Formation of hydrophilic starch coatings on polyethylene films

Thin starch coatings were deposited onto polyethylene (PE) film surfaces when PE films were immersed in 1% jet cooked starch solutions and the hot solutions were allowed to cool. Normal cornstarch, waxy cornstarch, high amylose cornstarch, and solvent‐extracted normal cornstarch (to remove native lipid) were used in these experiments. Amounts of adsorbed starch varied from about 0.03–0.05 mg per cm² of PE, and these starch coatings imparted hydrophilic properties to film surfaces, as evidenced by contact angle measurements. Although starch could be removed by gently rubbing water‐wet PE surfaces, air‐dried coatings were more firmly attached, and did not separate from the PE surface when films were bent or flexed. SEM images of starch‐coated film surfaces showed that starch was deposited as particles less than 1 μm in diameter, and also as aggregates of these submicron particles. Despite the fact that some starch samples contained only very small amounts of amylose and native lipid, surface‐deposited starch in all experiments contained 90–100% amylose; and exhibited the same V_h X‐ray diffraction pattern, indicative of helical inclusion complex formation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1781–1788, 2002; DOI 10.1002/app.10589     

First Identification of a Putative Sex Pheromone in a Praying Mantid

Praying mantids are models for a wide variety of behavioral, physiological, and ecological studies, and sex pheromones have been assumed to be important components of their biology. However, no mantid pheromone has ever been identified. We collected volatiles emitted by females of the mantid, Sphodromantis lineola, via solid phase microextraction (SPME). Mass spectral analysis revealed the collected volatiles to be a mixture of pentadecanal and tetradecanal. We prepared a synthetic mixture of these compounds, and found that males were both attracted to this mixture and stimulated to exhibit typical precopulatory behavior. We then examined male antennae with scanning electron microscopy, and confirmed the presence of porous antennal sensilla typical of insect pheromone receptors, i.e., that male mantids are equipped with the appropriate morphological apparatus to receive volatile chemical signals. Pheromones, in conjunction with visual and tactile cues, are thus an important feature of the reproductive biology of this, and undoubtedly other species of mantids. In addition to adding a crucial aspect of behavioral biology to our knowledge of this group, identification and synthesis of mantid pheromones may be a first step in attracting and aggregating these generalist predators for use in pest control.     

Spectral and complexity analysis of scalp EEG characteristics for mild cognitive impairment and early Alzheimer's disease

Amnestic mild cognitive impairment (aMCI) often is an early stage of Alzheimer's disease (AD). MCI is characterized by cognitive decline departing from normal cognitive aging but that does not significantly interfere with daily activities. This study explores the potential of scalp EEG for early detection of alterations from cognitively normal status of older adults signifying MCI and AD. Resting 32-channel EEG records from 48 age-matched participants (mean age 75.7 years)—15 normal controls (NC), 16 early MCI, and 17 early stage AD—are examined. Regional spectral and complexity features are computed and used in a support vector machine model to discriminate between groups. Analyses based on three-way classifications demonstrate overall discrimination accuracies of 83.3%, 85.4%, and 79.2% for resting eyes open, counting eyes closed, and resting eyes closed protocols, respectively. These results demonstrate the great promise for scalp EEG spectral and complexity features as noninvasive biomarkers for detection of MCI and early AD.     

Void formation in a filled SBR rubber determined by small-angle X-ray scattering

Two commercial styrene-butadiene (SBR) latexes were used to prepare a model filled material consisting of glassy SBR filler particles about 1000 Å in diameter embedded in a rubbery SBR matrix crosslinked by γ-radiation. When transparent specimens of this material were extended, voiding occurred, as evidenced by stress whitening and greatly enhanced X-ray scattering intensity. More voids were formed at higher rates of extension, but voids disappeared when specimens were relaxed. The effects of filler content and cure time of the matrix on the size and number of voids formed were determined by low-angle X-ray scattering for a constant extension rate and a constant extension ratio λ = 1.6. The number of voids measured by X-ray scattering intensity decreased rapidly with time over the 3-h period of measurement. The number of voids remaining 1 h after extension increased about 40 times as filler content was increased from 15% to 50%. Increasing the cure time from 24 to 96 h increased the number of voids about four times. In contrast, the radius of gyration of the voids formed (250–350 Å) did not depend strongly on time, nor did it depend strongly on the filler content or the cure time of the matrix. Stress relaxation measurements made under the same conditions as X-ray scattering measurements showed effects typical of filled materials. However, the relaxation of stress (which followed a power law decay) was much slower than the decay of the number of voids as measured by X-ray scattering intensity.     

Development of optical anisotropy in vitrains during carbonization

The purpose of this work was to examine the possible significance in the formation of metallurgical coke of the anisotropic spherical mesophase exemplified by that found during the carbonization of pitch-like materials, and to ascertain if the various types of optical anisotropy found in coke could form a basis for the characterization of cokes produced from different coals. Vitrains from a wide range of coals were carbonized at temperatures from 370 to 1000 °C and the types and amounts of optical anisotropy in the resulting semi-cokes and cokes were determined from microscopic examination, the anisotropic components being classified according to grain size of the granular mosaics and appearance. The anisotropy developed directly from the isotropic phase, appearing initially as a fine-grained mosaic. With increasing carbonization temperature, this fine-grained mosaic was transformed into progressively coarser-grained anisotropy, the extent of this transformation depending on the rank of the vitrain. It is therefore concluded that the formation, growth and coalescence of anisotropic spherical bodies, such as occurs during the carbonization of pitch, is not a necessary precursor of the mosaic anisotropy in coke. The type and amount of anisotropy developed provide a quantitative means of characterising different cokes.     

