Asynchronous control for two‐dimensional hidden Markovian jump systems with partly known mode observation conditional probabilities

This study focuses on the asynchronous control problem for two‐dimensional discrete‐time hidden Markovian jump systems where the mode observation conditional probability matrix is partly known. Considering the original system modes are invisible, the observed modes emitted from an observer serve as an alternative for stability analysis and controller design where a mode observation conditional probability matrix is constructed to characterize the emission between system modes and observed modes. Specially, only partly known information of the mode observation conditional probability matrix is accessible. With the introduction of the free‐connection weighting matrices, the asymptotic mean square stability criterion is firstly derived based on Lyapunov method. This introduction provides a further degree of relaxation and less conservatism is therefore achieved. Secondly, we present synthesis conditions for asynchronous state feedback controller design given in terms of a set of interconnected linear matrix inequalities. Moreover, cluster concept based on the partitions of observed modes is adopted which helps to decrease the number of controllers and simplify the design complexity. A numerical example, regarding the cases with and without clustering of the observed modes, is presented to illustrate the effectiveness of the proposed method.     

Why Cryptosystems Fail Revisited

Wireless Personal Communications - In the paper “Why Cryptosystems Fail”, Ross Anderson ponders the question about why cryptosystems really fail. Obviously, there may be weak...     

Information‐driven robotic sampling in the coastal ocean

Efficient sampling of coastal ocean processes, especially mechanisms such as upwelling and internal waves and their influence on primary production, is critical for understanding our changing oceans. Coupling robotic sampling with ocean models provides an effective approach to adaptively sample such features. We present methods that capitalize on information from ocean models and in situ measurements, using Gaussian process modeling and objective functions, allowing sampling efforts to be concentrated to regions with high scientific interest. We demonstrate how to combine and correlate marine data from autonomous underwater vehicles, model forecasts, remote sensing satellite, buoy, and ship‐based measurements, as a means to cross‐validate and improve ocean model accuracy, in addition to resolving upper water‐column interactions. Our work is focused on the west coast of Mid‐Norway where significant influx of Atlantic Water produces a rich and complex physical–biological coupling, which is hard to measure and characterize due to the harsh environmental conditions. Results from both simulation and full‐scale sea trials are presented.     

A Threat Analysis of Human Bond Communications

In this paper we provide a high-level threat analysis of Human Bond Communications, using the STRIDE methodology. To this end, we provide an overview over Human Bond Communications and define a sample set of cases. The Human Bond Communications cases are such that the threats literally may be existential by nature. We also outline the STRIDE threat analysis methodology, and apply it to the sample set of cases previously defined. The threat analysis is carried out at a high abstraction level to highlight the major threats.

     

Use of local grid refinement and a Galerkin technique to study secondary migration in fractured and faulted regions

A simulator, which includes a full three dimensional, multi-component and three phase model for secondary oil migration is used to study flow through fractured and faulted regions. A control volume discretization is used to discretize the strongly coupled system of partial differential equations the model creates. Non-regular and non-matching local grid refinement (LGR) is used in critical areas to ensure the required accuracy. Two solution methods for solving the composite problem LGR create are studied. The simplest one uses the GMRES solver directly on the composite problem. The second method splits the composite problem into one coarse problem and one problem for each refined area. This method is a two level multigrid method which is based on a Galerkin technique. The CPU time and the number of iteration needed for convergence in both methods are presented and compared. Received: 23 February 1999 / Accepted: 17 June 1999     

熔盐电解精炼提纯金属硅(英文)

对熔盐电解质中硅的沉积过程进行电化学研究。在 973~223K,在硅氯化物熔盐中采用电解精炼提纯金属硅。结果表明,液态硅铜合金阳极有利于 CaCl2-NaCl-CaO-Si 熔盐体系的电解精炼。ICP-AES 分析结果显示,通过电解精炼可有效去除原料中大量的钛、铝、铁等金属杂质,硅中的硼和磷含量分别由 36×106和 25×106降低至 4.6×10 6和 2.8×10 6,电解能耗约为 9.3 kW·h/kg。     

Unexplained site variance in machine strength grading of Norway spruce structural timber

