Effects of an MPL on water and thermal management in a PEMFC

In this study, the effects of adding a microporous layer (MPL) as well as the impact of its physical properties on polymer electrolyte fuel cell (PEMFC) performance with serpentine flow channels were investigated. In addition, numerical simulations were performed to reveal the effect of relative humidity and operating temperature. It is indicated that adding an extra between the gas diffusion layer (GDL) and catalyst layer (CL), a discontinuity in the liquid saturation shows up at their interface because of differences in the wetting properties of the layers. In addition, results show that a higher MPL porosity causes the liquid water saturation to decrease and the cell performance is improved. A larger MPL thickness reduces the cell performance. The effects of MPL on temperature distribution and thermal transport of the membrane prove that the MPL in addition to being a water management layer also improves the thermal management of the PEMFC.     

Preparation and improvement of the mesoporous nanostructured nickel catalysts supported on magnesium aluminate for syngas production by glycerol dry reforming

Dry reforming of glycerol is an interesting method for syngas production due to its H₂/CO ≈ 1 that is suitable for FT synthesis. In this study, the performance of the Ni/MgO.Al₂O₃ catalysts with different nickel contents was investigated in glycerol dry reforming. The MgO.Al₂O₃ carrier was prepared by a simple sol-gel method and the nickel-based catalysts were synthesized by the wet impregnation method. The prepared catalysts possessed high BET surface area and pore volume. The TPR analysis showed a strong interaction between Ni and the catalyst support. The results demonstrated that the glycerol conversion decreased by increasing in CO₂/glycerol (GRR) molar ratio. All the prepared samples showed high stability in glycerol dry reforming during 25 h of reaction, indicating the high resistance of the catalysts against carbon formation. Also, 10 wt%Ni/MgO.Al₂O₃ catalysts possessed the highest catalytic performance (52% of glycerol conversion at 750 °C) due to the high dispersion of nickel on the prepared carrier.     

Autothermal reforming of methane over Ni catalysts supported on nanocrystalline MgO with high surface area and plated-like shape

Autothermal reforming of methane (ATRM), combination of partial oxidation and steam reforming was performed over MgO supported Ni catalysts. The preparation of MgO via surfactant-assisted precipitation method led to obtain a nanocrystalline carrier for nickel catalysts. The results demonstrated that methane conversion is significantly increased with increasing the Ni content (5, 7, 10 and 15%Ni) and methane conversion of 15%Ni/MgO was higher than that of other catalysts with lower Ni loading in all operation temperatures.In addition, increasing the system operation temperatures led to decrease in H₂/CO due to the fact that water-gas shift reaction was thermodynamically unfavorable at elevated temperatures. This catalyst also exhibited stable catalytic performance during 50 h time on stream. Furthermore, the influences of varying GHSV and feed ratio on activity of 15%Ni/MgO catalyst were investigated.     

Nanocrystalline MgO supported nickel-based bimetallic catalysts for carbon dioxide reforming of methane

Nanocrystalline magnesium oxide with high surface area and plate-like shape was employed as catalyst support for preparation of nickel-based bimetallic catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by X-ray diffraction (XRD), N₂ adsorption (BET), Temperature programmed oxidation and desorption (TPO–TPD), Thermal gravimetric and differential thermal gravimetric (TGA–DTG), H₂ chemisorption and Transmission and electron microscopies (TEM and SEM) analyses. CO₂–TPD data showed the high CO₂ adsorption capacity of catalysts which improves the resistance of catalysts against the carbon formation. The H₂ chemisorption results also indicated that the addition of Pt to nickel catalyst improved the nickel dispersion. The obtained results revealed that the prepared catalysts showed a high activity and stability during the reaction with a low amount of deposited carbon. Addition of Pt to nickel catalyst improved both the activity and resistivity against carbon formation.     

