Experiments on semantic interoperability of agent reputation models using the SOARI architecture

In the last decades, we have experienced a rapid increase in the number of available online e-services. Agent-based computing has been advocated as a natural computational model to automate the interaction with those services, thus enabling the formation of multiagent systems. In these latter, agents may use trust and reputation as the main control mechanism and they usually exchange such information in order to accelerate reputation evaluation. However, due to the semantic heterogeneity of the different reputation models, agents interaction about reputation has to deal with interoperability issues. Therefore, this paper presents some experiments using SOARI, an architecture that enables the semantic interoperability among agents that have heterogeneous reputation models. Such experiments were conducted using two reputation testbeds and three agent reputation models in order to analyze the accuracy of the agents reputation evaluation in the presence of a more expressive communication apparatus, as well as the effect of the heterogeneity among reputation models on this accuracy.     

Multi-criteria analysis for the selection of space heating systems in an industrial building

Decisions on space heating of industrial buildings involve several conflicting objectives and solutions prospected by economic optimization (e.g. life cycle cost minimization) models may be far from the real preferences of decision makers. To overcome this limit, multi-criteria decision analysis which has hardly been used at single building level, especially in industrial contexts, could be a helpful methodology. This paper presents the application of a well-known multi-criteria approach, the Analytic Hierarchy Process (AHP), to the selection of space heating systems for an industrial building. We discuss the technologies available for industrial heating, criteria elicited from the decision maker and the ranking of alternatives identified with our AHP model. As very little is reported in literature about industrial energy system choices, our study, although focused on an individual case, may shed some light on decision making in this sector. To this end, we also compare our results with evidence on residential heating systems choices derived from literature. Investment costs are the most important criterion for industry, whereas qualitative attributes and operational costs are most important for homes. Qualitative attributes also significantly affect industrial heating system choices and, as the AHP is particularly effective in handling these aspects, we suggest it could be used for tactical energy planning models.     

Can intergranular force transmission be identified in sand?

This work tackles the challenge of assessment of force distributions in granular media. Spatially resolved neutron and x-ray diffraction are used to measure internal strains of sand grains under load. These approaches are sensitive to the crystallographic strains of the sand grains (quartz crystals) such that each grain acts as a local 3D strain gauge and so, for elastic deformations, a force gauge. First results are presented from recent experiments that provide tantalising indications of the potential of these techniques in the investigation of the mechanics of granular media.     

A single-channel implantable microstimulator for functional neuromuscular stimulation

This paper describes a single-channel implantable microstimulator for functional neuromuscular stimulation. This device measures 2 x 2 x 10 mm3 and can be inserted into paralyzed muscle groups by expulsion from a hypodermic needle. Power and data to the device are supplied from outside by RF telemetry using an amplitude-modulated 2-MHz RF carrier generated using a high-efficiency class-E transmitter. The transmitted signal carries a 5-b address which selects one of the 32 possible microstimulators. The selected device then delivers up to 2 microC of charge store in a tantalum chip capacitor for up to 200 microseconds (10 mA) into loads of < 800 omega through a high-current thin-film iridium-oxide (IrOx) electrode (approximately 0.3 mm2 in area). A bi-CMOS receiver circuitry is used to: generate two regulated voltage supplies (4.5 and 9 V), recover a 2-MHz clock from the carrier, demodulate the address code, and activate the output current delivery circuitry upon the reception of an external command. The overall power dissipation of the receiver circuitry is 45-55 mW. The implant is hermetically packaged using a custom-made glass capsule.     

A round-robin programme on interfacial test methods

A round-robin programme has been undertaken to assess the compatibility in the micromechanical techniques used to evaluate the interfacial shear strength of the fibre/matrix bond in composite materials. The tests selected for evaluation were the single-fibre pull-out test, the microdebond test, the fragmentation test and the micro-indentation test. Twelve laboratories were invited to participate in this programme. Each laboratory was supplied with Caurtaulds XA fibre in the untreated condition and with a standard surface treatment, and a quantity of epoxy resin, hardener and catalyst, all from the same batch. Some laboratories were supplied with composite bars made with the same materials. A common cure cycle was chosen for sample preparation. Each laboratory conducted the tests to its own procedures. The results showed that the scatter within each laboratory was acceptable but the scatter between laboratories for a particular test was high. The results are discussed and possible explanations are presented for these observations. The indications are that the fundamental procedures used in each laboratory are sound. The results also suggest that there is great potential for achieving standard procedures and reducing the inter-laboratory scatter. A further round-robin programme is proposed to generate test protocols.     

