Effects of Non-Darcian and Inlet Conditions on the Forced Convection Along a Vertical Plate With Film Evaporation

The present study analyzes theoretically the non-Darcian effects and inlet conditions of forced convection flow with liquid film evaporation in a porous medium. The physical scheme includes a liquid–air streams combined system; the liquid film falls down along the plate and is exposed to a cocurrent forced moist air stream. The axial momentum, energy, and concentration equations for the air and water flows are developed based on the steady two-dimensional (2-D) laminar boundary layer model. The non-Darcian convective, boundary, and inertia effects are considered to describe the momentum characteristics of a porous medium. The paper clearly describes the temperature and mass concentration variations at the liquid–air interface and provides the heat and mass transfer distributions along the heated plate. Then, the paper further evaluates the non-Darcian effects and inlet conditions on the heat transfer and evaporating rate of liquid film evaporation. The numerical results show that latent heat transfer plays the dominant heat transfer role. Carrying out a parametric analysis indicates that higher air Reynolds number, higher wetted wall temperature, and lower moist air relative humidity will produce a better evaporating rate and heat transfer rate. In addition, a non-Darcy model should be adopted in the present study. The maximum error for predictions of heat and mass transfer performance will be 21% when the Darcy model is used.     

A PROCEDURE FOR EVALUATION OF COMMERCIAL FCC CATALYSTS

Based on the correlations between laboratory units and commercial plants, a procedure has been developed to guide commercial FCC (Fluid Catalytic Cracking) catalysts selection. Examining the operability of catalyst mixtures during catalyst transition period is emphasized. The testing procedure is simple and reliable. A commercially available catalyst and the catalyst currently in use have been compared to demonstrate the applicability of this procedure. The commercial testing has confirmed the reliability of laboratory results. The use of the catalyst evaluated led to a 30% saving in catalyst cost.     

Synthesis and properties of organosoluble polyimides derived from 2,2′‐dibromo‐ and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianilines

Two new aromatic diamines, 2,2′‐dibromo‐4,4′‐oxydianiline (DB‐ODA 4 ) and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianiline (TB‐ODA 5 ), have been synthesized by oxidation, bromination, and reduction of 4,4′‐oxydianiline (4,4′‐ODA). Novel polyimides 6a–f and 7a–f were prepared by reacting DB‐ODA ( 4 ) and TB‐ODA ( 5 ) with several dianhydrides by one‐step method, respectively. The inherent viscosities of these polyimides ranged from 0.31 to 0.99 dL/g (0.5 g/dL, in NMP at 30°C). These polyimides showed enhanced solubilities compared to those derived from 4,4′‐oxydianiline and corresponding dianhydrides. Especially, polyimides 7a , derived from rigid PMDA and TB‐ODA ( 5 ) can also be soluble in THF, DMF, DMAc, DMSO, and NMP. These polyimides also exhibited good thermal stability. Their glass transition temperatures measured by thermal mechanical analysis (TMA) ranged from 251 to 328°C. When the same dianhydrides were used, polyimides 7 containing four bromide substituents had higher glass transition temperatures than polyimides 6 containing two bromide substituents. The effects of incorporating more polarizable bromides on the refractive indices of polyimides were also investigated. The average refractive indices (n_av) measured at 633 nm were from 1.6088 to 1.7072, and the in‐plane/out‐of‐plane birefringences (Δn) were from 0.0098 to 0.0445. It was found that the refractive indices are slightly higher when polyimides contain more bromides. However, this effect is not very obvious. It might be due to loose chain packing resulted from bromide substituents at the 2,2′ and 2,2′,6,6′ positions of the oxydiphenylene moieties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Graphite-based indirect laser sintered fuel cell bipolar plates containing carbon fiber additions

Critical considerations for laser sintered (LS) graphite bipolar plates are the strength of the parts in the green, brown and finished states as well as the final part electrical conductivity. The effect of 0-26 volume percent chopped carbon fiber (CF) on strength and electrical conductivity of LS graphite bipolar plates was evaluated. Fiber additions improved the green and brown strength significantly. Finished part flexural strength increased from 35 MPa to almost 50 MPa with CF additions. The electrical conductivity of finished parts was lowered by CF additions.     

