Influences of artificial pre-stressing on ply stresses and tensile properties of Vinylon fibre-reinforced aluminium laminates (VIRALL)

A simple micromechanical model based primarily upon the rule-of-mixtures is developed which allows prediction of the effects of fibre preload on the ply stresses (i.e., the initial residual stresses of fibre, adhesive and matrix) induced within VIRALL laminates, and the tensile stress-strain curves and mechanical properties of VIRALL laminates. The analysis of the ply stresses of VIRALL laminates indicates that pre-stressing will dramatically influence the ply stresses. The predicted tensile stress-strain curves of VIRALL laminates are in good agreement with the experimental curves and the results show that the stress-strain curves of VIRALL laminates move upwards when the prestress increases. The predicted tensile mechanical properties of VIRALL laminates at room temperature show good agreement with those obtained experimentally; both show that prestress can improve the tensile properties (i.e., elastic limit strength, 0.2% yield strength and failure strength) of VIRALL laminates.     

New chemical structural features of coal. The structure of coal products

The object of this paper is to demonstrate the usefulness of the transalkylation reaction for determining chemical structural features of products derived from coal. For example, the method is applied to derivatized coals, coals modified by thermolysis, and materials physically or chemically separated from coals. Data are presented for the pyridine soluble and insoluble parts of two coals, an O-methylated coal, a Birch reduced coal, a solvent refined coal, and a coke. Similarities and differences in chemical make-up of these materials are discussed.     

SP预应力空心板在居住建筑中的应用和发展

分析现浇板和传统预制板的特点和弱点，提出发展SP板和SP叠合板是住宅实现大开间、灵活隔断的有效途径之一，也是建筑施工实现现代化的重要内容之一。     

Piston-driven laminar flow and heat transfer in a plane channel with a sudden expansion

 This paper presents a numerical study of piston-driven heat transfer and fluid flow in a plane channel containing a sudden expansion. The numerical method employed is based on a control-volume-based finite element method for incompressible flow with a staggered and moving grid and SIMPLER algorithm for pressure-velocity coupling. The numerical results show a good agreement with the experimental data reported in the literature. Results concerning time and space evolution of the thermal and flow fields are presented for different values of the expansion ratio, the initial clearance volume, and the piston velocity. Received: 20 April 2002 / Accepted: 23 January 2003     

市内通信电缆绝缘电阻特殊要求的实现和措施

本文对市内通信电缆的各生产过程进行分析、研究和控制 ,从而提出了解决绝缘电阻特殊要求的方法 ,以及改进的措施。     

Non-parametric empirical Bayes procedure

In this paper we introduce an empirical Bayes procedure for estimating an unknown parameter, say θ. This procedure gives the empirical Bayes estimator for θ and its associated minimum posterior risk in closed forms without estimating the unknown prior density function of θ. In such procedure the posterior probability density function of θ is not required. A sufficient statistic for θ with conditional probability density function in the one parameter exponential family is required. Instead of estimating the unknown prior density function, the marginal density function of the sufficient statistic must be estimated. As special cases the empirical Bayes estimators and their respective minimum posterior risks of the failure rate for the exponential distribution, the unknown scale parameters of Weibull and gamma distributions are obtained in simple forms as special cases. Numerical results and a simulation study are introduced to (i) investigate how the number of available past experiments and the sample size of each influence the accuracy of the empirical Bayes estimator, (ii) make a comparison between the presented procedure and the Bayes procedure when the prior probability density function of the parameter θ is gamma.     

TiO2纳米薄膜的微结构控制

通过有机酸修饰的水基so1-gel法，分别制备了由层状、针形和球形纳米粒子构成的纳米二氧化钛薄膜，采用SEM、XRD、红外光谱进行了表征.研究发现，调节水解过程中钛酸四丁酯：醋酸的摩尔比，可以控制薄膜的微结构，并对其机理进行了分析.该方法可以应用于sol-gel法制备其他纳米薄膜过程中的材料微结构控制.     

Effects of the cryogenic cooling on the fatigue strength of the AISI 304 stainless steel ground components

For environmental considerations, the substitution of the conventionally used oil-based grinding fluids has nowadays become strongly recommended. Although several alternatives have been proposed, cryogenic cooling by liquid nitrogen is the non-polluting coolant that has been given relatively more attention because of its very low temperature. In this investigation, in order to contribute to developing this promising cooling mode, its beneficial effects on the ground surface integrity of the AISI 304 stainless steel and their consequences on the fatigue lifetime are explored. Results of this investigation show that grinding under cryogenic cooling mode generates surfaces with lower roughness, less defects, higher work hardening and less tensile residual stresses than those obtained on surfaces ground under oil-based grinding fluid. These surface enhancements result into substantial improvements in the fatigue behaviour of components ground under this cooling mode. An increasing rate of almost 15% of the endurance limit at 2 × 10⁶ cycles could be realized. SEM analyses of the fatigue fracture surfaces have shown that the fatigue cracks observed on the specimens ground under cryogenic cooling are shorter (i.e., 30-50 μm) than those generated under oil-based cooling mode (i.e., 150-200 μm). The realized improvements in the surface integrity and in the fatigue behaviour are thought to be related to the reduction of the grinding zone temperature observed under cryogenic cooling, as no significant differences between the grinding force components for both cooling modes have been observed.