Palynological investigation of some selected species of family Fabaceae from Pakistan,using light and scanning electron microscopy techniques

Pollen morphology of 11 species of family Fabaceae that is, Trifolium alexandrinum, Trifolium resupinatum, Arachis hypogaea, Lathyrus aphaca, Medicago lupulina, Vicia sativa, Lathyrus odoratus, Pongamia pinnata, Melilotus indicus, Medicago polymorpha, Medicago sativa from Pakistan has been investigated by light and scanning electron microscopy. Pollen were generally tricolporate, radially symmetrical, isopolar, elliptic in equatorial view and triangular in polar view under LM. Results showed that pollens were per‐prolate (T. alexandrinum), prolate (T. resupinatum, V. sativa, L. odoratus, Melilotus indicus, M. polymorpha, M. sativa) and sub‐prolate (A. hypogaea, L. aphaca, M. lupulina, P. pinnata). The larger polar/equatorial (P/E) ratio was found in T. alexandrinum (2.26 μm) and the smallest was found in M. lupulina (1.21 μm). The exine of T. resupinatum was 3.00 μm in thickness while others posses smaller exine thickness. The larger pore diameter was found in P. pinnata (16.01 μm) while others have smaller. The length of colpi was larger in Arachis hypogaea (32.24) while others posses smaller. Eight types of surface ornamentation (Psilate, faintly rugulate). Perforate and rugulate to verrucate have been observed under SEM. The pollens were europalynous type. Pollen morphology proved to be useful for the specific delimitation and serve as a tool for the identification and classification of taxa at specific and generic levels and can also be used as a key for the taxonomic features. Diversity in exine sculpture is helpful indicative characters for the isolation of closely related species. Hence, it is clear that both qualitative and quantitative characters of pollen can be useful for differentiating between taxa at specific level.     

A GIS-based DRASTIC model for assessing aquifer vulnerability in Kakamigahara Heights, Gifu Prefecture, central Japan

Vulnerability assessment to delineate areas that are more susceptible to contamination from anthropogenic sources has become an important element for sensible resource management and land use planning. This contribution aims at estimating aquifer vulnerability by applying the DRASTIC model as well as utilizing sensitivity analyses to evaluate the relative importance of the model parameters for aquifer vulnerability in Kakamigahara Heights, Gifu Prefecture central Japan. An additional objective is to demonstrate the combined use of the DRASTIC and geographical information system (GIS) as an effective method for groundwater pollution risk assessment. The DRASTIC model uses seven environmental parameters (Depth to water, net Recharge, Aquifer media, Soil media, Topography, Impact of vadose zone, and hydraulic Conductivity) to characterize the hydrogeological setting and evaluate aquifer vulnerability. The western part of the Kakamigahara aquifer was dominated by "High" vulnerability classes while the eastern part was characterized by "Moderate" vulnerability classes. The elevated north-eastern part of the study area displayed "Low" aquifer vulnerability. The integrated vulnerability map shows the high risk imposed on the eastern part of the Kakamigahara aquifer due to the high pollution potential of intensive vegetable cultivation. The more vulnerable western part of the aquifer is, however, under a lower contamination risk. In Kakamigahara Heights, land use seems to be a better predictor of groundwater contamination by nitrate. Net recharge parameter inflicted the largest impact on the intrinsic vulnerability of the aquifer followed by soil media, topography, vadose zone media, and hydraulic conductivity. Sensitivity analyses indicated that the removal of net recharge, soil media and topography causes large variation in vulnerability index. Moreover, net recharge and hydraulic conductivity were found to be more effective in assessing aquifer vulnerability than assumed by the DRASTIC model. The GIS technique has provided efficient environment for analyses and high capabilities of handling large spatial data.     

