Wood inspection with non-supervised clustering

Abstract. The appearance of sawn timber has huge natural variations that the human inspector easily compensates for mentally when determining the types of defects and the grade of each board. However, for automatic wood inspection systems these variations are a major source for complication. This makes it difficult to use textbook methodologies for visual inspection. These methodologies generally aim at systems that are trained in a supervised manner with samples of defects and good material, but selecting and labeling the samples is an error-prone process that limits the accuracy that can be achieved. We present a non-supervised clustering-based approach for detecting and recognizing defects in lumber boards. A key idea is to employ a self-organizing map (SOM) for discriminating between sound wood and defects. Human involvement needed for training is minimal. The approach has been tested with color images of lumber boards, and the achieved false detection and error escape rates are low. The approach also provides a self-intuitive visual user interface. Received: 16 December 2000 / Accepted: 8 December 2001 Correspondence to: O. Silvén     

Apatite as an interesting seed to remove phosphorus from wastewater in constructed wetlands.

Intensive use of phosphates has resulted in high P levels in surface waters and therefore eutrophication problems. Over the last decade many studies have revealed the advantage of using specific materials with efficient phosphorus retention capacities. Recent studies state that Ca materials are of particular interest for long-term retention of P, but can induce negative effects. To improve P retention and avoid negative counter-effects we tested the potential of natural apatites. Apatite sorption was evaluated using batch and open reactor experiments. Batch experiments identify sorption mechanisms and the influence of the ionic characteristics of the solution; open reactor experiments evaluate sorption capacities in relation to the ionic composition of the solution and biomass development. In parallel, observation of the material by electron microscopy was used to give more precision information about the mechanisms involved. This work reveals the strong chemical affinity between apatites and phosphorus. Compared to other calcareous materials apatite is better able to maintain low outlet P levels. After more than 550 days feeding, sorption was still present and low P outlet levels were still being obtained when sufficient contact time and calcium content in the solution were ensured. This work demonstrates the advantages of using apatites for phosphorus removal in constructed wetlands. The behaviour of apatite in phosphorus retention is explained and its suitability for use in such extensive systems defined.     

Oil yield and compressibility modeling during microscale expression: Criteria for linseed breeding

Seven linseed varieties were harvested at seven times before complete maturity. Microscale oilseed expressions were subsequently carried out on it. A pressure of 10 MPa was applied for 1 h under uniaxial stress. The results were characterized in terms of oil, water and mucilage content, harvest date and oil yield. The piston displacement versus time (creep curves) was described by a four‐Kelvin‐Voigt elements viscoelastic model. Parameters were derived from the model, such as the mechanical properties of seeds (compressibility moduli), showing that the viscoelastic model fits well the experimental data (R² ≈ 0.999). The modeling parameters were combined with some biochemical data in order to predict the kinetics of oil extraction.     

Spectral color reproduction minimizing spectral and perceptual color differences

In this article, we are combining minimization criteria in the colorant separation process for spectral color reproduction. The colorant separation is performed by inverting a spectral printer model: the spectral Yule‐Nielsen modified Neugebauer model. The inversion of the spectral printer model is an optimization operation in which a criterion is minimized at each iteration. The approach we proposed minimizes a criterion defined by the weighted sum of a spectral difference and a perceptual color difference. The weights can be tuned with a parameter α ∞ [0, 1]. Our goal is to decrease the spectral difference between the original data and its reproduction and also to consider perceptual color difference under different illuminant conditions. In order to find the best α value, we initially compare a pure colorimetric criterion and a pure spectral criterion for the reproduction, then we combine them. We perform four colorant separations: the first separation will minimize the 1976 CIELAB color difference where four illuminants are tested, the second separation will minimize an equally weighted summation of 1976 CIELAB color difference with the four illuminants tested independently, the third colorant separation will minimize a spectral difference, and the fourth colorant separation will combine a weighted sum of a spectral difference and one of the two first colorimetric differences previously introduced. This last colorant separation can be tuned with a parameter in order to emphasize on spectral or colorimetric difference. We use a six colorants printer with artificial inks for our experiments. The prints are simulated by the spectral Yule‐Nielsen modified Neugebauer model. Two groups of data are used for our experiments. The first group describes the data printed by our printing system, which is represented by a regular grid in colorant space of the printer and the second group describes the data which is not originally produced by our printing system but mapped to the spectral printer gamut. The Esser test chart and the Macbeth Color Checker test chart have been selected for the second group. Spectral gamut mapping of this data is carried out before performing colorant separation. Our results show improvement for the colorant separations combining a sum of 1976 CIELAB color difference for a set of illuminants and for the colorant separation combining a sum of 1976 CIELAB color difference and spectral difference, especially in the case of spectral data originally produced by the printer. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 494–504, 2008     

Karyotype description of Pomacea patula catemacensis (Caenogastropoda, Ampullariidae), with an assessment of the taxonomic status of Pomacea patula.

