How do we measure and improve the quality of a hierarchical ontology?

Hierarchical ontologies enable organising information in a human-machine understandable form, but constructing them for reuse and maintainability remains difficult. Often supporting tools available lack formal methodological underpinning and their developers are not supported by any concomitant metrics. The paper presents a formal underpinning to provide quality metrics of a taxonomy hierarchical ontology and proposes a methodology for semi-automatic building of maintainable taxonomies. Users provide terms to be used to describe different ontological elements as well as their attributes and their ranges of values. The methodology uses the formalised metrics to assess the quality of the users input and proposes changes according to given quality constraints. The paper illustrates the metrics and the methodology in constructing and repairing two medium size well-known taxonomies.     

Development of a peer-to-peer information sharing system using ontologies

Most existing agent-oriented methodologies ignore system extensibility, interoperability and reusability issues. Ontologies have been found to play a significant role in facilitating interoperability, reusability, MAS development activities (including MAS analysis and agent knowledge modeling) and MAS run-time operation (including agent communication and reasoning). However, most of the existing AOSE methodologies do not provide support for ontology-based MAS development. We present software engineering requirements for ontology-based development for MAS and examine an existing methodology, MOBMAS – a “Methodology for Ontology-Based MASs”, which makes use of ontologies as a modeling tool. In this examination, we highlight how MOBMAS can be extended to utilizing ontology roles in facilitating interoperability, reusability and verification. This will be based on using MOBMAS to develop peer-to-peer (P2P) community-based information sharing application which lead us to identify ontology related steps that can be added to enhance MOBMAS. MOBMAS is used by two experienced software developers who were not authors of the methodology, to guide the development of the P2P application.     

Determination of aliphatic hydrocarbons in urban runoff samples from the "Le Marais" experimental catchment in Paris centre

Aliphatic hydrocarbons were assessed in runoff and waste waters from an urban catchment located in Paris. Runoff were sampled from different types of urban surfaces (11 roofs representing four different covering materials, two courtyards and six streets). Waste water samples were collected at the catchment outlet during dry and wet weather periods as well. This paper gives an overview of the results on the concentration and distribution points of view for both the particulate and the dissolved phases. Results were discussed on the basis of the median. Accordingly, the temporal variability was taken into account. Thus, the concentration medians ranged from 345 to 827, from 297 to 790, and from 393 to 1,359 microg L(-1) in the roof, courtyard and street samples, respectively. The levels found at the catchment outlet during dry and wet weather periods were of the same order of magnitude, i.e. 700 microgL(-1). The particulate phase represented 85% of the total aliphatic hydrocarbon content whatever the sample.     

Validation of a modified material model for use with shell elements to improve the predictive accuracy of the thickness distribution in superplastic forming of sheet metals

The automotive industry has recently begun using the superplastic forming (SPF) process to fabricate complex aluminum and magnesium alloy panels that cannot be formed at room temperature due to insufficient formability. One of the manufacturing problems encountered during SPF is excessive thinning in the form of a localized neck; which can lead to fracture. Localized necking can be predicted with the use of continuum elements in finite element analysis (FEA); however, the use of these elements in simulating SPF of large automotive panels is computationally intensive and often computationally prohibitive due to convergence issues. This paper examines the use of a modified material model (developed by engineers at Livermore Software Technology Corporation (LSTC) that can be used with conventional Belytschko-Tsay shell elements. This model considers normal stresses during SPF, which is needed to predict necking locations. The paper reports the results on investigating means for improving computational efficiency with this new formulation (i.e. element size, mass scaling, and adaptive meshing) and compares the performance of the normal stress element formulation with that of Belytschko-Tsay shell element in simulating the SPF process. The findings indicate that the newly developed formulation can be used for predicting localized thinning under SPF conditions.     