Identification of the protein 4.1 binding interface on glycophorin C and p55, a homologue of the Drosophila discs-large tumor suppressor protein

Protein 4.1 is the prototype of a family of proteins that include ezrin, talin, brain tumor suppressor merlin, and tyrosine phosphatases. All members of the protein 4.1 superfamily share a highly conserved N-terminal 30-kDa domain whose biological function is poorly understood. It is believed that the attachment of the cytoskeleton to the membrane may be mediated via this 30-kDa domain, a function that requires formation of multiprotein complexes at the plasma membrane. In this investigation, synthetically tagged peptides and bacterially expressed proteins were used to map the protein 4.1 binding site on human erythroid glycophorin C, a transmembrane glycoprotein, and on human erythroid p55, a palmitoylated peripheral membrane phosphoprotein. The results show that the 30-kDa domain of protein 4.1 binds to a 12-amino acid segment within the cytoplasmic domain of glycophorin C and to a positively charged, 39-amino acid motif in p55. Sequences similar to this charged motif are conserved in other members of the p55 superfamily, including the Drosophila discs-large tumor suppressor protein. Our data provide new insights into how protein 4.1, glycophorin C, p55, and their non-erythroid homologues, interact with the cytoskeleton to exert their physiological effects.     

Water Absorption of Poly(lactic acid) Nanocomposites: Effects of Nanofillers and Maleated Rubbers

Injection-molded poly(lactic acid)/organo-montmorillonite (PLA/OMMT) and poly(lactic acid)/ nano-precipitated calcium carbonate (PLA/NPCC) were exposed to a water absorption test at 30°C for 70 days. The analysis was focused on the water diffusion kinetics and impact strength changes induced by the hydrolysis. The diffusion exponent (n) values of all the PLA samples are less than 0.5, indicating the Fickian diffusion model (case I) is obeyed. Adding nanofillers and maleated rubbers (SEBS-g-MAH or EPR-g-MAH) increased equilibrium moisture content but decreased diffusion coefficient values of PLA. The recoverability and retention-ability of the maleated rubbers toughened PLA/OMMT and PLA/NPCC after water absorption are excellent.     

Superplastic elongation characteristic of fine grained magnesium alloy ZK60

This paper employs simple rolling process plus annealing to refine the grain size of magnesium alloy ZK60. This goal is effectively achieved, obtaining grains as fine as ∼3.7 μm. Such a specimen shows an elongation of 642%, and its ultimate fracture surface exhibits intergranular separation and significant grain growth. Additionally, the effects of the specimen’s geometry and tensile test axis with respect to the rolling direction on superplastic elongation is studied, which has not been done before.     

Hydroxygenkwanin Increases the Sensitivity of Liver Cancer Cells to Chemotherapy by Inhibiting DNA Damage Response in Mouse Xenograft Models

Molecules involved in DNA damage response (DDR) are often overexpressed in cancer cells, resulting in poor responses to chemotherapy and radiotherapy. Although treatment efficacy can be improved with the concomitant use of DNA repair inhibitors, the accompanying side effects can compromise the quality of life of patients. Therefore, in this study, we identified a natural compound that could inhibit DDR, using the single-strand annealing yeast-cell analysis system, and explored its mechanisms of action and potential as a chemotherapy adjuvant in hepatocellular carcinoma (HCC) cell lines using comet assay, flow cytometry, Western blotting, immunofluorescence staining, and functional analyses. We developed a mouse model to verify the in vitro findings. We found that hydroxygenkwanin (HGK) inhibited the expression of RAD51 and progression of homologous recombination, thereby suppressing the ability of the HCC cell lines to repair DNA damage and enhancing their sensitivity to doxorubicin. HGK inhibited the phosphorylation of DNA damage checkpoint proteins, leading to apoptosis in the HCC cell lines. In the mouse xenograft model, HGK enhanced the sensitivity of liver cancer cells to doxorubicin without any physiological toxicity. Thus, HGK can inhibit DDR in liver cancer cells and mouse models, making it suitable for use as a chemotherapy adjuvant.