Effects of alkyl substitution on the physical properties and gas transport behavior in selected poly(R-phenoxyphosphazenes)

A systematic preparation of alkyl substituted phenoxyphosphazene polymers was performed and their gas transport properties determined. In this study, phosphazenes substituted with 4-methylphenol, 4-ethylphenol, and 4-isopropylphenol are reported. An additional polymer substituted with 4-tert-butylphenoxy-1-ethanol also was synthesized in this work. Data derived for these materials, including chemical, thermal and gas transport characterization, were compared to previous reports discussing poly[bis-phenoxyphosphazene] and its analog with tert-butyl substitution: poly[bis-(4-tert-butylphenoxy)phosphazene]. The tert-butyl moiety influences orderly chain packing, presumably through steric hindrance that can influence aromatic π-stacking. For the new poly[(alkylphenoxy)phosphazenes], semicrystallinity is maintained and the added steric bulk serves to decrease the polymer glass transition temperature (Tg) and increase both permeability and selectivity for the gas pairs: O₂/N₂ and CO₂/CH₄. Removal of the tert-butyl moiety from the immediate vicinity of the backbone through a flexible spacer serves to depress the Tg as compared to poly[bis-(4-tert-butylphenoxy)phosphazene], but provides no performance enhancement for gas transport.     

Using an additive to control the electrospinning of fibres of poly(ε‐caprolactone)

Electrospinning is a route to polymer fibres with diameters considerably smaller than available from most fibre‐producing techniques. We explore the use of a low molecular weight compound as an effective control additive during the electrospinning of poly(ε‐caprolactone). This approach extends the control variables for the electrospinning of nanoscale fibres from the more usual ones such as the polymer molecular weight, solvent and concentration. We show that through the use of dual solvent systems, we can alter the impact of the additive on the electrospinning process so that finer as well as thicker fibres can be prepared under otherwise identical conditions. As well as the size of the fibres and the number of beads, the use of the additive allows us to alter the level of crystallinity as well as the level of preferred orientation of the poly(ε‐caprolactone) crystals. This approach, involving the use of a dual solvent and a low molar mass compound, offers considerable potential for application to other polymer systems. Copyright © 2010 Society of Chemical Industry     

An Ultrafine,Water-Based Condensation Particle Counter and its Evaluation under Field Conditions

An ultrafine, water-based condensation particle counter (U-WCPC, TSI Model 3786) has been compared to a butanol-based ultrafine counter (U-BCPC, TSI Model 3025) for measurement of atmospheric and freeway-tunnel aerosols. The U-WCPC utilizes a warm, wet-walled growth tube to activate and grow particles through water condensation in a laminar-flow. It has an aerosol sampling rate of 0.3 L/min, and a nominal detection limit near 3 nm. Several field comparisons were made to the butanol-based instrument with the same nominal detection limit. For measurements of size-selected aerosols with diameters of 5 nm and larger the two instruments generally agreed, with a mean response within 5%. At 3 nm particle size differences were observed, and these differences varied with the data set. Measurements of ambient aerosol in Boulder, Colorado showed higher counting efficiency at 3 nm with the U-BCPC, while in a California freeway tunnel the opposite trend was observed, with higher counting efficiencies at 3 nm observed by the U-WCPC. For direct measurement of atmospheric aerosols, the two types of instruments yielded equivalent concentrations, independent of particle number concentration.     

Response to Al-Khanji, Budesheim, and Soucar's letter.

F. A. DiBlasio responds to K. Al-Khanji's comments (see record 2000-00240-005) on decision-based forgiveness treatment in cases of marital infidelity. The original author states that the primary concern of making therapy culturally sensitive is an important issue and a worthy endeavor of all clinicians. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Bacterial contamination of cucumber fruit through adhesion

In this study, the adhesion of bacteria to fresh cucumber surfaces in aqueous suspension was shown to be dependent on time of incubation, inoculum species and concentration, and temperature. The adhesion of bacteria to the fruit in wash water was less extensive at lower temperatures and shorter exposure times. Various species of bacteria were adsorbed to cucumber surfaces in the following relative order: Salmonella Typhimurium > Staphylococcus aureus > Lactobacillus plantarum > Listeria monocytogenes. Cells were adsorbed at all temperatures tested (5, 15, 25, and 35 degrees C) at levels that depended on incubation time, but the numbers of cells adsorbed were larger at higher incubation temperatures. Levels of adhesion of bacteria to dewaxed fruit were higher for L. monocytogenes and lower for Salmonella Typhimurium, L. plantarum, and S. aureus than were levels of adhesion to waxed fruit.     

