chitosan may explain the electrostatic attraction of this anionic dye and that its optimum pH is close to 3. Preliminary protonation of amine groups (obtained by contact with a sulfuric acid solution) reduced the variation of solution pH following sorbent addition but significantly reduced sorption performance: the maximum sorption capacity of raw chitosan, 525 mg dye/g (0.84 mmol dye/g), was halved by acidic preconditioning. The acidic conditioning also reduced the kinetic rate—the time necessary to reach equilibrium increased up to threefold depending on the experimental conditions. The size of sorbent particles influenced sorption kinetics and equilibrium because of resistance to intraparticle diffusion, but the sorption appeared to occur not only at the surface of the sorbent but also in the intraparticle network of the polymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1073–1080, 2003     

Dislocations in strained layers: The Ge-Si system

The Ge-Si on Si epilayer system, besides being an interesting technological system in its own right, is a superb model for strained-layer studies. The point defect and symmetry defect structures associated with compound semiconductors can be avoided, allowing a focus on the mechanics of the system. Dislocation sources, glide behavior, and performance effects have been examined for strained-layer systems. Surprises have appeared along the way, but these materials are now becoming characterized well enough for industrial device applications.     

Characterization of solid state array cameras for the mid-IR

We present a characterization of some processes affecting the performance of solid state array cameras designed for ground based astronomical imaging in the 8–13μm atmospheric window. Our discussion includes a novel model for electron-hole generationrecombination noise based on the probable pathlength of an electron in a photoconductor. We use the Berkeley mid-IR Array Camera as an example. For this camera, the results show that the total optical system composed of the camera, a 3m telescope, and the atmosphere has an efficiency of about 3%, a 1σ noise equivalent flux density of 25 mJy min^?1/2arcsec^?2 measured over a Δλ/λ=10% band width, and a noise equivalent expressed as the ambient temperature thermal black body noise of 23%.     

Atmospheric Chemistry of 2-Ethyl Acrolein

The atmospheric oxidation of the unsaturated aldehyde 2-ethyl acrolein, CH₂=C(C₂H₅)CHO, has been studied in laboratory experiments involving the reaction of ozone with 2-ethyl acrolein in the dark (with cyclohexane added to scavenge the hydroxyl radical), and the sunlight irradiation of 2-ethyl acrolein with NO in air. The major carbonyl products of the 2-ethyl acrolein reaction with ozone are formaldehyde, acetaldehyde, and the dicarbonyl ethylglyoxal, CH₃CH₂COCHO. Sunlight irradiation of 2-ethyl acrolein and NO led to the formation of three carbonyls (formaldehyde, acetaldehyde, and ethylglyoxal) and three peroxyacyl nitrates, (RC(O)OONO₂), including PAN (R = CH₃), PPN (R = C₂H₅), and the unsaturated compound EPAN (R = CH₂=C(C₂H₅)). Mechanisms are outlined for the reactions of ozone and of the hydroxyl radical with 2-ethyl acrolein. These mechanisms are consistent with the observed carbonyl and peroxyacyl nitrate products. Thermal decomposition, a major atmospheric removal process for peroxyacyl nitrates, has been studied for EPAN. The decomposition rate of EPAN relative to that of PAN is 0.59–0.73 at 292–294 K and 1 atm of air. Atmospheric implications of these results are discussed.     

Activity of NiO in (Ni,Mg)O Solid Solutions

Disagreement exists in the literature concerting the activity of NiO in (Ni,Mg)O solid solutions. Ideal behavior, as well as strong positive deviations and strong negative deviations from ideality, has been reported. In the present study, the activity of NiO was determined by electromotive force measurements using the solid-state cell Pt/Ni-NiO/0.92ZrO₂-0.08Y₂O₃/Ni-(Ni,Mg)O/Pt. The compositions studied had NiO mole fractions of 0.1,0.3,0.5,0.7, and 0.9. In agreement with theoretical expectations, the solid solutions exhibited ideal behavior at 882° and 982°C. Possible reasons for the conflicting results in the literature arc presented.     

Mixing and solid-liquid mass-transfer rates in a creusot-loire uddeholm vessel: A water model case study

The process of mixing and solid-liquid mass transfer in a one-fifth scale water model of a 100-ton Creusot-Loire Uddeholm (CLU) converter was investigated. The modified Froude number was used to relate gas flow rates between the model and its protoype. The influences of gas flow rate between 0.010 and 0.018 m³/s and bath height from 0.50 to 0.70 m on mixing time were examined. The results indicated that mixing time decreased with increasing gas flow rate and increased with increasing bath height. The mixing time results were evaluated in terms of specific energy input and the following correlation was proposed for estimating mixing times in the model CLU converter: T _mix=1.08Q ^−1.05 W ^0.35, where Q (m³/s) is the gas flow rate and W (tons) is the model bath weight. Solid-liquid mass-transfer rates from benzoic acid specimens immersed in the gas-agitated liquid phase were assessed by a weight loss measurement technique. The calculated mass-transfer coefficients were highest at the bath surface reaching a value of 6.40 × 10⁻⁵ m/s in the sprout region. Mass-transfer coefficients and turbulence parameters decreased with depth, reaching minimum values at the bottom of the vessel.