Clinical Significance of Tumor Infiltrating Lymphocytes in Association with Hormone Receptor Expression Patterns in Epithelial Ovarian Cancer

Hormone receptor expression patterns often correlate with infiltration of specific lymphocytes in tumors. Specifically, the presence of specific tumor-infiltrating lymphocytes (TILs) with particular hormone receptor expression is reportedly associated with breast cancer, however, this has not been revealed in epithelial ovarian cancer (EOC). Therefore, we investigated the association between hormone receptor expression and TILs in EOC. Here we found that ERα, AR, and GR expression increased in EOC, while PR was significantly reduced and ERβ expression showed a reduced trend compared to normal epithelium. Cluster analysis indicated poor disease-free survival (DFS) in AR+/GR+/PR+ subgroup (triple dominant group); while the Cox proportional-hazards model highlighted the triple dominant group as an independent prognostic factor for DFS. In addition, significant upregulation of FoxP3+ TILs, PD-1, and PD-L1 was observed in the triple dominant group compared to other groups. NanoString analyses further suggested that tumor necrosis factor (TNF) and/or NF-κB signaling pathways were activated with significant upregulation of RELA, MAP3K5, TNFAIP3, BCL2L1, RIPK1, TRAF2, PARP1, and AKT1 in the triple dominant EOC group. The triple dominant subgroup correlates with poor prognosis in EOC. Moreover, the TNF and/or NF-κB signaling pathways may be responsible for hormone-mediated inhibition of the immune microenvironment.     

Synergistic Flame Retardant Effects of Carbon Nanotube-Based Multilayer Nanocoatings

In an effort to develop highly functionalized flame retardant materials, hybrid nanocoatings are prepared by alternately depositing a positively charged polyaniline (PANi) and negatively charged montmorillonite (MMT) using the layer-by-layer (LbL) assembly technique. Carbon nanotubes (CNTs) are employed in polymer nanocomposites as effective reinforcement, where nanotubes are stabilized in MMT aqueous solution. The 3D structure and high density of CNTs deposited in the PANi/CNTs-MMT multilayers produce thicker and heavier coatings in comparison to the LbL assemblies without CNTs. Vertical and horizontal flame testing show that the incorporation of CNTs improves fire resistance. Additionally, cone calorimetry reveals that stacking two nanomaterials (MMT and CNTs) in a single coating shows a significant reduction in peak heat release rate (up to 51%), total smoke release (up to 47%), and total heat release (up to 37%) for the polyurethane foam. The enhancement of flame retardancy is attributed to a synergistic effect; MMT serves as a physical barrier that retards the diffusion of heat and gas. The addition of CNTs strengthens the thermal stability and high char yield. These results, coupled with the simplicity with which the LbL deposition is applied, present a viable alternative to halogen-free flame retardant nanocoatings to natural and synthetic fibers.     

Spray Coating of 2- and 3-D Solid Substrates Using a Sulfated Polysaccharide for Marine Antifouling Applications

Marine antifouling coating using functional polymers has emerged as an important tool to combat marine fouling. Owing to their natural abundance, polysaccharides represent a more sustainable option than synthetic polymers and carrageenan, a sulfated polysaccharide, is identified as a promising candidate for further research based on its excellent marine antifouling properties. However, existing research has only explored the application of carrageenan-based coatings for 2D objects, using techniques such as spin-coating. Here, a spray-coating method is proposed to apply carrageenan-based coatings to the surfaces of 2- and 3-D objects. The coated surfaces exhibit high stability under various chemical/physical stresses and high resistance to protein adsorption and marine diatom adhesion.     

Morphological Forms of α-Alumina Particles Synthesized in 1,4-Butanediol Solution

Phase-pure, monodispersed, hexagonal plates of single-crystal α-alumina (∼ 2 μm wide and ∼0.5 μm thick) have been prepared via precipitation by treating an aluminum hydrous oxide precursor in 1,4-butanediol at 300°C under autogenous vapor pressure. Present work shows that KOH is the only reagent that precipitates an aluminum hydrous oxide precursor suitable to synthesize α-alumina in 1,4-butanediol solution. In contrast, the use of NaOH or NH₄OH as the precipitating reagent for the precursor material does not yield the alpha phase. The solution pH at which the precursor materials are precipitated is also a critical factor for the formation of α-Al₂O₃. Phase-pure α-alumina powders were also only synthesized from the aluminum hydrous oxide precursors precipitated in the pH range from 10 to 10.5. The results of X-ray diffraction and scanning electron microscopy indicate that longer reaction times promote the phase transformation from the intermediate boehmite phase to α-alumina. The complete transformation from boehmite to α-alumina requires reaction times of about 12 h.     

