横泉水库旧坝体及黄土台地强夯处理实践

山西省横泉水库在原有遗留工程基础上进行重新建设，以往的4次施工，填兢了长400m、高17m左右的左岸坝体，填土约120万m^3，但坝体填筑质量极差，干客重和渗透系数根本无法满足设计要求。此次重新建设，决定对这部分干客重不迭设计要求且具有湿陷性的左岸旧坝体以及左岸黄土台地进行强夯处理，对坝体进行强夯处理在省内还是首次进行，在国内也比较少见，通过处理，坝体质量达到了设计要求，并且节约了投资，效果明显。     

从印刷技术的发展看印刷业的重新定位

近20年以来的技术革命使印刷业发生了脱胎换骨的变化，曾经被认为是技术含量低、员工文化素质低、劳动密集型的印刷业已今非昔比。世界上最先进的电子技术、激光技术、计算机技术及网络技术在印刷领域广泛地应用与发展，改变了人们对印刷的传统思维和行为。在信息时代的今天。印刷业已经成为信息社会的先行行业。在新的形势下，印刷业的经营既离不开生产又离不开增值服务，全面解决方案的推行使印刷业的外延扩大到了第三产业。     

高峰值功率重频脉冲固体激光器

综述了高峰值功率重频脉冲固体激光器的发展现状，对其中的Ｑ开关、腔倒空、锁模等窄脉冲技术和放大技术进行了分析，展示了高峰值功率重频脉冲固体激光器的发展前景。     

Failure probability evaluation for normally distributed load-strength model with unknown parameters

The failure probability evaluation methods for load-strength interference model are established when both load, L, and strength, S, follow normal distributions, assuming none of the normal distribution parameters are known. Based on Fisher's fiducial analysis, a failure probability evaluation method is obtained for single load application. A numerical integration method is developed to evaluate the failure probability for multiple load applications.     

Accurate estimation of environment parameters from ultrasonic data

This paper describes a robust and accurate ultrasonic sensing system for a mobile robot. The system continuously updates a local map of the environment in which obstacles are represented by straight lines or points in a robot centered coordinate frame. The presented algorithms use a Kalman filter for the reduction of the noise in the ultrasonic data and use a systematical error correction (‘bundle correction’) to reduce the uncertainty in obstacle direction. Experiments are carried out in simulation and with a real mobile robot system. Results show that the accuracy with which line parameters can be estimated is in the order of 1 degree for the orientation and about 2 cm for the position. The effect of the bundle correction is significant and maximal when the robot approaches walls under a small angle.     

Statistical computer-aided design for microwave circuits

A useful methodology for microwave circuit design is presented. A statistical technique known as Design of Experiments is used in conjunction with computer-aided design (CAD) tools to obtain simple mathematical expressions for circuit responses. The response models can then be used to quantify response trade-offs, optimize designs, and minimize circuit variations. The use of this methodology puts the designer's intelligence back into design optimization while making “designing for circuit manufacturability” a more systematic and straightforward process. The method improves the design process, circuit performance, and manufacturability. Two design examples are presented in context to the new design methodology     

淀积条件对GDa—SiNx薄膜电学特性的影响

本文讨论了用辉光放电法制备氮化硅薄膜时衬底温度、射频功率和气体流量比对薄膜的电导率、介电常数和击穿强度的影响。通过优化生长条件，制备了优质非晶氮化硅薄膜，其介电常数为７．５、击穿强度为５．５ＭＶ／ｃｍ、电导率为１０－１３（Ωｃｍ）－１。     

海林市板桥电站橡胶坝工程设计

文章介绍了海林市板桥电站渠首橡胶坝的工程设计、工程布置、运行管理,为梯级电站开发,下一级电站渠首引水型式提供了一个经验.     

透过3GSM看通信业未来发展两大趋势

3GSM大会的规模一年比一年大,此次是我连续第六次参加3GSM大会.仅大会的前3天就有55,000多名参观者,使今年的大会成为最热闹的一届.     

多掺炼新疆渣油的催化裂化工业生产技术

兰州石化公司以加工新疆原油为主，重油收率高，平均在37％左右，所生产的重油主要靠催化裂化装置来加工，多余部分以低附加值重油出厂。随着涩宁兰天然气工程的逐渐建成，低附加值重油出厂将受到严重威胁，因此，催化裂化装置加工重油显得尤为重要。兰州石化公司炼油厂1.2Mt/a重催装置通过采用先进技术进行改造，使重油掺炼比由41.52%提高到52.20%，提高了10.68个百分点，年多加工重油14.95万t，产品收率达到79.20%以上，能够灵活调节产品结构，创造了良好的经济效益。