Influence of the chestnuts drying temperature on the rheological properties of their doughs

Chestnut flour doughs were prepared using chestnut air-dried at 45, 65, and 85 °C with constant load density (8.0 ± 0.6 kg/m²). Mixing curves of doughs using Mixolab^® device showed that chestnut flour doughs dried at 85 °C needed more water absorption to reach the target consistency, (1.1 ± 0.07 Nm). Thermorheological properties were evaluated by means of a controlled stress rheometer. All tested doughs showed shear-thinning behaviour in the steady-shear tests (0.001–1 s^?1). Oscillatory (1–100 rad s^?1 at 0.1% strain), temperature sweep (30–90 °C) and creep-recovery (loading 50 Pa for 60 s) tests showed that flour doughs from chestnuts dried at 85 °C provide interesting properties, particularly remarkable elasticity that is associated with starch gelatinisation. Experimental data were described using various rheological models.     

Synthesis of Titanium Carbonitride Phases by Reactive Milling of the Elemental Mixed Powders

Titanium carbonitride (TiC _x N_{1− x} ) powders were obtained by high-energy ball milling of elemental titanium and carbon (activated carbon or graphite) in a nitrogen atmosphere. The formation of the carbonitride phase was controlled by adequately choosing the experimental conditions of the milling process. The stoichiometry of TiC _x N_{1− x} powders was modified by adjusting the titanium-to-carbon molar ratio. The composition and cell parameters of the carbonitride phases were determined. Microstructural characterization of these phases showed a nanocrystalline nature.     

Hydrodechlorination of 3-chloropyridine and chlorobenzene in methanol solution over alkali-modified zirconia-supported palladium catalysts

The liquid-phase hydrodechlorination of 3-chloropyridine and chlorobenzene has been studied over alkali-modified zirconia-supported palladium catalysts. The modification of the ZrO₂ with alkali metal carbonates improves the catalytic activity of the final palladium catalyst. Therefore, the larger the ionic radii (Li⁺ < Na⁺ < K⁺), the greater the catalytic activity (TOF) of the palladium catalyst. For 3-chloropyridine, hydrodechlorination proceeds without catalyst deactivation. This is explained as the result of the interaction of reaction products (pyridine and HCl) forming pyridinium chloride, thus avoiding the detrimental effect of HCl on the palladium particles. Catalytic hydrodechlorination of chlorobenzene over Pd catalysts exhibits an initial catalytic activity (TOF) much lower than that of 3-chloropyridine and the Pd catalysts deactivate as the reaction proceeds. Finally, chlorobenzene hydrodehalogenation has also been carried out in the presence of an equimolecular amount of pyridine resulting in a decrease in the initial reaction rate on the one hand, but also in an increase in final conversion on the other.     

Mechanisms of hydrocarbon conversion reactions on heterogeneous catalysts: analogies with organometallic chemistry

Catalysis is central to most industrial processes for chemical manufacturing. As catalytic processes have become more complex and more demanding, selectivity has become the central issue in their design. Selectivity is defined by the relative rates of competing reaction pathways available to crucial intermediates, and can be controlled by subtle changes in the nature of the catalyst, the reactants, and/or the reaction conditions. In order to be able to do this in a systematic manner, a good understanding of the catalytic reaction mechanisms is needed. Here a connection is drawn between the key elementary steps comprising hydrocarbon conversion reactions on surfaces and those known to occur on discrete organometallic complexes. This way, the hydrogenation, dehydrogenation, hydrogenolysis, chain growth, and isomerization reactions typical in heterogeneous catalysis are redefined in terms of hydride elimination, oxidative addition, reductive elimination, migratory insertion, and 1, 2-shift elementary steps, among others. It is suggested that the knowledge already available from organometallic chemistry can be used to further advance the understanding of the surface science involved in heterogeneous catalysis. Thanks to the commonality of the chemistry involved, a better synergy could also be established between homogeneous and heterogeneous catalytic development. These ideas are discussed in this article in a critical and personal way.*Invited contribution to the special volume entitled The Interface between Heterogeneous and Homogeneous Catalysis, stemming from contributions at the recent International Symposium on Relations between Heterogeneous and Homogeneous Catalysis, and dedicated to the memory of Robert L. Burwell.     