Studies on mechanical and biodegradability properties of PVA/lignin blend films

The mechanical and biodegradation properties of polyvinyl alcohol/lignin blended films have been studied. The biodegradable composite films were developed by mechanical mixing followed by film casting method using poly (vinyl alcohol) (PVA), with lignin in different compositions. The progress of biodegradation was evidenced by means of the soil burial test. There was also an evaluation of the weight loss of the samples at the end of the biodegradation process. Blending the PVA with lignin improves tensile strength and the modulus of elasticity and causes a slight decrease in the elongation at break. The best tensile mechanical properties of a PVA/lignin blend were at ratio 2:30 where the tensile strength was 38 MPa, elastic modulus 83.22 MPa and elongation at break 213.9%. Blends of various PVA/lignin ratios have shown transparency, flexibility and good mechanical properties. Film composites also showed good biodegradability. The addition of lignin to the PVA matrix increases the degradation rate of the blends. The weight loss is affected by the composition of the blend, and by the nature of the microorganisms in the soil. PVA/lignin film may be potentially suitable as eco-friendly packaging materials.     

Proposal of an equivalent linearization method to predict seismic hysteretic energy demand considering stiffness degradation effects

To overcome complexities and shortcomings of previous studies, a new method is proposed to derive an equivalent linear model for predicting seismic hysteretic energy demand of bilinear single degree of freedom (SDOF) models. A new displacement spectrum is defined, which represents hysteretic energy. It is found that by increasing initial period and damping of a nonlinear system in the correct proportion and defining a linear model with these characteristics, the new developed displacement can be achieved. Error minimization is applied through an algorithm to find the optimum equivalent period corresponding to an equivalent damping utilizing two sets of far‐field and near‐field earthquakes. To analyze the effects of stiffness degradation, the proposed algorithm has been implemented on modified Clough hysteretic model as well. Comparing the results, effects of stiffness degradation on the ratio of equivalent to initial period is evident in the short period range, while with increasing initial period, the effect can almost be neglected at higher values of ductility. Nonlinear regression analysis is carried out to provide the equations for predicting equivalent linear parameters as a function of ductility. Despite the previous predictive equations, the proposed model is independent of earthquake characteristics and response‐related parameters, which has increased efficiency as well as simplicity.     

大塑性变形技术制备块状超细晶TiNi基形状记忆合金研究进展

详细介绍了块状超细晶TiNi基形状记忆合金的研究进展,包括其制备工艺与显微组织、马氏体相变行为、力学性能和形状记忆特性以及超弹性性能,并介绍了其在医学和工程领域的实际应用,最后探讨了块状超细晶TiNi基形状记忆合金今后的研究发展方向。     

Protection of titanium metal by nanohydroxyapatite coating with zirconia and alumina second phases

In this study hydroxyapatite (HA)/zirconia/alumina composite coatings on titanium metal was carried out using Sol-Gel dip coating and calcination process. Hydroxyapatite-Alumina-Zirconia sol, coated samples in three processes by changing final sol stirring time, aging time, calcination temperature of synthesized powder and prepared coating and rate of coating. Some parts of prepared sol were also synthesized and became powder in all three processes. Scanning electron microscopy was used to estimate the particle size of the surface and for morphological analysis. The functional group and crystallization characteristics of the powders were analyzed using (FTIR) and X-Ray diffraction (XRD). Results show that the morphology of HA-Alumina-Zirconia coatings is more homogenous in the second process with 2 hours final sol stirring time, 20 hours aging time under stirring at 60, 675°C calcination temperature for coating and 850°C for powder and 60mm/min rate of dip coating.     

中间层成分对GTD-111/IN-718高温合金在瞬时液相连接过程中显微组织和力学性能的影响

研究使用不同的中间层瞬时液相连接两种异种高温合金的适用性.在1100℃、不同时间下瞬时液相连接GTD-111/IN-718体系,研究BNi-2、BNi-3和BNi-9三种类型的中间层对该体系显微组织和力学性能的影响.采用场发射扫描电子显微镜和能量色散光谱技术,研究接头区域的成分变化和显微组织.结果表明,非热凝固区Ni3...     