Effect of the dispersed phase fraction on particle size in blends with high viscosity ratio

It has been reported that for polymer blends with high viscosity ratio (>1), the size of the dispersed particles decreases with increasing volume fraction of the dispersed phase. In order to explain this effect, an equation was derived for the affine deformation of an imaginary plane of the dispersed phase in stratified two‐phase steady, simple, shear flow. The model predicts that for viscosity ratio >1, the deformation rate increases with volume fraction of the dispersed phase, and the shear stress also increases, leading to an increase of the breakup time. Therefore, the total deformation of the dispersed phase, before breakup, increases with increase of volume fraction, resulting in a decrease of the size of the dispersed phase particles. Accordingly, one can expect that in industrial mixers, the particle size of the blends should decrease as the volume fraction increases, if coalescence is suppressed. Experiments were carried out in a Haake batch mixer, using polyethylene/polyamide‐6 blends compatibilized by adding maleic anhydride grafted polyethylene. Particle size decreased up to 20 wt% polyamide‐6, at 100, 150, and 200 RPM, and increased between 20 and 30 wt%. The decrease of the particle size is mainly due to increased deformation of the dispersed phase. The increase of the particle size above 20 wt% is due to coalescence at high fractions.     

An adaptive genetic algorithm for the time dependent inventory routing problem

In this paper we propose an adaptive genetic algorithm that produces good quality solutions to the time dependent inventory routing problem (TDIRP) in which inventory control and time dependent vehicle routing decisions for a set of retailers are made simultaneously over a specific planning horizon. This work is motivated by the effect of dynamic traffic conditions in an urban context and the resulting inventory and transportation costs. We provide a mixed integer programming formulation for TDIRP. Since finding the optimal solutions for TDIRP is a NP-hard problem, an adaptive genetic algorithm is applied. We develop new genetic representation and design suitable crossover and mutation operators for the improvement phase. We use adaptive genetic operator proposed by Yun and Gen (Fuzzy Optim Decis Mak 2(2):161–175, 2003) for the automatic setting of the genetic parameter values. The comparison of results shows the significance of the designed AGA and demonstrates the capability of reaching solutions within 0.5 % of the optimum on sets of test problems.     

Neutralizing capacity of bottom ash from municipal solid waste incineration of different particle size

This study measures the neutralizing capacity of bottom ash from municipal solid waste incineration of different particle sizes. We examine the effect of particle size on the weathering process, a method popularly used for stabilization of heavy metals in incineration of bottom ash. The distribution of particle sizes in municipal solid waste incineration bottom ash is rather broad, ranging from fine powder to as large as 40 mm in diameter. Although considered a by-product highly suitable as a road construction material, the high level of heavy metal leaching is an obstacle to its reuse. Weathering, a method used to reduce heavy metal leaching, is a lengthy process taking over thee months to complete. The chief reaction involved in weathering is carbonation occurring between Ca(OH)2 in bottom ash and CO₂(g) in the atmosphere. During this process, CaCO₃ is produced, causing the pH level to drop from over 12 to about 8.2 and reducing heavy metal leaching. In this paper, we attempt to determine the particle size best suited for reducing the period required for weathering bottom ash by identifying characteristics of different particle sizes that affect heavy metal leaching and neutralization.     

Wet oxidation of wastewater containing hydrocarbons by novel supported Pd catalysts

Pd catalysts supported on TiO₂, ZrO₂, ZSM-5, MCM-41 and activated carbon were used in catalytic wet oxidation of hydrocarbons such as phenol, m-cresol and m-xylene. It was found that the Pd/TiO₂ catalyst was highly effective in the wet oxidation of hydrocarbon. The activities of catalysts with various hydrocarbon species, catalyst support, oxidation state of catalyst performed in a 3-phase slurry reactor show that reaction on Pd surface is more favorable than that in aqueous phase and that the active site is oxidized Pd in catalytic wet air oxidation of hydrocarbons. Based on the experimental results, a plausible reaction mechanism of wet oxidation of hydrocarbons catalyzed over Pd/TiO₂ catalyst was proposed. This catalyst is superior to other oxide catalysts because it suppressed the formation of hardly-degradable organic intermediates and polymer.     

Microstructural Evolution of Gas-Pressure-Sintered Si3N4 with Yb2O3 as a Sintering Aid

Microstructural evolution of gas-pressure-sintered Si₃N₄ with Yb₂O₃ as a sintering aid was observed. Microstructures typical for in situ toughened Si₃N₄, i.e., large elongated grains randomly distributed in a fine matrix, were observed. However, the size of the elongated grains near the surface was much larger than that at the center, resulting in two distinct regions: an inner region and an outer region. The smaller the amount of Yb₂O₃ added, the larger the difference in the size of the elongated grains between the outer and inner regions. The difference between microstructures was diminished when 16 wt% Yb₂O₃ was added. The microstructural change with Yb₂O₃ content was attributed to the evaporation of Yb-containing liquid phase from the surface.     

Time-slide window join over data streams

The join is an important operator in processing data streams. To produce outputs continuously over unbounded data streams, sliding windows are generally used to limit the scope of the join at a certain time. In the existing join algorithms, only a simple type of windows have been considered, which are updated whenever a new data item arrives on any input stream. On the other hand, a more common type of windows have not been addressed yet, whose intervals are updated periodically, i.e., slid by a predefined time interval. In this paper, we consider the time-slide windows in joining multiple data streams. The algorithm for the time-slide window join can vary according to (i) how frequently the join is evaluated and (ii) which structure is used for windowing. Regarding this, possible algorithms are discussed, and experimental results that compare their performances are provided in this paper.