Impact of surrounding tissue on conductance measurement of coronary and peripheral lumen area

Parallel conductance (electric current flow through surrounding tissue) is an important determinant of accurate measurements of arterial lumen diameter, using the conductance method. The present study is focused on the role of non-uniform geometrical/electrical configurations of surrounding tissue, which are a primary source of electric current leakage. Computational models were constructed to simulate the conductance catheter measurement with two different excitation electrodes spacings (i.e. 12 and 20 mm for coronary and peripheral sizing, respectively) for different vessel–tissue configurations: (i) blood vessel fully embedded in muscle tissue, (ii) blood vessel superficially embedded in muscle tissue, and (iii) blood vessel superficially embedded in muscle tissue with fat covering half of the arterial vessel (anterior portion). The simulations suggest that the parallel conductance and accuracy of measurement is dependent on the inhomogeneous/anisotropic configuration of surrounding tissue, including the asymmetric dimension and anisotropy in electrical conductivity of surrounding tissue. Specifically, the measurement was shown to be accurate as long as the vessel was superficial, regardless of the considerable total surrounding tissue dimension for coronary or peripheral arteries. Moreover, it was shown that the unfavourable impact of parallel conductance on the accuracy of conductance catheter measurement is decreased by the combination of a lower transverse electrical conductivity of surrounding muscle tissue, a smaller electrode spacing and a larger lumen diameter. The present findings confirm that the conductance catheter technique provides an accurate platform for sizing of clinically relevant (i.e. superficial and diseased) arteries.     

Black Carbon Measurement using Laser Integrating Plate Method

An intensive study to test and validate the Laser Integrating Plate Method (LIPM) of determining absorption coefficient and black carbon mass was carried out. Measurements by LIPM were compared to Smoke Stain Reflectometer measurements and Mie calculations based on accelerator ion beam analysis (IBA) elemental composition measurements. Results show that the value of mass absorption coefficient ? = 10 m²g^{? 1} previously used for mass determination, and widely accepted for black carbon generated by combustion processes, is an inappropriate choice for the type of carbon measured in Sydney. A value of ? = 7 m²g^?1 for soot and ambient aerosol particles was found to be more appropriate.     

Iterative Decoding and Soft Interference Cancellation for the Gaussian Multiple Access Channel

For the Gaussian multiple access channel, we studied a joint channel decoderand multiple access interference canceller. For each user, the decoderoutput was used to generate a soft estimate of the user signal. Theestimate was improved by iterating decoding and cancellation untilconvergence was reached. A final, hard decoding was then performed.Simulation results are presented.     

Roughened glass slides and a spectrophotometer for the detection of the wavelength-dependent refractive index of transparent liquids

We describe a method to determine the wavelength-dependent refractive index of liquids by measurement of light transmittance with a spectrophotometer. The method is based on using roughened glass slides with different a priori known refractive indices and immersing the slides into the transparent liquid with unknown refractive index. Using the dispersion data on the glass material it is possible to find the index match between the liquid and the glass slide, and hence the refractive index of the liquid.     

陆上地震技术新进展

先进的地震采集和处理技术已经应用于陆上。一种高保真度、高分辨率集成式单传感器系统目前已在陆上使用。该技术的出现标志着在勘探、开发和生产应用方面取得了重大进展。     

Direct photolithographic deforming of organomodified siloxane films for micro-optics fabrication

Direct photolithographic deforming of hybrid glass films is used to fabricate optical structures. The structure is fabricated in polyethylene-oxide-acrylate modified hybrid glass films with (1) binary and gray-scale photomasks using a mercury UV-lamp exposure and (2) maskless UV-laser patterning. Fabrication of isolated lenslets, lens arrays, and gratings is presented, including the associated exposure patterns. The hybrid glass material yields light-induced deformation peak-to-valley (p.v.) heights up to 12.8 microm with mercury UV-lamp exposure and p.v. deformation heights up to 6.8 microm with 365-nm UV-laser exposure. The fabricated lenslets' surface data are presented as Zernike-polynomial fit coefficients. Material synthesis and processing-related aspects are examined to understand and control the material's deformation under exposure. The hybrid glass material exhibits a maximum spectral extinction coefficient of 1.6 x 10(-3) microm(-1) at wavelengths ranging from 450 to 2,200 nm and has a refractive index of 1.52 at 632.8 nm. The fabricated structures exhibit rms surface roughness between 1 and 5 nm.