The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact

Laser surface texturing (LST) is an emerging effective method for improving the tribological performance of friction units lubricated with oil. In LST technology, a pulsating laser beam is used to create thousands of arranged microdimples on a surface by a material ablation process. These dimples generate hydrodynamic pressure between oil-lubricated parallel sliding surfaces. The impact of LST on lubricating-regime transitions was investigated in this study. Tribological experiments were conducted with a pin-on-disk apparatus at sliding speeds in the range of 0.015–0.75 m/s and nominal contact pressures that ranged from 0.16 to 1.6 MPa. Two oils with different viscosities (54.8 and 124.7 cSt at 40 °C) were used as lubricants. The test results showed that laser texturing expanded the contact parameters in terms of load and speed for hydrodynamic lubrication, as indicated by friction transitions on the Stribeck curve. The beneficial effects of laser surface texturing are more pronounced at higher speeds and loads and with higher viscosity oil.     

Sectored Compact Space Reactor (SCoRe) concepts with a supplementary lunar regolith reflector

Design concepts of the Sectored Compact Space Reactor for Small power (SCoRe-S) have been developed for the avoidance of single-point failures in reactor cooling and energy conversion and a wide range of thermal powers. These modular, fast neutron spectrum, lithium cooled reactors with 16.0 cm thick BeO radial reflector are designed for at least +$2.00 hot-clean excess reactivity, and with a sufficient reactivity shutdown margin. They employ ¹⁵⁷GdN additives in the UN fuel and a 0.10 mm thick coating of ¹⁵⁷Gd₂O₃ on the outer surface of the reactor vessel to ensure that the bare reactors, when submerged in wet sand and flooded with seawater following a launch abort accident, remain at least ?$1.00 subcritical. In addition to identifying the smallest SCoRe-S concept that satisfies the design reactivity requirements, the benefit of using a lunar regolith as a supplementary reflector to decrease the thickness of the BeO radial reflector and hence, the launch mass of the SCoRe-S concepts for a lunar outpost is investigated. Calculations performed using MCNP5 confirmed that SCoRe-S₇ with a 16 cm thick BeO reflector is the smallest to satisfy the stated reactivity requirements. Results also show that a lunar regolith reflector alone is inadequate for this reactor to achieve a critical state at the beginning of life. However, when the regolith is used in conjunction with a BeO reflector of a reduced thickness, this reactor not only becomes critical, but also satisfies the reactivity design requirements at a significantly reduced launch mass. Using a supplementary reflector of regolith decreases the thickness of the BeO reflector for the SCoRe-S₇ from 16 cm to 8.0 cm, and to 5.7 cm for the SCoRe-S₁₁ of the largest core. The resulting decreases in the launch mass of the SCoRe-S concepts are ～34% or 150–200 kg.     

Methods for determining operation life and reactivity depletion for space reactors with fast energy spectra

Space reactors with fast neutron energy spectrums are preferred for their compactness and high fission power density, but require a high fissile inventory. The operation life estimates of these reactors are important to mission planning. This paper examines a number of fuel depletion and neutronics code packages for determining the operation lives of two space reactors with hard fast neutron energy spectra. These are: the lithium-cooled, Sectored, Compact Reactor (SCoRe-S₁₁), and the submersion subcritical safe space (S^4) reactor, cooled with a He–Xe binary gas mixture (40 g/mol). This work investigated the code packages of Monteburns 2.0, MCNPX 2.6C and TRITON and validated their prediction with fuel depletion data for a PWR fuel bundle, with satisfactory results. The operation life predictions of the two space reactors using these code packages are compared with those calculated using a simplified method that couples MCNP5 to a burnup analysis model using the Simulink^® platform. This method considers only the 10 most probable low-Z and high-Z elements of the fission yield peaks plus ¹⁴⁹Sm, and neglects the depletion of fission products due to capture and radioactive decay. The simplified method requires significantly shorter running time and its predictions of the operation lives for the two space reactors are within 0.29–12.5% of those obtained using Monteburns 2.0 and MCNPX 2.6C code packages. This method, however, is not recommended for operation life predictions for space or commercial reactors with thermal neutron spectrums.