Absence of allergenic residues in experimental and commercial wines fined with caseinates

The possible presence of allergenic residues in wines treated with one of the potassium caseinates used as fining agents has been investigated.     

Effect of the doping time of the 1‐butyl‐3‐methylimidazolium ionic liquid cation on the Nafion membrane proprieties

Nafion membranes were prepared by incorporating in the polymer matrix the 1‐butyl‐3‐methylimidazolium (BMI⁺) ionic liquid cation at different doping levels. Increasing the doping time of the membranes with the ionic liquid results in increased incorporation of the BMI⁺ cation but a decrease in the bulk conductivity. The thermogravimetric analysis shows that the BMI⁺ cation incorporation increases the thermal stability of the membranes. The higher discharge efficiency of the fuel cell at 80°C was obtained by using Nafion membrane after 15 minutes of doping in the ionic liquid solution.     

Temperature and electric field dependent hole mobility in a polyfluorene copolymer

Transport of holes in thin films of a low-bandgap alternating polyfluorene copolymer, APFO-Green5, was investigated by means of admittance spectroscopy as a function of field and temperature. The values of hole mobility were evaluated from the position of the maxima in the plots of the negative differential susceptance as a function of frequency. Hole mobility was found to be strongly field- and temperature-dependent. The charge transport parameters were extracted by analyzing the mobility data by the uncorrelated and the correlated Gaussian Disorder Models.     

A tool for design pattern detection and software architecture reconstruction

It is well known that software maintenance and evolution are expensive activities, both in terms of invested time and money. Reverse engineering activities support the obtainment of abstractions and views from a target system that should help the engineers to maintain, evolve and eventually re-engineer it. Two important tasks pursued by reverse engineering are design pattern detection and software architecture reconstruction, whose main objectives are the identification of the design patterns that have been used in the implementation of a system as well as the generation of views placed at different levels of abstractions, which let the practitioners focus on the overall architecture of the system without worrying about the programming details it has been implemented with.In this context we propose an Eclipse plug-in called MARPLE (Metrics and Architecture Reconstruction Plug-in for Eclipse), which supports both the detection of design patterns and software architecture reconstruction activities through the use of basic elements and metrics that are mechanically extracted from the source code. The development of this platform is mainly based on the exploitation of the Eclipse framework and plug-ins as well as of different Java libraries for data access and graph management and visualization. In this paper we focus our attention on the design pattern detection process.     

Physicochemical and Oxidative Changes in Sonicated Interesterified Soybean Oil

The effect of power ultrasound on physicochemical properties and oxidative stability of an interesterified soybean oil (IESBO) was investigated. IESBO was crystallized at 32 °C and sonicated for 10 s with acoustic power of 101 W. The sonicated IESBO was tested for melting behavior and chemical composition and compared to those of non sonicated IESBO to determine physical and chemical changes originated as a consequence of sonication. Application of power ultrasound affected the melting behavior of the crystallized fat and did not affect its chemical composition. Oxidation stability of the sonicated IESBO was measured using peroxide value (PV) and compared to that of non sonicated IESBO and liquid soybean oil (SBO) when stored at 25 °C for 105 days followed by storage at 40 °C for 42 days. Power ultrasound did not cause accelerated oxidation in SBO or IESBO until they were highly oxidized (PV > 10 mequiv/kg). At high levels of oxidation, non‐sonicated IESBO had significantly higher PV than sonicated IESBO, while non‐sonicated SBO had significantly lower PV than sonicated SBO.     

Sub-1 V band-gap based and MOS threshold-voltage based voltage references in 0.13 µm CMOS

Portable and implantable device applications require low supply voltage reference circuits due to increasing trend for lower power requirements. Voltage references have been proposed for operation below 1 V for CMOS and a comprehensive analysis of the behavior of the different topologies is needed for ultra-low power designs, in order to select the right circuit topology for a given requirement. This work compares two major classes of voltage reference topologies: threshold voltage (V_T0)-based and (V_G0) bandgap voltage-based reference circuits. Four different topologies of voltage-reference designs with 1-V supply were designed and fabricated in 130 nm CMOS process. Monte Carlo analysis shows the variability of the references and of their temperature coefficients (TC), and the results are compared to measured samples. Simulations and measurements show that the threshold voltage-based references are more susceptible to the variations in the CMOS fabrication process.     

Empowering Communities Through Design

Francesca Galeazzi is an architectural engineer who leads the sustainability team at Arup Associates in Shanghai. Here she looks back with hindsight from 2050, reflecting on how rapid urbanisation in China, which started in the 1990s, played out over the next half-century. She describes how the initial highly centralised, mass urbanisation programmes gave way to a more local and community-based, participatory approach to decision-making and planning, foreshadowed by some key legislation around land ownership and design for community-based planning models in the early 2010s.     

“Virtual Design Studio”—Part 1: Interdisciplinary design processes

The “Virtual Design Studio (VDS)” is a software platform currently under development in support of an integrated, coordinated and optimized design of buildings and their energy and environmental systems. It is intended to assist collaborating architects, engineers and project management team members throughout from the early phases to the detailed building design development. The platform helps to facilitate the workflow and the processing of information in combination with appropriate, task-based performance simulation tools as further analyzed in Part 2 of this study (DOI: 10.1007/s12273-013-0111-1). The present paper summarizes how VDS relates to the building design process and its typical project stages, performance-based design considerations and respective performance optimization strategies. It outlines the methodology and scope for the organization, implementation and respective requirements for the VDS platform development based on the interdisciplinary design needs. Part 2 will present the methodology for the systems integration and software implementation of VDS.     

From urban renewal to local development. New conceptions and governance practices in the Italian peripheries

This article explores the relationships between changes in the conception of urban peripheries and changes in urban renewal policies, mainly focusing on policy debates and theoretical discourses developed within Italy. The aim is to test the usefulness of a non‐conventional approach to urban peripheries, both from a theoretical and practical point of view. According to this approach, urban peripheries can be thought of as plural and complex places, which are considered to be a fundamental part of the city and as the builders of urban identity. The article initially explores the changes in describing and interpreting urban peripheries, showing how they must be related to actual changes in urban settlement dynamics, as well as to changes in the theoretical frameworks used to understand the phenomenon of the Italian ‘urban periphery’. The article then shows how changes in interpretation have redefined the objectives and methods of policy interventions in the Italian context. Finally, certain critical issues will be discussed, in particular the origins of urban renewal policies and their recent evolution; the redefinition of the local authority role, and the relationships between institutional and social projects and activities. In this view, institutional projects are considered to be the formal projects carried out by public actors, for example municipalities, in order to manage the change in urban peripheries while social projects are understood as the informal practices of inhabitants of peripheries that change their living neighbourhoods.