Promotional effect of Mg in trimetallic nickel-manganese-magnesium nanocrystalline catalysts in CO2 reforming of methane

In the present paper, the dry reforming reaction was studied over the 10 wt%Ni-3wt.%Mn-x wt.% Mg (x = 2, 4 and 6 wt%) catalysts supported on γ-Al₂O₃ with mesoporous structure. The physicochemical characteristics of the samples were determined by XRD, BET, TPO, and SEM techniques. Mesoporous γ-Al₂O₃ carrier with the high BET area (186 m²/g) was synthesized by a simple sol–gel method and the Ni, NiMn and Mg promoted catalysts possessed nanocrystalline mesoporous structure with the BET area in the range of 127–176 m²/g. The average pore radius of the prepared catalysts were smaller than 11 nm. All the synthesized samples exhibited a CH₄ conversion in the range of 60–65% at 700 °C. The small differences in methane conversion in all catalysts could be related to the same nickel loading. According to the TPR results, the Mg addition caused an increase in the reducibility of the nickel catalyst and the Mg-promoted sample exhibited a higher conversion compared to the monometallic catalyst, due to its higher reducibility. The results showed that the textural characteristics of the catalysts were affected by the content of Mg. The results indicated that the NiMn/Al₂O₃ catalyst promoted by 4 wt% Mg showed the highest CH₄ conversion in all studied reaction temperatures (550–700 °C). Furthermore, only one oxidation peak was detected for all catalysts in TPO analysis, which was related to the filamentous form carbon. The 10Ni/Al₂O₃ and 10Ni3Mn4Mg/Al₂O₃ catalysts exhibited the highest and the lowest amount of deposited filamentous carbon, respectively. The 10Ni3Mn4Mg/Al₂O₃ catalyst was stable during the 20 h time on stream without any decline in CH₄ conversion.     

Effects of Soy and Corn Flour Addition on Batter Rheology and Quality of Deep Fat-Fried Shrimp Nuggets

In this paper, the effects of soy and corn flour (5 and 10% w/w) addition to the batter formulation on the quality of deep fat-fried shrimp nuggets were evaluated. Rheological properties of batters, coating pick-up, moisture content, and oil content of the samples were determined. Shrimp nuggets were fried at 150 °C, 170 °C, 190 °C, for 1, 2, 3, 4, and 5 min. The coating pick-up, oil and moisture content were found to be directly proportional to batter viscosity. All batters were found to show shear thinning behavior by exhibiting flow behavior index ≤ 1. The batters were modeled as power law fluids. Batter formulation, frying time, and temperature significantly (p < 0.01) affected moisture and oil content of shrimp nuggets. Soy flour added batters provided the highest consistency index, 7.595 and 10.635 Pa.sⁿ for 5% and 10% soy flour added, respectively. Soy flour was found to be an effective ingredient in decreasing oil content of fried nuggets. Batters containing 5% corn flour showed the lowest moisture content and the highest oil content among all the formulations. The mean moisture and fat content of shrimp nuggets coated with batter contained 10% soy and 5% corn flour, fried at 190 °C, for 5 min were 0.59 ± 0.022, 0.480 ± 0.029 and 0.149 ± 0.035, 0.346 ± 0.024 (g/g db), respectively.     

Synthesis of lysozyme imprinted column with macroporous structure and enhanced selectivity: Utilization of cryogelation technique and electrostatic functional monomers

Applicability of molecularly imprinted polymers (MIP) in conventional protein separation processes demands monolithic construction of columns with macroporous structure in addition to the high specificity and adsorption capacity. In this study, therefore, lysozyme (Lyz) imprinted monolithic cryogel columns were synthesized using electrostatic functional monomers (EFMs) to provide strong interactions between template and polymer, leading to specific recognition and capture of Lyz. SEM images and FTIR spectroscopy analysis confirmed the macroporous structure and presence of EFMs in the samples. Adsorption isotherms, heterogeneity, and breakthrough curves as well as selectivity of the molecularly imprinted cryogels (EFMs‐MIC) and non‐imprinted cryogels (EFMs‐NIC) were investigated. Results showed effective imprinting with a maximum adsorption capacity of 211 mg/g and a high imprinting factor (IF) of 4.2 at low Lyz concentrations. A high relative selectivity coefficient of 7.24 was obtained for Lyz over cytochrome c, a competing protein, indicating that the imprinted sites could well distinguish Lyz. Reusability of MICs was also examined, where insignificant changes were observed in the cryogel adsorption/desorption characteristics after four cycles. Therefore, it is suggested to use EFMs and cryogelation in the synthesis of imprinted monolithic cryogels column for application in conventional protein separation processes. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42880.