Mitotic chromosomes of the freshwater snail Pomacea patula catemacensis (Baker 1922) were analyzed on gill tissue of specimens from the type locality (Lake Catemaco, Mexico). The diploid number of chromosomes is 2n = 26, including nine metacentric and four submetacentric pairs; therefore, the fundamental number is FN = 52, No sex chromosomes could be identified. The same chromosome number and morphology were already reported for P. flagellata, i.e., the other species of the genus living in Mexico. The basic haploid number for family Ampullariidae was reported to be n = 14 in the literature; so, its reduction to n = 13 is probably an apomorphy of the Mexican Pomacea snails. Lanistes bolteni, from Egypt, also shows n = 13, but its karyotype is much more asymmetrical, and seems to have evolved independently from P. flagellata and P. patula catemacensis. The nominotypical subspecies, P. patula patula (Reeve 1856), is a poorly known taxon, whose original locality is unknown. A taxonomical account is presented here, and a Mexican origin postulated as the most parsimonious hypothesis.     

Computations of Explosive Boiling in Microgravity

Dynamics of the explosive growth of a vapor bubble in microgravity is investigated by direct numerical simulation. A front tracking/finite difference technique is used to solve for the velocity and the temperature field in both phases and to account for inertia, viscosity, and surface deformation. The method is validated by comparison of the numerical results with the available analytical formulations such as the evaporation of a one-dimensional liquid/vapor interface, frequency of oscillations of capillary waves, and other numerical results. Evolution of a three-dimensional vapor nucleus during explosive boiling is followed and a fine scale structure similar to experimental results is observed. Two-dimensional simulations yield a similar qualitative instability growth.     

"The association between emotional upset and cardiac arrhythmia during daily life": Correction to Carels et al. (2003).

Reports an error in the original article by R. A. Carels et al (Journal of Consulting & Clinical Psychology, 2003[Jun], Vol 71[3], 613-618). On page 615, Lines 18, 20, 22, of Table 1, the data in the rows that read "Tachycardia in min per hr," "Repetitive PVCs per hr," and "PVCs per hr" are incorrectly reported in the n and % columns. They should have been reported in the M and SD columns. The corrected table is provided. (The following abstract of this article originally appeared in record 2003-00756-023.) Ventricular arrhythmia exhibits considerable within-subject variability that cannot be attributed to clinical status alone. This investigation examined the extent to which cardiac arrhythmia was associated with psychological and physical factors assessed during the hour preceding arrhythmic or nonarrhythmic activity. Approximately twice hourly, 46 patients randomly completed a diary assessing mood and physical symptoms during 24-hr electrocardiographic monitoring. Greater negative emotion was associated with increased arrhythmia. Additionally, greater negative emotion was significantly associated with increased arrhythmia among participants in a low left ventricular ejection fraction group (LVEF). However, this relationship between negative emotion and arrhythmia was not... (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Dissolved oxygen control of the activated sludge wastewater treatment process using model predictive control

Activated sludge wastewater treatment processes are difficult to be controlled because of their complex and nonlinear behavior, however, the control of the dissolved oxygen level in the reactors plays an important role in the operation of the facility. For this reason a new approach is studied in this paper using simulated case-study approach: model predictive control (MPC) has been applied to control the dissolved oxygen concentration in an aerobic reactor of a wastewater treatment plant. The control strategy is investigated and evaluated on two examples using systematic evaluation criteria: in a simulation benchmark – developed for the evaluation of different control strategies – the oxygen concentration has to be maintained at a given level in an aerobic basin; and a changing oxygen concentration in an alternating activated sludge process is controlled using MPC technique. The effect of some MPC tuning parameters (prediction horizon, input weight, sampling time) are also investigated. The results show that MPC can be effectively used for dissolved oxygen control in wastewater treatment plants.