Rapid detection of antigen binding by antibody fragments expressed in the periplasm of Escherichia coli

Bacterial expression systems can greatly facilitate proteinengineering of antibodies. We have developed a system for high-levelexpression of antibodies, antibody fragments, or hybrid antibodieswith novel effector functions in the periplasm of Escherichiacoli. From 5 ml of cells, a simple extraction yields sufficientmaterial for SDS-gel electro-phoresis, detection and characterizationof hapten binding. To demonstrate our system, heavy-chain variableregions and 1 light chains of a mouse anti-NP antibody weresynthesized as hybrid proteins with a bacterial signal peptide(Omp F). Each chain is secreted into the periplasm where processing(cleavage of the signal peptide), folding and heterodimer associationtake place. Periplasmic proteins are released by cold osmoticshock, and hapten-binding activity is easily detected withoutfurther manipulation. The ease of genetic engineering in thissystem will facilitate the production of immunoglobulin derivativesdesigned for specific applications, and expression of thesemolecules in a native state will allow the rapid screening ofcombinatorial libraries and the results of mutagenesis.     

Uniting Strength and Toughness of Al Matrix Composites with Coordinated Al3Ni and Al3Ti Reinforcements

Hybrid aluminum composites are fabricated in a novel manner to characteristically induce a layer‐wise aligned distribution of micro‐scale Al₃Ni and Al₃Ti intermetallic particles that are formed in situ within a ductile Al matrix. The simple and unique Rolling of Randomly Orientated Layer‐wise Materials (RROLM) manufacturing methodology enables microstructural tailoring of the intermetallic reinforcing particles to prescribe enhanced crack tip deflection caused by the complex interaction of local veins of reinforcement particles, in an effort to overshadow the classical loss of toughness in large‐particle reinforced composites. The complimentary reinforcements and their interface with the Al matrix are revealed to have a gradual transition zone that functions to maintain critical cohesion with the particles and the matrix, empowering the superior load transfer capability of the particles, and reducing microvoid penetration into the matrix. In situ three‐point bending observations combined with a local strain field analysis, demonstrate the distinctive crack deflection mechanisms exhibit by the composite. Deviating from the norm, this specialized particle reinforced composite exhibited both strengthening and toughening mechanisms simultaneously, over control samples. The investigated design strategy and model material will assist materials development toward light‐weight, stronger, and tougher particle reinforced Al matrix composites.     

Making the ‘MOST’ out of RFID technology: a research agenda for the study of the adoption,usage and impact of RFID

Radio frequency identification (RFID) technology dramatically increases the ability of the organization to acquire a vast array of data about the location and properties of any entity that can be physically tagged and wirelessly scanned within certain technical limitations. RFID can be applied to a variety of tasks, structures, work systems and contexts along the value chain, including business-to-business logistics, internal operations, business-to-consumer marketing, and after-sales service applications. As industry adoption of RFID increases there is an emerging interest by academic researchers to engage in scholarly investigation to understand how RFID relates to mobility, organizational and systems technologies (MOST). In this paper, we explore RFID and propose a research agenda to address a series of broad research questions related to how RFID technology: (1) is developed, adopted, and implemented by organizations; (2) is used, supported, and evolved within organizations and alliances; and (3) impacts individuals, business processes, organizations, and markets. As with many technological innovations, as the technical problems associated with implementing and using RFID are addressed and resolved, the managerial and organizational issues will emerge as critical areas for IS research.

Physiological and ergonomics factors in running shoe design

Various features of the design of running shoes have been known to affect the performance and safety of athletes. The performance related effects of shoe design on traction and on the economy of locomotion are reviewed in this paper. Traction measurements in various types of running shoes and on various surfaces appear adequate for all but running on wet asphalt roads. Future designs should improve traction for those conditions. Effects on the economy of locomotion as small as 1% can be determined using conventional oxygen uptake measurements. The effect of carrying extra weight on the foot during running has been measured at 1% per 100 g per foot. The cost of carrying similar weights is much lower for walking or for running when the weight is carried nearer the body's centre of mass. Cushioning and other features of shoe design besides weight have been shown to have significant effects on the economy of locomotion. Optimum designs for maximising running performance should provide sufficient traction, minimal weight and maximum cushioning.     

A generalized finite-difference time-domain quantum method for the N-body interacting Hamiltonian

The Quantum Finite-Difference Time-Domain (FDTD-Q) method is a numerical method for solving the time evolution of the Schrödinger equation. It can be applied to systems of interacting particles, allowing for realistic simulations of quantum mechanics of various experimental systems. One of the drawbacks of the method is that divergences in the numerical evolution occur rather easily in the presence of interactions, which necessitates a large number of evolution steps or imaginary time evolution. We present a generalized (GFDTD-Q) method for solving the time-dependent Schrödinger equation including interactions between the particles. The new scheme provides a more relaxed condition for stability when the finite difference approximations for spatial derivatives are employed, as compared with the original FDTD-Q scheme. We demonstrate our scheme by simulating the time evolution of a two-particle interaction Hamiltonian. Our results show that the generalized method allows for stable time evolutions, in contrast to the original FDTD-Q scheme which produces a divergent solution.