Biochemical,functional, and histochemical effects of essential fatty acid deficiency in rat kidney

The present study was designed to examine the effects of EFA deficiency (EFAD) on biochemical, functional, and structural aspects of the kidney in growing and adult rats fed a normal or EFAD diet for 9 wk after weaning. Food and fluid intake (FI), urine volume, and Na⁺ and K⁺ excretions were measured weekly from weeks 4 to 8 by placing the rats in individual metabolic cages for 24 h. At week 9, Li⁺ and a 5% water load, respectively, were administered at 14 and 1.5 h prior to glomerular and proximal tubular function studies, as assessed by 3-h creatinine (C_Cr) and Li⁺ (C_Li+) clearances. Hematocrit and urine volume; serum and urine [Cr], [Li⁺], [Na⁺], and [K⁺]; and renal FA distribution were also measured. Data [corrected to 100 g/body weight (bw) and presented as means ±SEM] were significant, at P<-0.05. Despite a similar ingestion of solids from weeks 4 to 7 (weeks 7 to 10 of life), the rats on the EFAD diet showed a decreased body weight from week 5. From weeks 4 to 8, Fl and urine volume were similar for both groups, but the Fl increased at week 6 in the EFAD group; 24-h Na⁺ and K⁺ excretions were similar at all weeks, except for an increase in the EFAD group for both ions at week 7. In the EFAD group, C_Cr and C_Li+ decreased by 27 and 56.3%, respectively (385.7±33.4 vs. 280±21.1, and 21.0±2.1 vs. 9.2±1.1 μL/min/100 g; n=9 vs. 10), the latter result suggesting increased proximal reabsorption. The 3-h Na⁺ and K⁺ excretions were similar, but the Li⁺ decreased (0.78±0.06×10⁻² vs. 0.32±0.03×10⁻² μeq/min/100 g) in the EFAD group, giving additional support to the suggestion. Renal structure was normal and similar for both groups, but the EFAD group showed a more prominent proximal tubule brush border, together with heavier periodic acid-Schiff staining in all specimens from weeks 5 to 9. In the EFAD group, FA of the n−9 and n−7 series were higher, but most of the n−6 series were lower as a percentage of total lipids in the medulla and cortex. Medullary levels of 20∶4n−6 were maintained, 22∶4n−6 declined twice, arachidonic acid was maintained, and 20∶5n−3 was lower. The EFAD diet affected glomerular function, proximal tubular structure and function, and FA distribution in the rat kidney.     

Characterization of Crude and Partially Purified Lipase from Geotrichum candidum Obtained with Different Nitrogen Sources

Lipases from Geotrichum candidum were produced in two different medium: A = 12 % (w/v) clarified corn steep liquor (CCSL) + 0.6 % (w/v) soybean oil (SO) and B = 3.5 % (w/v) yeast hydrolysate (YH) + 0.7 % (w/v) SO. Lipases were partially purified from both media by hydrophobic interaction chromatography using 3.0 mol L^?1 of NaCl as mobile phase, and they were characterized in the crude and partially purified forms. The recovery of lipase activity from CCSL and YH via HIC were 96 and 94.3 %, and the purification factors were 44.3 and 86.7‐fold, respectively. All evaluated lipases had similar optimum pH (7.0–7.7), but, for the CCSL crude lipase, optimum temperature (47 °C) was 10 °C higher than others lipases evaluated. CCSL crude lipase possessed a higher thermo stability than YH crude lipase, e.g., at 37 °C (pH 7.0) the half‐life of CCSL crude lipase was 19.25 h and at pH 8.0 (30 °C) the half‐life was 48 h, which are five and ten times higher than with YH crude lipase, respectively. On the other hand, the YH crude lipase possessed a higher catalytic constant (k_cat = 2.3 min^?1) but with almost the same catalytic efficiency (K_m/k_cat = 32.12 mg mL min^?1) in relation to CCSL crude lipase. The lipases differ in biocatalytic properties between substrates, suggesting that the two lipases can be employed for different applications.     

From Molecules to Behavior in Long-Term Inorganic Mercury Intoxication: Unraveling Proteomic Features in Cerebellar Neurodegeneration of Rats

Mercury is a severe environmental pollutant with neurotoxic effects, especially when exposed for long periods. Although there are several evidences regarding mercury toxicity, little is known about inorganic mercury (IHg) species and cerebellum, one of the main targets of mercury associated with the neurological symptomatology of mercurial poisoning. Besides that, the global proteomic profile assessment is a valuable tool to screen possible biomarkers and elucidate molecular targets of mercury neurotoxicity; however, the literature is still scarce. Thus, this study aimed to investigate the effects of long-term exposure to IHg in adult rats’ cerebellum and explore the modulation of the cerebellar proteome associated with biochemical and functional outcomes, providing evidence, in a translational perspective, of new mercury toxicity targets and possible biomarkers. Fifty-four adult rats were exposed to 0.375 mg/kg of HgCl₂ or distilled water for 45 days using intragastric gavage. Then, the motor functions were evaluated by rotarod and inclined plane. The cerebellum was collected to quantify mercury levels, to assess the antioxidant activity against peroxyl radicals (ACAPs), the lipid peroxidation (LPO), the proteomic profile, the cell death nature by cytotoxicity and apoptosis, and the Purkinje cells density. The IHg exposure increased mercury levels in the cerebellum, reducing ACAP and increasing LPO. The proteomic approach revealed a total 419 proteins with different statuses of regulation, associated with different biological processes, such as synaptic signaling, energy metabolism and nervous system development, e.g., all these molecular changes are associated with increased cytotoxicity and apoptosis, with a neurodegenerative pattern on Purkinje cells layer and poor motor coordination and balance. In conclusion, all these findings feature a neurodegenerative process triggered by IHg in the cerebellum that culminated into motor functions deficits, which are associated with several molecular features and may be related to the clinical outcomes of people exposed to the toxicant.     

