Effect of CO<Subscript>2</Subscript> addition on lignite gasification in a CFB reactor: A pilot-scale study

The addition of carbon dioxide to the gasification media during lignite gasification is introduced. The paper presents thermodynamic grounds of CO₂ enhanced gasification using a simplified equilibrium model. Experimental tests conducted using a pilot-scale circulating fluidized bed gasifier are discussed. Detailed analysis of the CO₂/C ratio on process conditions, namely on the process gas composition, lower heating value and H₂/CO ratio, is provided. Process gas composition implies that the gas is suitable for heat and power generation. Alternatively, CO₂ enhanced gasification could be considered as a carbon capture and utilization technology when external, renewable heat supply to the process is used. The results thus obtained are the initial step toward development of the CO₂ enhanced gasification process.     

Poly(methyl vinyl ether‐alt‐maleic anhydride) functionalized with 3‐aminophenylboronic acid: A new boronic acid polymer for sensing diols in neutral water

Amidation of poly(methyl vinyl ether‐alt‐maleic anhydride) with 3‐aminophenylboronic acid was used to prepare a new boronic acid polymer. The binding of catechol dye, Alizarin Red S to the polymer obtained resulted in getting a stable, colored sensor which was used to establish association constants with different diols in competitive assay. The binding of different diols was readily detected by color change and absorbance values measured at 450 nm were used to calculate the association constants. The polymer obtained formed high‐affinity complexes with ribonucleosides, particularly cytidine and uridine. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40778.     

Quantifying interface states and bulk defects in high‐efficiency solution‐processed small‐molecule solar cells by impedance and capacitance characteristics

The AC properties of high‐efficiency (η = 8.01% under standard 100 mW/cm² AM1.5 illumination) small‐molecule bulk heterojunction (SM BHJ) solar cells (p‐DTS(FBTTh₂)₂/PC₇₀BM) at different DC biases and frequencies of small amplitude (±10 mV) AC signal in the dark at room temperature were investigated in details. We showed the presence of interface states at the heterojunction interface and determined their parameters from the analysis of spectral distributions of real and imaginary components of the measured impedance. The dielectric constant of BHJ ε_BHJ = 2.9 was determined from the geometrical capacitance of totally depleted BHJ layer. We explained quantitatively the effect of interface states and series resistance on the measured C‐V characteristics of the SM BHJ solar cells at both low and high frequencies. The quantitative value of the density of defect states in the bulk N = 1.05 × 10¹⁶ cm⁻³ was determined from the high frequency C‐V characteristic corrected by the effect of the series resistance. Copyright © 2015 John Wiley & Sons, Ltd.     

Solvent effects on the rates and mechanisms of reaction of phenols with free radicals

The rates of formal abstraction of phenolic hydrogen atoms by free radicals, Y* + ArOH --> YH + ArO*, are profoundly influenced by the hydrogen-bond-accepting and anion-solvation abilities of solvents, by the electron affinities and reactivities (Y-H bond dissociation enthalpies) of radicals, and by the phenol's ring substituents. These apparently simple reactions can occur by at least three different, nonexclusive mechanisms: hydrogen atom transfer, proton-coupled electron transfer, and sequential proton-loss electron transfer. The delicate balance among these mechanisms depends on both the environment and the reactants. The main features of these mechanisms are described, together with some interesting kinetic consequences.     

Studies on dimerisation of tocopherols under the influence of methyl linoleate peroxides

