The effect of post-weld heat treatment on the mechanical properties of 2024-T4 friction stir-welded joints

In this study, the effect of post-weld heat treatment (PWHT) on the mechanical properties of friction stir-welded 2024 aluminum alloys in the T4 temper state was investigated. Solution heat treatment and various ageing treatments were given to the welded joints. The PWHT procedures caused abnormal coarsening of the grains in the weld zone, which resulted in a drop in micro-hardness at the weld zone compared to the base material of the joints. T6 (190 °C – 10 h) ageing treatment after welding was found to be more beneficial than the other heat treatments in enhancing the mechanical properties of the 2024-T4 joints. However, the T6 (190 °C – 10 h) heat treatment led to significant ductility deterioration in the joint.     

Theoretical cross sections of Bi,Th, U and U on deuteron-induced reactions

There are many application fields for fast neutrons. The main application fields of the fast neutrons are accelerator-driven sub-critical systems (ADS) and fusion–fission (hybrid) reactor systems for fission energy production. Thorium (Th) and uranium (U) are nuclear fuels in fusion–fission (hybrid) reactor systems and bismuth (Bi) is also the target nucleus in the ADS reactor systems. In this study, neutron production cross sections produced by (d, xn) reactions for spallation targets such as ²⁰⁹Bi, ²³²Th, ²³⁵U and ²³⁸U have been investigated. New evaluated hybrid model and geometry dependent hybrid model have been used to calculate the pre-equilibrium neutron production cross sections. For the reaction equilibrium component, Weisskopf–Ewing model calculations have been preferred. The obtained results have been discussed and compared with the available experimental data and found in agreement with each other.     

Triton Emission Spectra in Some Target Nuclei Irradiated by Ultra-Fast Neutrons

High-current proton accelerator technologies make use of spallation neutrons produced in (p,xn) and (n,xn) nuclear reactions on high-Z targets. The produced neutrons are moderated by heavy water. These moderated neutrons are subsequently captured on ³He to produce tritium via the (n,p) reaction. Tritium self-sufficiency must be maintained for a commercial power plant. So, working out the systematics of (n,t) reaction cross sections and triton emission differential data are important for the given reaction taking place on various nuclei at different energies. In this study, triton emission spectra by using ultra-fast neutrons (incident neutron energy >50 MeV), the (n,xt) reactions for some target nuclei as ¹⁶O, ²⁷Al, ⁵⁶Fe, ⁵⁹Co, ²⁰⁸Pb and ²⁰⁹Bi have been investigated. In the calculations, the pre-equilibrium and equilibrium effects have been used. The calculated results have been compared with the experimental data taken from the literature.     

Probing Local Surface Potential of Quasi‐One‐Dimensional Systems: A KPFM Study of P3HT Nanofibers

A new model for the quantitative analysis of Kelvin Probe Force Microscopy (KPFM) measurements of quasi‐one‐dimensional systems is presented. It is applied to precisely determine the local surface potential (SP) of semiconducting nanofibers of poly(3‐hexylthiophene) (P3HT) self‐assembled on various flat substrates. To study these quasi‐one dimensional objects, the effective area has been defined. This parameter represents the area of sample surface interacting with the KPFM probe and it plays a crucial role in the estimation of the SP of nanofibers having a cross‐section comparable to the apical diameter of the tip, i.e., 20 nm. Therefore our model makes it possible to gain quantitative insight into nano‐systems smaller than 20 nm. In particular, through the estimation of the effective area, it allows to determine the local surface potential of single nanofiber as well as to simulate the KPFM image of nano‐assemblies adsorbed both on electrically insulating and conducting substrates. This versatile model represents a useful tool to study with a high degree of precision the surface potential characteristics of nanowires paving the way towards their use as building blocks for the fabrication of electronic nanodevices with improved performance.     

Sliding mode control with integral augmented sliding surface: design and experimental application to an electromechanical system

In this study, an integral augmented sliding mode control (SMC + I) has been proposed to improve control performance of systems. Stability of the closed-loop system is guaranteed in the sense of Lyapunov stability theorem. The effectiveness of the control solution is established by the stability analysis of the closed-loop system dynamics. The proposed controller is adopted to control speed of an electromechanical system. The experimental set-up reflects the emphasis on the practicability of the proposed sliding mode controller. The experimental results are presented and compared with the results obtained from conventional sliding mode control and Proportional + Integral + Derivative (PID) control. The experimental results verify that the proposed controller provides favorable tracking performance, faster and smoother speed regulation with regard to parameter variations and disturbances. The present study shows that the proposed controller, with its straightforward solution, is easily applicable to industrial problems and an alternative to conventional PID and sliding mode controllers.     

