Java multimedia telecollaboration

Using Java-based tools in multimedia collaborative environments accessed over the Internet can increase an application's client base. Most operating systems support Java, and its "compile once-run everywhere" architecture is easy to maintain and update. The Java-based tools presented here let users share Internet resources, including resources originally designed for single use.     

A New Hand-Held Microsystem Architecture for Biological Analysis

This paper presents a hand-held microsystem based on new fully integrated magnetoresistive biochips for biomolecular recognition (DNA hybridization, antibody antigen interaction, etc.). Magnetoresistive chip surfaces are chemically treated, enabling the immobilization of probe biomolecules such as DNA or antibodies. Fluid handling is also integrated in the biochip. The proposed microsystem not only integrates the biochip, which is an array of 16times16 magnetoresistive sensors, but it also provides all the electronic circuitry for addressing and reading out each transducer. The proposed architecture and circuits were specifically designed for achieving a compact, programmable and portable microsystem. The microsystem also integrates a hand-held analyzer connected through a wireless channel. A prototype of the system was already developed and detection of magnetic nanoparticles was obtained. This indicates that the system may be used for magnetic label based bioassays     

Analysis of an extensive measurement program developed from the start up to the follow up of the operation of the CNAAA NPP

Integrated tests (IT) applied to the Units I and II of the CNAAA Nuclear Power Plants (Angra dos Reis, Rio de Janeiro, Brazil) vara part of a comprehensive test program required to have the commercial operational licence issued. The IT cover operation at zero power and the subsequent power levels (the power escalation) until the nominal power operation.

This paper reports and compares the results of systematic neutron and gamma equivalent dose-rate measurements performed inside and outside the reactor containment of each Unit, during the start-up phase of the operation, for different power levels of the reactors. It also compares the collective-doses measured along the operation of the two units of the CNAAA wich similar data of the Grafenrheinfeld nuclear power plant (Germany) — basic-of-project for the CNAAA — Unit II — and analyses the data under the fight of the state-of-art.     

The influence of oxygen partial pressure on growth of the (Hg,Re)-1223 intergrain junction

Hg/sub 0.82/Re/sub 0.18/Ba/sub 2/Ca/sub 2/Cu/sub 3/O/sub 8+/spl delta// polycrystalline samples were successfully obtained by using different oxygen partial pressure in the annealing treatment of the precursor ceramic. The doping state was confirmed by X-ray powder diffraction pattern analysis and by observing distinct thermopower values at room temperature. Also, the intergrain regions have shown an improvement in the critical current density when using the precursor preparation with 10% O/sub 2/ and 90% Ar (optimal doped). The optimal doped sample has presented the highest /spl alpha/ exponent of the J/sub c//spl prop/[1-(T/T/sub c/)/sup 2/]/sup /spl alpha// dependence. For the case of (Hg,Re)-1223 polycrystalline superconductor applications, the /spl alpha/ exponent can be used as a junction quality parameter.     

Solutions to a combined problem of excessive hydrogen sulfide in biogas and struvite scaling.