The European contribution to the development and validation activities for the design of IFMIF lithium facility

The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-driven intense neutron source where candidate materials for fusion reactors will be tested and validated. The high energy neutron flux is produced by means of two deuteron beams (total current of 250 mA, energy of 40 MeV) that strikes a liquid lithium target circulating in a lithium loop of IFMIF plant. The European (EU) contribution to the development of the lithium facility comprises five procurement packages, as follow: (1) participation to the experimental activities of the EVEDA lithium test loop in Oarai (Japan); (2) study aimed at evaluating the corrosion and erosion phenomena, promoted by lithium, for structural fusion reference materials like AISI 316L and Eurofer; (3) design and validation of the lithium purification method with the aim to provide input data for the design of the purification system of IFIMF lithium loop; (4) design and validation of the remote handling (RH) procedures for the refurbishment/replacement of the EU concept of IFMIF target assembly including the design of the remote handling tools; (5) the engineering design of the European target assembly for IFMIF and the safety and RAMI analyses for the entire IFMIF lithium facility.The paper gives an overview of the status of the activities and of the main outcomes achieved so far.     

Modification of the Carbon Fiber Surface by Oxygen Plasma and its Influence on Adhesion Strength in Acrylate-Based Composites Cured by Electron Beam and Ultra Violet Light

Oxygen plasma was used to modify the surface properties of carbon fibers and their adhesion strength with an acrylate resin cured by electron beam. A characterization of the surface topography and the surface chemistry was carried out (topography at a micrometric and nanometric scale, specific surface area, temperature programmed desorption, and X-ray photoelectron spectroscopy). The topography remained unchanged. Regarding the surface chemistry, carboxylic acids, alcohols, lactones, and ethers were created and their location was at the outer surface of the fibers. A pull-out test was used to measure the adhesion strength with the acrylate resin cured by electron beam. For comparison, an isothermal UV curing was also investigated. The value of the interfacial shear strength was increased only in the case of UV curing. No improvement was observed with electron beam curing, which highlighted the generation of an interphase, the mechanical properties of which are dependent on the processing conditions.     

Ketogenic diet-fed rats have increased fat mass and phosphoenolpyruvate carboxykinase activity

The ketogenic diet (KD), characterized by high fat and low carbohydrate and protein contents, has been proposed to be beneficial in children with epilepsy disorders not helped by conventional anti-epileptic drug treatment. Weight loss and inadequate growth is an important drawback of this diet and metabolic causes are not well characterized. The aim of this study was to examine body weight variation during KD feeding for 6 wk of Wistar rats; fat mass and adipocyte cytosolic phosphoenolpyruvate carboxykinase (PEPCK) activity were also observed. PEPCK activity was determined based on the [H(14)CO(3) (-)]-oxaloacetate exchange reaction. KD-fed rats gained weight at a less rapid rate than normal-fed rats, but with a significant increment in fat mass. The fat mass/body weight ratio already differed between ketogenic and control rats after the first week of treatment, and was 2.4 x higher in ketogenic rats. The visceral lipogenesis was supported by an increment in adipocyte PEPCK, aiming to provide glycerol 3-phosphate to triacylglycerol synthesis and this fat accumulation was accompanied by glucose intolerance. These data contribute to our understanding of the metabolic effects of the KD in adipose tissue and liver and suggest some potential risks of this diet, particularly visceral fat accumulation.     

Status of engineering design of liquid lithium target in IFMIF-EVEDA

In International Fusion Materials Irradiation Facility (IFMIF), intense neutron flux (4.5 × 10¹⁷ n/m² s) with a peak energy of 14 MeV are produced by means of two deuteron beams with a total current of 250 mA and maximum energy of 40 MeV that strike a liquid Li target circulating in a Li loop. Major design requirement is to provide a stable Li jet at a speed of 10–20 m/s with a surface wave amplitude on the Li flow less than 1 mm for handling of an averaged heat flux of 1 GW/m² under a continuous 10 MW deuterium beam deposition. The target system consists of a target assembly, a replaceable back-plate, a Li main loop and a Li purification loop. In July 2007, Engineering Validation and Engineering Design Activities (EVEDA) started under Broader Approach. In this paper, status of the engineering design of the IFMIF Li target system performed in 2007/2008 is described. The future EVEDA tasks to develop the target system are also summarized.