Antioxidant potential and phenolic constituents of Salvia cedronella

The acetone extract of the aerial parts of the plant Salvia cedronella Boiss. was screened for its total phenolic content and flavonoid content. The antioxidant potential was evaluated, in vitro, by using three different assays; β-carotene–linoleic acid test system for total antioxidant activity, DPPH for free radical scavenging activity, Fe²⁺–ferrozine test system for metal chelation. A high content of phenolics, potent radical scavenging ability and significant iron chelating effect were observed. However, the inhibition of lipid peroxidation was not significant in β-carotene–linoleic acid test system. A phytochemical analysis yielded a new coumarin, 3-methoxy-4-hydroxymethyl coumarin, together with p-hydroxyphenylethyl docosanoate, and two triterpenoids oleanolic acid and betulinic acid.     

Ozonated Olive Oil with a High Peroxide Value for Topical Applications: In-Vitro Cytotoxicity Analysis with L929 Cells

Previous studies have shown that ozonated vegetable oils have been used topically for healing of cutenous wounds. The aim of this study is to evaluate the dose dependent use of ozonated olive oil with high peroxide value (OZ) on the viability of cells for preventing side effects in topical applications. To the best of our knowledge, there are no reports investigaing the effect of peroxide value of ozonated olive oil associated with its cytotoxic activity on mouse non-neoplastc fibroblast cell lines (L929). Therefore, the present study was carried out by using OZ alone and/or in combination with glycerol and olive oil. In our study OZ was prepared by using pure olive oil. Both olive oil and glycerol are non-toxic and can be mixed with OZ uniformly. The cytotoxic activity of samples against L929 fibroblasts was assessed using the tetrazolium salt 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyltetrazolium bromide (MTT) assay. The peroxide value of synthesized OZ was found to be in the range of 2700–2900 mEq O₂/kg oil. The OZ/olive oil group did not show any cell death at all concentrations tested (p > 0.05) however OZ/glycerol group showed statistically significant reductions in viability at higher concentrations (p = 0.004–0.006) compared to the control group. Conclusively, using OZ/olive oil with a peroxide value of 2700–2900 mEq O₂/kg oil for short-term incubation was non-cytotoxic to the L929 fibroblast cell line.     

A novel strategy for cartilage tissue engineering: Collagenase-loaded cryogel scaffolds in a sheep model

In this study, we developed a novel strategy, through which cartilage tissue pieces were placed in a sheep cartilage defect model and covered with a collagenase incorporated cryogel scaffold (in vivo cartilage tissue engineering, IVCTE group). While applying this strategy, the chondrocytes could be isolated inside the body and the treatment could be accomplished in one session. To compare our strategy, to another group, in which we used cultured cells and Chondro-gide, standard matrix-induced autologous chondrocyte implantation (MACI) was applied. Although the MACI applied group demonstrated better healing than IVCTE, the type II collagen synthesis was better in the IVCTE group compared to MACI applied group. Collagenase did not have detrimental effect on surrounding cartilage in IVCTE group. The preliminary results of the novel strategy applied group (IVCTE) were promising.     

Effect of nano-silica on the chemical durability and mechanical performance of fly ash based geopolymer concrete

In this study, the effect of nano silica on the short term severe durability performance of fly ash based geopolymer concrete (GPC) specimens was investigated. Four types of GPC were produced with two types of low calcium fly ashes (FAI and FAII) with and without nano silica, and ordinary Portland cement concrete (OPC) concrete was also cast for reference. For the geopolymerization process, the alkaline activator has selected a mixture of sodium silicate solution (Na₂SiO₃) and sodium hydroxide solution (NaOH) with a ratio (Na₂SiO₃/ NaOH) of 2.5. Main objectives of the study were to investigate the effect of usability or replaceability of nano silica-based low calcium fly ash based geopolymer concretes instead of OPC concrete in structural applications and make a contribution to standardization process of the fly ash based geopolymer concrete. To achieve the goals, four types of geopolymer and OPC concretes were subjected to sulfuric acid (H₂SO₄), magnesium sulfate (MgSO₄) and seawater (NaCl) solutions with concentrations of 5%, 5%, and 3.5%, respectively. Visual appearances and weight changes of the concretes under chemical environments were utilized for durability aspects. Compressive, splitting tensile and flexural strength tests were also performed on specimens to evaluate the mechanical performance under chemical environments. Results indicated that FAGPC concretes showed superior performance than OPC concrete under chemical attacks due to low calcium content. Amongst the chemical environments, sulfuric acid (H₂SO₄) was found to be the most dangerous environment for all concrete types. In addition, nano silica (NS) addition to FAGPC specimens improved both durability and residual mechanical strength due to the lower porosity and more dense structure. The FAIIGPC specimens including nano silica showed the superior mechanical performance under chemical environment.