The relationship between body weight and risk of death and serious injury in motor vehicle crashes

We sought to investigate the effect of increased body weight on the risk of death and serious injury to occupants in motor vehicle crashes. We employed a retrospective cohort study design utilizing data from the National Automotive Sampling System, Crashworthiness Data System (CDS), 1993-1996. Subjects in the study included occupants involved in tow-away crashes of passenger cars, light trucks, vans and sport utility vehicles. Two outcomes were analyzed: death within 30 days of the crash and injury severity score (ISS). Two exposures were considered: occupant body weight and body mass index (BMI; kg/m2). Occupant weight was available on 27263 subjects (76%) in the CDS database. Mortality was 0.67%. Increased body weight was associated with increased risk of mortality and increased risk of severe injury. The odds ratio for death was 1.013 (95% CI: 1.007, 1.018) for each kilogram increase in body weight. The odds ratio for sustaining an injury with ISS > or = 9 was 1.008 (95% CI: 1.004, 1.011) for each kilogram increase in body weight. After adjustment for potentially confounding variables (age, gender, seatbelt use, seat position and vehicle curbweight), the significant relationship between occupant weight and mortality persisted. After adjustment, the relationship between occupant weight and ISS was present, although less marked. Similar trends were found when BMI was analyzed as the exposure. In conclusion, increased occupant body weight is associated with increased mortality in automobile crashes. This is probably due in part to increased co-morbid factors in the more overweight occupants. However, it is possibly also due to an increased severity of injury in these occupants. These findings may have implications for vehicle safety design, as well as for transport safety policy.     

Design of angle-tolerant multivariate optical elements for chemical imaging

Multivariate optical elements (MOEs) are multilayer optical interference coatings with arbitrary spectral profiles that are used in multivariate pattern recognition to perform the task of projecting magnitudes of special basis functions (regression vectors) out of optical spectra. Because MOEs depend on optical interference effects, their performance is sensitive to the angle of incidence of incident light. This angle dependence complicates their use in imaging applications. We report a method for the design of angle-insensitive MOEs based on modification of a previously described nonlinear optimization algorithm. This algorithm operates when the effects of deviant angles of incidence are simulated prior to optimization, which treats the angular deviation as an interferent in the measurement. To demonstrate the algorithm, a 13-layer imaging MOE (IMOE, with alternating layers of high-index Nb2O5 and low-index SiO2) for the determination of Bismarck Brown dye in mixtures of Bismarck Brown and Crystal Violet, was designed and its performance simulated. For angles of incidence that range from 42 degrees to 48 degrees, the IMOE has an average standard error of prediction (SEP) of 0.55 microM for Bismarck Brown. This compares with a SEP of 2.8 microM for a MOE designed by a fixed-angle algorithm.     

Atomic-precision multilayer coating of the first set of optics for an extreme-ultraviolet lithography prototype system

We present our results of coating a first set of optical elements for an extreme-ultraviolet (EUV) lithography system. The optics were coated with Mo-Si multilayer mirrors by dc magnetron sputtering and characterized by synchrotron radiation. Near-normal incidence reflectances above 65% were achieved at 13.35 nm. The run-to-run reproducibility of the reflectance peak wavelength was maintained to within 0.4%, and the thickness uniformity (or gradient) was controlled to within +/-0.05% peak to valley, exceeding the prescribed specification. The deposition technique used for this study is an enabling technology for EUV lithography, making it possible to fabricate multilayer-coated optics to accuracies commensurate with atomic dimensions.