Conformational Stabilization of Gp41-Mimetic Miniproteins Opens Up New Ways of Inhibiting HIV-1 Fusion

Inhibition of the HIV-1 fusion process constitutes a promising strategy to neutralize the virus at an early stage before it enters the cell. In this process, the envelope glycoprotein (Env) plays a central role by promoting membrane fusion. We previously identified a vulnerability at the flexible C-terminal end of the gp41 C-terminal heptad repeat (CHR) region to inhibition by a single-chain miniprotein (named covNHR-N) that mimics the first half of the gp41 N-terminal heptad repeat (NHR). The miniprotein exhibited low stability, moderate binding to its complementary CHR region, both as an isolated peptide and in native trimeric Envs, and low inhibitory activity against a panel of pseudoviruses. The addition of a disulfide bond stabilizing the miniprotein increased its inhibitory activity, without altering the binding affinity. Here, to further study the effect of conformational stability on binding and inhibitory potency, we additionally stabilized these miniproteins by engineering a second disulfide bond stapling their N-terminal end, The new disulfide-bond strongly stabilizes the protein, increases binding affinity for the CHR target and strongly improves inhibitory activity against several HIV-1 strains. Moreover, high inhibitory activity could be achieved without targeting the preserved hydrophobic pocket motif of gp41. These results may have implications in the discovery of new strategies to inhibit HIV targeting the gp41 CHR region.     

The Urinary Level of Injury Biomarkers Is Not Univocally Reflective of the Extent of Toxic Renal Tubular Injury in Rats

Nephrotoxicity is a major cause of intrinsic acute kidney injury (AKI). Because renal tissue damage may occur independently of a reduction in glomerular filtration rate and of elevations in plasma creatinine concentration, so-called injury biomarkers have been proposed to form part of diagnostic criteria as reflective of tubular damage independently of renal function status. We studied whether the urinary level of NGAL, KIM-1, GM2AP, t-gelsolin, and REGIIIb informed on the extent of tubular damage in rat models of nephrotoxicity, regardless of the etiology, moment of observation, and underlying pathophysiology. At a time of overt AKI, urinary biomarkers were measured by Western blot or ELISA, and tubular necrosis was scored from histological specimens stained with hematoxylin and eosin. Correlation and regression studies revealed that only weak relations existed between biomarkers and tubular damage. Due to high interindividual variability in the extent of damage for any given biomarker level, urinary injury biomarkers did not necessarily reflect the extent of the underlying tissue injury in individual rats. We contended, in this work, that further pathophysiological contextualization is necessary to understand the diagnostic significance of injury biomarkers before they can be used for renal tubular damage severity stratification in the context of nephrotoxic and, in general, intrinsic AKI.     

Synthesis,characterization, and DFT Raman study of pure and Mn-doped LiTaO3 nanofibers

Pure and Mn-doped lithium tantalate nanofibers, with Mn concentrations of 1%, 2.5%, and 5%, were synthesized by the electrospinning method. The morphology, microstructure, and crystal structure of as-spun and annealed composite nanofibers were characterized by scanning electron microscopy, X-ray diffraction, and transmission electron microscopy. Raman spectroscopy has shown to be a powerful tool to detect either local variations or changes of the whole structure. Position and width of one Raman line can be used as markers of a structural change. Some vibrational modes are especially associated with the site of Li or Ta ions and so, they can be affected by the introduction of dopant ions. Any damages or local changes in the microstructure can be detected by a line broadening. With the use of Raman spectroscopy, the sites where Mn ions enter the doped structures were established by recording the shift and broadening of peaks in Mn-doped structures with respect to pure lithium tantalate. Thus it was proven that Mn ions enter the Li sites for low Mn concentration and, on the other hand, for higher concentrations, the dopant substitutes Li and Ta sites. First-principles calculations were performed within the density functional theory, including lattice-dynamic calculations of the phonon modes at the zone center (Γ point), for the pure structure, to find the irreducible representation of the modes.