Information geometry of turbo and low-density parity-check codes

Since the proposal of turbo codes in 1993, many studies have appeared on this simple and new type of codes which give a powerful and practical performance of error correction. Although experimental results strongly support the efficacy of turbo codes, further theoretical analysis is necessary, which is not straightforward. It is pointed out that the iterative decoding algorithm of turbo codes shares essentially similar ideas with low-density parity-check (LDPC) codes, with Pearl's belief propagation algorithm applied to a cyclic belief diagram, and with the Bethe approximation in statistical physics. Therefore, the analysis of the turbo decoding algorithm will reveal the mystery of those similar iterative methods. In this paper, we recapture and extend the geometrical framework initiated by Richardson to the information geometrical framework of dual affine connections, focusing on both of the turbo and LDPC decoding algorithms. The framework helps our intuitive understanding of the algorithms and opens a new prospect of further analysis. We reveal some properties of these codes in the proposed framework, including the stability and error analysis. Based on the error analysis, we finally propose a correction term for improving the approximation.     

Topic allocation method on edge servers for latency-sensitive notification service

The importance of real-time notification has been growing for social services and Intelligent Transporting System (ITS). As an advanced version of Pub/Sub systems, publish-process-subscribe systems, where published messages are spooled and processed on edge servers, have been proposed to achieve data-driven intelligent notifications. In this paper, we present a system that allows a topic to be managed on multiple edge servers so that messages are processed near the publishers, even when publishers spread over a wide area. Duplicating messages on geographically distributed servers could enable immediate notification to neighboring subscribers. However, the duplicated message spool may cause exhaustion of resources. We prepare a formal model of our publish-process-subscribe system and formulate the topic allocation as an optimization problem under the resource constraints of edge servers. As the optimization problem is NP-hard, we propose heuristics leveraging the locality and the pub/sub relationships observed between clients to use the edge server resources efficiently. Our performance evaluation shows that our method reduces the delay to deliver notifications and the effectiveness of the strategy exploiting the relationships between clients.     

Fabrication of (Pb,La)(Zr,Ti)O/sub 3/ thin-film arrayed waveguide grating

The design and fabrication of an 8-ch, 500 GHz-spacing arrayed waveguide grating on (Pb,La)(Zr,Ti)O₃ has been successfully achieved for the first time. An insertion loss of 22.1 dB, including a 10 dB coupling loss, and an adjacent crosstalk of -23.1 dB have been obtained. The device is expected to be monolithically integrated into high-speed optical switches to form integrated chips such as a reconfigurable add-drop multiplexer     

In situ high-resolution transmission electron microscopy of photocatalytic reactions by excited electrons in ionic liquid

A transmission electron microscope (TEM) sample for observing photocatalysis in a liquid was prepared by using N,N,N-trimetyl-N-propylammonium-bis(trifluoromethanesulfonyl)imide. The ionic liquid (IL) was used as a reaction solvent. Tetrachloroauric acid was dissolved in the IL as gold ion species. Rutile particles were added in the solution as a photocatalyst. The low vapor pressure of the IL enables a diffusing system in high vacuum of TEM. Rutile particles were UV irradiated in that liquid phase. After 3 h UV irradiation, a gold particle of 8 nm diameter was grown on the TiO2 surface. Photonucleation of Au/TiO2 system was discussed from the high-resolution TEM images.     

Beam alignment and related problems of spherical aberration corrected high-resolution TEM images

For spherical aberration corrected transmission electron microscopes recently developed, the Scherzer resolution in proportion to C(s) 1/4 lambda 3/4 is still inevitably limited by the influence of some other electron optical factors, such as chromatic aberration coefficient of objective lens (C(c)), beam divergence and alignment, incident electron energy spread (deltaE), and the instability of accelerating voltage (deltaV) and of lens current (deltaI). Depending on the image resolution guaranteed by C(s) correction, the defocus spread caused by C(c), deltaV, deltaI and deltaE would need to be reduced. The effect of beam alignment as a phase shift in contrast transfer function is also studied for the C(s) corrected microscopes with different values of C(s), defocus and spatial frequency. There is a relationship between the phase shift and defocus that allows us to find a series of 'alignment-free' focal conditions. A triangular relation among C(s), defocus and lattice spacing is established for proper image contrast and 'alignment-free' imaging with the C(s) corrected microscope.     