The aim of the study was to assess site effects in terms of unexplained site variance in machine strength grading of Norway spruce structural timber. The site effects were estimated for grading based on axial resonance frequency and timber length, and for grading based on dynamic modulus of elasticity. Timber was collected from 14 sites in Norway, and linear mixed models were developed based on 1188 boards. The study showed that strength grading based on axial resonance frequency and timber length leaves out effects of site that are related to altitude, latitude and site index. The variance could be reduced when the grading was based on dynamic modulus of elasticity. For both grading methods, the site effects were smaller for bending strength than for modulus of elasticity and density. Major parts of the site effects were explained by mass density, and simulations showed that it is possible to fulfil the requirements of the strength classes with a higher yield when the sorting is based on a combination of exclusion by mass density and exclusion by the frequency-based indicating property.     

Conductivity enhancement in carbon nanocone adhesive by electric field induced formation of aligned assemblies

We show how an alternating electric field can be used to assemble carbon nanocones (CNCs) and align these assemblies into microscopic wires in a commercial two-component adhesive. The wires form continuous pathways that may electrically connect the alignment electrodes, which leads to directional conductivity (～10(-3) S/m) on a macroscopic scale. This procedure leads to conductivity enhancement of at least 2-3 orders of magnitude in the case where the CNC fraction (～0.2 vol %) is 1 order of magnitude below the percolation threshold (～2 vol %). The alignment and conductivity are maintained on curing that joins the alignment electrodes permanently together. If the aligned CNC wires are damaged before curing, they can be realigned by an extended alignment period. This concept has implications in areas such as electronic packaging technology.     

Circumpolar study of perfluoroalkyl contaminants in polar bears (Ursus maritimus)

Perfluoroalkyl substances were determined in liver tissues and blood of polar bears (Ursus maritimus) from five locations in the North American Arctic and two locations in the European Arctic. Concentrations of perfluorooctane sulfonate (PFOS), perfluorohexane sulfonate, heptadecafluorooctane sulfonamide, and perfluoroalkyl carboxylates with C(8)-C(15) perfluorinated carbon chains were determined using liquid chromatography tandem mass spectrometry. PFOS concentrations were significantly correlated with age at four of seven sampling locations, while gender was not correlated to concentration for any compound measured. Populations in South Hudson Bay (2000-2730 ng/g wet wt), East Greenland (911-2140 ng/g wet wt), and Svalbard (756-1290 ng/g wet wt) had significantly (P < 0.05) higher PFOS concentrations than western populations such as the Chukchi Sea (435-729 ng/g wet wt). Concentrations of perfluorocarboxylic acids (PFCAs) with adjacent chain lengths (i.e., C9:C10 and C10:C11) were significantly correlated (P < 0.05), suggesting PFCAs have a common source within a location, but there were differences in proportions of PFCAs between eastern and western location sources. Concentrations of PFOS in liver tissue at five locations were correlated with concentrations of four polychlorinated biphenyl congeners (180, 153, 138, and 99) in adipose tissue of bears in the same populations, suggesting similar transport pathways and source regions of PFOS or precursors.     

Measurements of OVOCs and NMHCs in a Swiss highway tunnel for estimation of road transport emissions

Eighteen oxygenated volatile organic compounds (OVOCs) and eight nonmethane hydrocarbons (NMHCs) were measured continuously during a two-week campaign in 2004 in the Gubrist highway tunnel (Switzerland). The study aimed to estimate selected OVOC and NMHC emissions of the current vehicle fleet under highway conditions. For the measured OVOCs the highest EFs were found for ethanol (9.7 mg/km), isopropanol (3.2 mg/km), and acetaldehyde (2.5 mg/km), followed by acetone, benzaldehyde, and acrolein. Formaldehyde, the most abundant OVOC measured in other studies, was not measured by the method applied. Relative emissions of the measured OVOCs were estimated to contribute approximately 6 and 4% to the total road traffic VOC emissions from Switzerland and Europe, respectively. Results are compared with those from previous studies from the same tunnel performed in 1993 and 2002, and from campaigns in other tunnels. A continuous reduction in the emission factors (EFs) was determined for all measured compounds from 1993 until 2004. The relative contributions of light-duty vehicles (LDV) and heavy-duty vehicles (HDV) to the total emissions indicated that OVOCs were mainly produced by the HDVs, whereas LDVs dominated the production of the NMHCs.