The Woodman Point Wastewater Treatment Plant (WWTP) in Western Australia has experienced two separate problems causing avoidable maintenance costs: the build-up of massive struvite (MgNH4PO4. 6H2O) scaling downstream of the anaerobic digester and the formation of hydrogen sulfide (H2S) levels in the digester gas to levels that compromised gas engine operation and caused high operating costs on the gas scrubber. As both problems hang together with a chemical imbalance in the anaerobic digester, we decided to investigate whether both problems could be (feasibly and economically) addressed by a common solution (such as dosing of iron solutions to precipitate both sulfide and phosphate), or by using separate approaches. Laboratory results showed that, the hydrogen sulfide emission in digesters could be effectively and economically controlled by the addition of iron dosing. Slightly higher than the theoretical value of 1.5 mol of FeCl3 was required to precipitate 1 mol of dissolved sulfide inside the digester. Due to the high concentration of PO4(3-) in the digested sludge liquor, significantly higher iron is required for struvite precipitation. Iron dosing did not appear an economic solution for struvite control via iron phosphate formation. By taking advantage of the natural tendency of struvite formation in the digester liquid, it is possible to reduce the risk of struvite precipitation in and around the sludge-dewatering centrifuge by increasing the pH to precipitate struvite out before passing through the centrifuge. However, as the Mg2+/PO4(3-) molar ratio in digested sludge was low, by increasing the pH alone (using NaOH) the precipitation of PO4(3-) was limited by the amount of cations (Ca2+ and Mg2+) available in the sludge. Although this would reduce struvite precipitation in the centrifuge, it could not significantly reduce PO4(3-) recycling back to the plant. For long-term operation, maximum PO4(3-) reduction should be the ultimate aim to minimise PO4(3-) accumulation in the plant. Magnesium hydroxide liquid (MHL) was found to be the most cost-effective chemical to achieve this goal. It enhanced struvite precipitation from both, digested sludge and centrate to the point where more than 95% PO4(3-) reduction in the digested sludge was achieved.     

PdO/Pd system equilibrium phase diagram under a gas mixture of oxygen and nitrogen

The thermal equilibrium decomposition properties of the PdO-Pd system under oxygen partial pressures ranging from 0.1 to 1.0 atm in a total combined pressure of oxygen and nitrogen of 1.0 atm were investigated by means of thermal-gravimetric analyses. The phase diagram of Pd-PdO over the range of oxygen/nitrogen gas concentration was established. The decomposition temperature of PdO to Pd was found to increase with the partial pressure of oxygen.     

A high-linearity 100-element diode grid mixer

Grid-mixer arrays can achieve high linearity and dynamic range through quasi-optical power combining. We present a 100-element single-ended diode grid mixer operating at 2.45 GHz. Each element incorporates two diodes in series. We measure an input third-order intercept of 11 W (40.5 dBm), and output third-order intercept of 3.4 W (35.4 dBm), and an associated conversion loss of 5.1 dB. The power-handling capability of the array is 100 times larger than that of a microstrip mixer using a single element. The local oscillator (LO) drive requirement for the entire array is 1.4 W (31.6 dBm). The angular dependence of the array's IF power is also presented and is in agreement with theory     

Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

From visual data exploration to visual data mining: a survey

We survey work on the different uses of graphical mapping and interaction techniques for visual data mining of large data sets represented as table data. Basic terminology related to data mining, data sets, and visualization is introduced. Previous work on information visualization is reviewed in light of different categorizations of techniques and systems. The role of interaction techniques is discussed, in addition to work addressing the question of selecting and evaluating visualization techniques. We review some representative work on the use of information visualization techniques in the context of mining data. This includes both visual data exploration and visually expressing the outcome of specific mining algorithms. We also review recent innovative approaches that attempt to integrate visualization into the DM/KDD process, using it to enhance user interaction and comprehension.     

A shell for cooperating expert systems

Abstract: This paper describes a shell for cooperating expert systems that has been developed at the University of Porto. The main goal of this shell is two-fold: to generate a community of cooperative knowledge-based systems and to develop several special reasoning techniques which can be used under a distributed and cooperative paradigm. UPShell is able to convert a set of generated intelligent systems (ISs) into a community of cooperative ISs. In this first version it is already possible to generate different intelligent systems which are able to run 'simultaneously' as separate Unix processes and, using a message-passing mechanism, to communicate among themselves. They can be set to pursue an overall goal in a cooperative way. Moreover, several tasks can be given to each IS to be solved simultaneously, and the IS can switch from task to task according to dynamic priorities reflecting the urgency attached to the specific sub-tasks that emerge. The shell described here may also be used to test, within a distributed environment, some time-bounded reasoning techniques that are presently being developed. The paper has three main parts: a general overview of the UPShell (Section 1); a tutorial explaining, by means of examples, how to use the package (Section 2); and, finally, some considerations on the reasoning techniques used and future improvements (Sections 3–5).