The stability of plant oils is related to the level of polyunsaturated fatty acids and the presence of native antioxidants--especially tocopherols. During storage, lipids or the fat products undergo oxidation and tocopherol dimers and trimers are formed. These compounds possess reducing and antioxidant properties and participate in oxidation clearly inhibiting this process. In the present study, the correlation between levels of peroxides formed during autoxidation of methyl linoleate and simultaneous decomposition of tocopherols was examined. The peroxide value was investigated. Quantities of decomposed tocopherols and formation of their dimers were determined by high-performance liquid chromatography (HPLC). Mass spectrum analysis confirmed thatthe analysed compounds were dimes. Dimerisation of gamma-T begins at the smaller quantity of the methyl linoleate peroxides than dimerisation of delta-T. At the beginning of methyl linoleate autoxidation dimerisation of gamma-T in relation to its loss was smaller. The quantity of gamma-T dimers with ether bonds in total dimers pointed to faster binding of phenoxy radicals than transformation into the phenyl ones. delta-T dimers with phenyl bonds constitute about 65% of the total. The quantity of peroxides in methyl linoleate, necessary for quantitative and qualitative changes of homologous tocopherols, decreased from delta-T to alpha-T.     

Integrated three-dimensional shape and reflection properties measurement system

Creating accurate three-dimensional (3D) digitalized models of cultural heritage objects requires that information about surface geometry be integrated with measurements of other material properties like color and reflectance. Up until now, these measurements have been performed in laboratories using manually integrated (subjective) data analyses. We describe an out-of-laboratory bidirectional reflectance distribution function (BRDF) and 3D shape measurement system that implements shape and BRDF measurement in a single setup with BRDF uncertainty evaluation. The setup aligns spatial data with the angular reflectance distribution, yielding a better estimation of the surface's reflective properties by integrating these two modality measurements into one setup using a single detector. This approach provides a better picture of an object's intrinsic material features, which in turn produces a higher-quality digitalized model reconstruction. Furthermore, this system simplifies the data processing by combining structured light projection and photometric stereo. The results of our method of data analysis describe the diffusive and specular attributes corresponding to every measured geometric point and can be used to render intricate 3D models in an arbitrarily illuminated scene.     

Mechanisms of charge transport in anisotype <Emphasis Type="Italic">n</Emphasis>-TiO<Subscript>2</Subscript>/<Emphasis Type="Italic">p</Emphasis>-CdTe heterojunctions

Surface-barrier anisotype n-TiO₂/p-CdTe heterojunctions are fabricated by depositing thin titanium-dioxide films on a freshly cleaved surface of single-crystalline cadmium-telluride wafers by reactive magnetron sputtering. It is established that the electric current through the heterojunctions under investigation is formed by generation-recombination processes in the space-charge region via a deep energy level and tunneling through the potential barrier. The depth and nature of the impurity centers involved in the charge transport are determined.     

Magnetic-aligned,magnetite-filled epoxy composites with enhanced thermal conductivity

This paper investigates the influence of magnetic field-assisted filler alignment technology on the morphology and the thermal conductivity of magnetite-filled epoxy composites. A magnetic field was applied during the solidification of the composite in order to change the position of the filler and its distribution in the polymer matrix. It is shown that the applied procedure leads to the filler being oriented along the direction of the magnetic field, and as a result, the thermal conductivity is improved by up to 120 % compared to a composite with randomly oriented filler obtained without the assistance of a magnetic field. This positive effect is caused by the appearance of conductive paths at a much lower content of the filler when the composite solidification is assisted by a magnetic field, relative to an equivalent isotropic sample. These morphological changes were confirmed by microscopic and X-ray microtomography imaging. The temperature dependences of thermal conductivity were also investigated over a broad temperature range for a magnetite-filled epoxy composite sample and compared to the bulk magnetite reference, showing that thermal behaviour of the magnetite-filled composite is stable, which is a promising result when considering the future application of the technology.     

Electrical and optical properties of TiN thin films

TiN thin films have been grown by reactive magnetron sputtering. It has been shown that an Ohmic contact to TiN thin-film can be made from indium. The TiN thin films have been shown to be n-type semiconductors with a carrier concentration of 2.88 × 10²² cm^?3 and resistivity of ρ = 0.4 Ω cm at room temperature. The activation energy for conduction in the TiN films at temperatures in the range 295 K < T < 420 K is 0.15 eV. The optical properties of the TiN thin films have been investigated. The material of the TiN thin films has been shown to be a direct gap semiconductor with a band gap E _g = 3.4 eV.