Advanced base station technologies for UTRAN

To achieve high capacity and to support high-data-rate services in the terrestrial access network (UTRAN) of the third generation Universal Mobile Telecommunications System (UMTS), it is essential to employ some advanced transceiver techniques at the base stations. Three such techniques are presented: adaptive antennas, multistage parallel interference cancellers and a new hybrid scheme. The operation principles and some simulation results of the techniques are given and some challenging implementation issues are discussed     

Hydroxyl group formation caused by hydrogen diffusion into optical glass fibre

Transmission loss increase of optical glass fibre caused by hydrogen diffusion is measured as a function of temperature and partial pressure of hydrogen gas. The activation energy of hydroxyl group formation from the diffused molecular hydrogen was found to be 15.9 kcal/mole. Also the hydroxyl absorption loss increase at 200°C was found to be proportional to the square root of the partial pressure of hydrogen gas.     

A less invasive Emax estimation method for weaning fromcardiac assistance

The maximum elastance of the ventricle (E_max) is a strong candidate for a quantitative index used for determination of the timing of weaning the patient from a left ventricular assist device (LVAD). The authors present a new and less invasive method for deriving E_max of the left ventricle under the LVAD assistance. In this method (the CoP method), E_max can be calculated from two different end-systolic points which are produced by changing the drive phase of LVAD without any vascular clamping and any direct measurement of the left ventricular volume. Animal experiments indicated that the CoP method is useful when the measured left ventricular flow and pressure are employed. Moreover, a new technique for estimating the left ventricular flow was developed to make the CoP method less invasive without direct measurement of the flow. The technique could considerably improve the estimation accuracy of the flow in the co-pulsation mode in comparison with the previous one proposed by the authors. However, it has been revealed that the estimation accuracy of the left ventricular flow was not globally high enough to apply the CoP method to clinical cases in spite of its much less invasiveness     

A 16-ns 1-Mb CMOS EPROM

A 16-ns 1-Mb CMOS EPROM has been developed utilizing high-speed circuit technology and a double-metal process. In order to achieve the fast access time, a differential sensing scheme with address transition detection (ATD) is used. A double-word-line structure is used to reduce word-line delay. High noise immunity is obtained by a bit-line bias circuit and data-latch circuit. Sufficient threshold voltage shift (indispensable for fast access time) is guaranteed by a threshold monitoring program (TMP) scheme. The array is organized as 64 K×16 b, which is suitable for 32-b high-performance microprocessors. The active power is 425 mW, the programming time is 100 μs, and the chip size is 4.94×15.64 mm²     

Transmission Characteristics of Hybrid Modes in Corrugated Waveguides Above the Bragg Frequency

We studied the transmission characteristics of hybrid modes in a corrugated circular waveguide above the Bragg frequency to develop a broad-band transmission line for millimeter waves. Millimeter waves at 294 GHz were transmitted into a straight waveguide. From observed power profiles in waveguide cross-sections, a high attenuation rate of 0.13 dB/m was obtained. To match a theoretical attenuation constant with the experimental one, we introduced an ad hoc coefficient of conventional surface reactance in the waveguide wall. This was necessary because the wall began to look like the surface with a decreasing anisotropic reactance owing to the frequency above the Bragg frequency. Using nonlinear optimization for mode content analysis, the observed power profiles in the waveguide cross-section were matched with theoretical profiles. There was good agreement between the calculated and observed centers of power profiles and attenuation rate along the waveguide. The theoretical analysis showed that the magnetic field at the waveguide wall increases and the substantial attenuation takes place. Above the Bragg frequency coupling to backwards propagating modes is a point of consideration. A combination of the backwards propagating EH_1,26 and the forward propagating HE₁₁ modes satisfied the Bragg condition at 294.7 GHz which was the nearest frequency of operating frequency. A strong attenuation of the incoming HE₁₁ mode by Bragg resonance was not expected due to large difference of 0.7 GHz. It becomes clear that the observed high transmission loss outside of the Bragg resonance can be explained by a decrease in anisotropic surface reactance at the wall.