鄱阳湖湖底沉积物放射性水平

本文报道了1985年鄱阳湖湖底沉积物放射性水平的调查结果。沉积物中 U、Th、~(226)Ra、~(40)(?)和~(137)Cs 的比活度分别为64.8、67.9,58.9、676.1和3.5Bq/kg;用~(137)Cs 测龄方法作了沉积物泥芯垂直深度的年代定位,由此得知1985—1958年对应深度沉积物中 U、Th、~(226)Ra 和~(40)K 的比活度与1957—1930年对应深度沉积物比较无显著性差异;U、Th 和~(226)Ra 的浓集因予分别为5.2×10~413.9×10~4和4.8×10~4L/kg。     

Feature Reduction via Generalized Uncorrelated Linear Discriminant Analysis

High-dimensional data appear in many applications of data mining, machine learning, and bioinformatics. Feature reduction is commonly applied as a preprocessing step to overcome the curse of dimensionality. Uncorrelated Linear Discriminant Analysis (ULDA) was recently proposed for feature reduction. The extracted features via ULDA were shown to be statistically uncorrelated, which is desirable for many applications. In this paper, an algorithm called ULDA/QR is proposed to simplify the previous implementation of ULDA. Then, the ULDA/GSVD algorithm is proposed, based on a novel optimization criterion, to address the singularity problem which occurs in undersampled problems, where the data dimension is larger than the sample size. The criterion used is the regularized version of the one in ULDA/QR. Surprisingly, our theoretical result shows that the solution to ULDA/GSVD is independent of the value of the regularization parameter. Experimental results on various types of data sets are reported to show the effectiveness of the proposed algorithm and to compare it with other commonly used feature reduction algorithms.     

Microstructure investigations of ball milled materials

HREM and FEG TEM were emphasized and extensively used to follow the most subtle changes in the structure and composition of ball-milled Cu, Fe-Cu, and thermally decomposed Fe60Cu40. Some significant results are obtained and summarized as follows: HREM shows that the deformation of ball-milled copper proceeds mainly by twinning and shear bands (SBs) formation. The nano-grains formed during ball milling (BM) contain a high density of dislocations. The grain boundaries (GBs) of nanocrystalline (NC) Cu prepared by BM are ordered, curved, and strained, but disordering, lattice distortion, and nanovoids in local regions were frequently observed. Nanoscale composition analysis on mechanically alloyed Fe16Cu84 shows that the average Fe content in both the interior of grains and the GBs is close to the designed composition, which proves that a supersaturated solid solution has really formed. However, the Fe content is rather inhomogeneous between the larger and smaller grains, which infers the inhomogeneous mixing of Fe and Cu during mechanical alloying (MA). NC structure and the mechanical force-enhanced fast diffusion are the reasons of the formation of supersaturated solid solutions in immiscible systems with positive enthalpy of mixing. HREM observations carried out with the thermally decomposed Fe60Cu40 solid solution show that the Nishiyama (N-W) or Kurdyumov-Sachs (K-S) orientation relationships exist between alpha-Fe and Cu. Energy dispersive X-ray spectra (EDXS) results show that the Cu content in these alpha-Fe grains reaches as high as 9.5 at.% even after heating to 1,400 degrees C, which is even higher than the maximum solubility of Cu in gamma-Fe at 1,094 degrees C.     

高校资产管理系统的设计与研究

设计了适合衢州职业技术学院固定资产日常管理工作的资产管理系统.对该系统作了需求分析和详细设计,采用了ASP.NET框架技术和SQL Server后台数据库相结合的设计方法.系统基本实现了资产的登记、审核、查询、变更、统计、打印报表、上报数据等功能,有效地解决了资产管理工作的数据混乱、不准确、处理流程不规范等问题,有效地提高了管理人员的工作效率.     

计算机网络技术的发展现状和趋势分析

文章首先概述了计算机网络发展的历程与现状,并分析当今计算机网络发展中存在的一些问题,然后对计算机网络的发展趋势及策略进行总结分析,为当今计算机网络的良性发展出谋划策。     

基于呼叫中心的客户关系管理系统服务流程优化研究

针对钢铁企业物流公司客户关系管理现状,及其客户服务请求处理流程中的不足,提出了基于呼叫中心的钢铁企业最优化客服请求处理流程及其技术实现,给出了平台功能设计,探讨了平台实现的关键技术。该系统充分满足客户满意度以及服务请求处理的及时性,快速性,确切性,可操作性等方面要求。     

基于1553B和外部FLASH实现星上FPGA配置

太阳辐射监测仪作为某卫星载荷之一,其控制系统主要由DSP+FPGA组成,文章利用1553B和外部Flash实现了系统上电后自动配置FPGA;首先,利用1553B通讯芯片上传FPGA和DSP代码到外部RAM,并通过DSP烧写程序分别烧写到Flash的合理区域;系统上电后,DSP从Flash 0x0地址运行,初始化后运行FPGA配置程序,实现FPGA的动态配置;避免了FPGA跑飞后需要重新上电和归零,提高了系统的可靠性;省去了FPGA专用配置EPROM芯片,简化结构,降低了系统成本;实践证明,FPGA加载时间约2分钟,可定时加载或命令控制加载,该方法简单实用,适合星上载荷使用。     

太阳辐照绝对辐射计的精密温度控制系统设计

为了提高太阳辐照绝对辐射计(SIARs)的测量精度,消除温度变化对SIARs测量精度的影响,研究设计了精密温度控制系统,对SIARs进行恒温控制;通过对铂电阻温度传感器自热效应的弱化,提高了温度测量的精度;提出了一种新的复合PID控制算法,该复合控制算法使系统获得良好的动态和稳态性能;使用密闭的高低温箱来模拟星上温度条件对系统进行了实验测试,实验数据表明,系统控制精度在0.1℃以内,可为SIARs工作提供稳定的温度环境。     

基于MAX16802B的水下相机控制系统设计

水下相机对海洋生物科学研究有重要意义,其控制系统的设计关键在于光源控制方案以及电源效率的提高;提出并实现了一种基于低功耗微控制器、高亮LED光源以及LED控制驱动器MAX16802B的水下相机控制系统,详细介绍了系统组成,并给出了基于低功耗策略的硬件和软件优化设计方案;实验结果表明,该设计方案电路结构简单,稳定性好,电源效率达75%以上,能够满足长时间水下拍摄工作;在实际海下测试中,按20分钟的拍摄间隔需求,水下相机可连续工作2个月以上。     

视觉测量中多光学靶点亮度自适应控制

提出了一种面向大视场高精度视觉测量的多红外目标靶点（红外LED）亮度自适应控制方法。以微控制器PIC16F873A和LED驱动芯片MAX6964作为核心器件,设计了可满足大空间范围内靶点亮度控制需求的多目标靶点控制驱动器。为了使LED在近距测量时的调节精度和远近距离测量时的发光亮度都能满足要求,根据MAX6964输出特点设计了PWM信号输出电路,并采用推挽电路驱动LED。实验证明,目标靶点在CCD相机上成像光斑稳定一致。