Novel approaches to developing carbon nanotube based polymer composites: fundamental studies and nanotech applications

The adsorption of several types of conducting polymers on carbon nanotubes is investigated by electrical transport measurements. We report the optoelectronic properties occurring in single-walled carbon nanotubes (SWNTs) conjugated polymer, poly(3-octylthiophene), composites. Al/polymer-nanotube composite/indium-tin oxide diodes show photovoltaic behavior proposing that the main reason for this increase is the photoinduced electron transfer at the polymer/nanotube interface. Interesting results were obtained in the case of poly(o-anisidine) (POAS)-multi-walled nanotubes (MWNTs) composites where the increment of monolayers results in a significant improvement of the specific conductivity. POAS-coated MWNTs thin films demonstrated their potentiality as a new class of materials for inorganic vapors detection for environmental applications.     

Solvent and oxygen effects on the free radical polymerization of 6-O-vinyladipoyl-d-glucopyranose

The vinyl ester-type glycomonomer 6-O-vinyladipoyl-d-glucopyranose was polymerized in water and alcohol solutions. In all cases, long polymerization times were necessary to achieve reasonable conversions. Depending on the nature of the solvent, polydisperse glycopolymers were obtained possessing a molecular weight ranging between 10,000 and 122,000 Da (PS equivalent). Higher alcohols appeared to act as chain transfer agents and oligomers with DP_n between 2 and 6 were indeed obtained when 2-propanol was the solvent. Also, thorough oxygen removal from the reaction mixture proved to be essential for the success of the experiment, plain nitrogen sparging being ineffective in most cases.     

Learning control in spatial coordinates for the path-following of autonomous vehicles

We prove the existence of a P-type (proportional-type) space-learning control, which, on the basis of a kinematic third order nonlinear model of an autonomous nonholonomic vehicle and by a proper choice of the proportional control gain, guarantees asymptotic tracking of planar curves whose uncertain curvature is L$L$-periodic in the curvilinear abscissa. The behavior of a human driver, who repetitively learns the correct action from the past experience in the space, is mathematically reproduced. A stability analysis is presented while simulation results demonstrate the effectiveness of the presented approach.     

Network Externalities,Incumbent’s Competitive Advantage and the Degree of Openness of Software Start-Ups

This paper proposes a formal model that analyzes the degree of openness chosen by start-ups when entering the software industry. In line with the literature, we label as degree of openness the extent to which software start-ups mix open source (OS) and proprietary solutions in the portfolio of software products they offer. We relate the choice of the degree of openness to two key characteristics of the market segments in which software start-ups operate: the strength of the network externalities and the competitive advantage of the incumbent. Specifically, by modelling (price) competition between an incumbent and an entrant in two ways, i.e., the entrant is price-setter or price-taker, we derive the necessary condition(s) in terms of the strength of network externalities for observing the adoption of a business model that comprises the offering of both proprietary and OS solutions by the entrant (i.e., hybrid business model). Then, we highlight that, if a hybrid business model is the choice, the degree of openness chosen in equilibrium increases along with both the strength of the network externalities and the competitive advantage of the incumbent. This result holds indifferently whether the software start-up is modelled as a price-setter or a price-taker. An empirical test run on a sample of European start-ups in the software industry supports these theoretical predictions.     

Information Sharing Among Disaster Responders - An Interactive Spreadsheet-Based Collaboration Approach

Recent natural disasters have led crisis management organizations to revise their protocols so as to rely on the contribution of a wider range of actors, including simple citizens as well as expert operators, to support decision making activities. Reliable and timely information sharing among members of distributed teams of disaster responders has become paramount for the success of the overall crisis management process. In this paper we propose a crisis management system based on spreadsheet-mediated collaboration among on-site responders and decision makers. To share data a common spreadsheet artifact has been developed by using a participatory design approach which is accessed through mobile user interfaces. The evaluation results showed that the use of the spreadsheet artifact has resulted in more effective decision making relating to set of earthquake management scenarios in high-risk areas located in Italy.     

Synthesis and characterization of epoxidized styrene–butadiene rubber/silicon dioxide hybrid materials

Hybrid materials were synthesized from epoxidized (68, 43, or 14%) styrene–butadiene rubber (SBR) and the hydrolysis product of tetraethoxysilane (TEOS) in situ under ultrasonic irradiation. The products were characterized with thermal analysis (differential scanning calorimetry and thermogravimetric analysis), stress–strain tests, scanning electron microscopy (including energy‐dispersive spectrometry), and swelling in tetrahydrofuran and water. The most transparent were those prepared from SBR with the highest degree of epoxidation, whereas those obtained from less epoxidized SBR and with larger amounts of TEOS showed distinct phases that could be considered two hybrid phases (one rich in TEOS and another rich in SBR). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 798–803, 2004     

Cold sintering of diatomaceous earth

Diatomite, a natural silicate-based sedimentary rock, was densified by cold sintering at room temperature and 150°C under various pressures (100, 200, and 300 MPa) and using different NaOH water solutions (0–3 M). The relative density of cold sintered diatomite can be as high as 90%, a condition that can be achieved by conventional firing only at 1200–1300°C. The cold sintered materials maintain the same mineralogical composition of the starting powder (quartz, glass, and illite) and are constituted by well-deformed and flattened grains oriented orthogonally to the applied pressure. Conversely, an evident phase evolution takes place upon conventional firing with the formation of cristobalite and mullite. The bending strength of cold sintered artifacts can exceed 40 MPa and increases to ≈80 MPa after post-annealing at 800°C, such mechanical strength is much larger than that of conventionally pressed samples sintered at 800°C, which is only ≈1 MPa.     

Evaluation of the salt leaching method for the production of ethylene propylene diene monomer rubber foams

The thermomechanical behavior of ethylene propylene diene monomer (EPDM) foams produced with the salt leaching method has been investigated and compared with the behavior of EPDM foams obtained from conventional blowing agents. Moreover, the salt-leaching process has been optimized to minimize salt residues and the influence of different parameters (such as average particle size and particle size distribution) has been investigated. Scanning electron microscopy and density measurements highlighted that salt-leaching leads to the formation of open-cell porosity with cell dimensions of around 60 to 80 μm, while foams obtained with the two traditional foaming agents lead to closed-cell porosity. Compression set values indicate that the behavior of the foams produced with salt leaching are more similar to the unfoamed rubber, characterized by higher elasticity and low residual deformation. Two theoretical models were successfully applied to the compression curves (Mooney-Rivlin and Exponential-Logarithmic) and they highlighted the effect of foaming on the properties of EPDM rubber and in particular the higher chain extensibility obtained through the salt leaching foaming method.