The Mechanical Properties of the Novel Nanocrystalline Refractory Tantalum Alloys

Protection of Metals and Physical Chemistry of Surfaces - The nanocrystalline tantalum alloys were investigated in terms of mechanical properties. The materials were obtained by powder metallurgy...     

Evaluation of Damage Degree of Inconel 718 Alloy with the Use of Non-Destructive Methods

The article presents results of the investigation of the quantitative evaluation of the degree of damage, described by the measure of accumulated plastic strain obtained in a static tensile test, using selected non-destructive techniques. Inconel 718 alloy was tested. The tests were conducted using a new type of specimens of variable cross-sectional area of measuring part. This provided a continuous distribution of plastic strain in the gage part of the specimen. The permanent deformation that varies along the sample axis enables an analysis of damage induced by a plastic deformation. The proposed method enables replacing the series of specimens by one sample. Degradation of the alloy corresponds with the changes of the electromagnetic properties of the material—the phase angle of the complex impedance of the eddy current, as well as with acoustics properties of material—acoustic birefringence of ultrasonic waves. It allows to determine the degree of damage of the material using noninvasive, non-destructive methods. Using the damage parameter proposed by Johnson it is possible to obtain the correlation between the non-destructive results and a damage degree of the material. The presented testing method delivers information about changes in the material structure caused by permanent deformation.

     

Gas‐phase removal of indoor volatile organic compounds and airborne microorganisms over mono‐ and bimetal‐modified (Pt,Cu, Ag) titanium(IV) oxide nanocomposites

The photocatalytic deactivation of volatile organic compounds and mold fungi using TiO₂ modified with mono‐ and bimetallic (Pt, Cu, Ag) particles is reported in this study. The mono‐ and bimetal‐modified (Pt, Cu, Ag) titanium(IV) oxide photocatalysts were prepared by chemical reduction method and characterized using XRD, XPS, DR/UV‐Vis, BET, and TEM analysis. The effect of incident light, type and content of mono‐ and bimetallic nanoparticles deposited on titanium(IV) oxide was studied. Photocatalytic activity of as‐prepared nanocomposites was examined in the gas phase using LEDs array. High photocatalytic activity of Ag/Pt‐TiO₂ and Cu/Pt‐TiO₂ in the reaction of toluene degradation resulted from improved efficiency of interfacial charge transfer process, which was consistent with the fluorescence quenching effect revealed by photoluminescence (PL) emission spectra. The photocatalytic deactivation of Penicillium chrysogenum, a pathogenic fungi present in the indoor environment, especially in a damp or water‐damaged building using mono‐ and bimetal‐modified (Pt, Cu, Ag) titanium(IV) oxide was evaluated for the first time. TiO₂ modified with mono‐ and bimetallic NPs of Ag/Pt, Cu, and Ag deposited on TiO₂ exhibited improved fungicidal activity under LEDs illumination than pure TiO₂.     

Participatory design of a robot for demonstrating an epileptic seizure

ABSTRACT

We present the methodology and results of participatory design of a robot for presenting an epileptic seizure and a scenario of the educational workshop using this robot. Children with epilepsy encounter stigma and stereotypes and may receive inadequate aid when having an epileptic seizure. The goal of the larger project was to use the prototype device in a series of workshops for improving teachers' actions during an epileptic seizure and their attitudes towards epileptic students. In this paper, we show how various design goals for an educational robot were accomplished to fit the needs of all identified stakeholders, particularly people with epilepsy.

We used a co-design (participatory design) approach through a series of meetings participated by members of the association Polish Association for People Suffering from Epilepsy, students and faculty members of the biomedical engineering and robotics departments, teachers, psychologists and medical specialists (epileptologist, neurologist).

These meetings created an opportunity for a better understanding of the (functional and nonfunctional) requirements and resulting tradeoffs and led the participants to find appropriate solutions. Participation of people with epilepsy in the design process allowed them to deal with the potentially stereotyped representation of themselves. The prototype robot, therefore, combined goals of various stakeholders, such as an accurate presentation of an epileptic seizure, lightweight, ease of use and control, while preserving the dignity of people with epilepsy.

As a result of the co-designing process, an inexpensive robot was created and used in a series of 10 pilot workshops with 217 participants, mainly teachers of primary and middle schools. Teachers improved their understanding of epilepsy and suggested further improvements to the system.     

The use of the internet by older adults in Poland

Universal Access in the Information Society - It is generally accepted that it is young people who are particularly interested in information and communication technologies (ICT). Older adults...     

可靠性和维修性——现代设计的关键因素（二）

2.3可靠性维修性的定量分析方法现代设计过程设计到多种学科,其目的是获得合理的市场价格、性能和功能性。目前绝大多数设备说明书中都包含有一个报告,其中定义了预期的系统效率或可用性,一般来说,系统的可用性可以这样计算:A=总的可用总时的间可-用实时际间停机时间=MTTMRT BM     

Influence of Radiation on the Properties and the Stability of Hybrid Perovskites

Organic–inorganic perovskites are well suited for optoelectronic applications. In particular, perovskite single and perovskite tandem solar cells with silicon are close to their market entry. Despite their swift rise in efficiency to more than 21%, solar cell lifetimes are way below the needed 25 years. In fact, comparison of the time when the device performance has degraded to 80% of its initial value (T₈₀ lifetime) of numerous solar cells throughout the literature reveals a strongly reduced stability under illumination. Herein, the various detrimental effects are discussed. Most notably, moisture‐ and heat‐related degradation can be mitigated easily by now. Recently, however, several photoinduced degradation mechanisms have been observed. Under illumination, mixed perovskites tend to phase segregate, while, further, oxygen catalyzes deprotonation of the organic cations. Additionally, during illumination photogenerated charge can be trapped in the N? H antibonding orbitals causing dissociation of the organic cation. On the other hand, organic–inorganic perovskites exhibit a high radiation hardness that is superior to crystalline silicon. Here, the proposed degradation mechanisms reported in the literature are thoroughly reviewed and the microscopic mechanisms and their implications for solar cells are discussed.     

Tensile and Fatigue Analysis of 3D-Printed Polyethylene Terephthalate Glycol

Journal of Failure Analysis and Prevention - This paper investigates the tensile and fatigue behavior of polyethylene terephthalate glycol (PETG) parts manufactured by fused filament fabrication...