Studies of the influence of alloying elements on the growth of ferrite from austenite under decarburization conditions: Fe-C-Nl alloys

We have evaluated controlled decarburization as a method for probing the effect of alloying elements on ferrite growth from austenite. The technique permits the exploration of longer-time ferrite layer growth; it minimizes the effects of interface structure on ferrite growth; and it permits the isolation of the effects of temperature and alloying element concentration on ferrite/austenite interface motion. The study of the decarburization of initially homogeneous Fe-C-Ni alloys was complemented by experiments using specimens with a controlled nickel concentration gradient. Although the decarburization method yields consistent results at longer times, it is found to be less appropriate for the study of initial ferrite growth. Nucleation in the gas/solid interface region, coupled with uncertainties about the precise time of decarburization, leads to large relative errors at the earliest times. For these reasons, the method is considered a valuable complement to studies based on precipitation boundary conditions. This article is based on a presentation given in the symposium “The Effects of Alloying Elements on the Gamma to Alpha Transformation in Steels,” October 6, 2002, at the TMS Fall Meeting in Columbus, Ohio, under the auspices of the McMaster Centre for Steel Research and the TMS-ASM Phase Transformations Committee.     

分置式牛津型斯特林制冷机的数值分析与实验验证

对分置式牛津型斯特林制冷机进行了数值计算 ,介绍了计算模型考虑到的众多不可逆因素。通过对计算结果与实验结果的对比 ,验证了本文数值计算的准确性 ,说明本文计算模型与数值处理方法是切实可行的     

金刚烷最新研究

金刚烷是近 30年来发展起来的一种新型精细化工原料。简要介绍了金刚烷的分子结构、性质及其主要用途 ,重点对近年来国内外报道过的金刚烷合成方法进行了评述 ,在此基础上指出了金刚烷化工的未来发展趋势。     

扇形段电磁搅拌对82B钢连铸坯成分和组织的影响

进行了结晶器搅拌和结晶器 +扇形段电磁搅拌连铸 82B钢 2 80mm× 380mm方坯的工业试验。结果表明 ,扇形段搅拌降低和改善了铸坯的中心偏析、疏松和夹杂物分布。 82B钢铸坯经扇形段搅拌后 ,中心部位碳含量峰值明显减小 ,碳偏析指数降低 5 7%～ 1 0 8% ,铸坯成分的方差值 (σ)减小 32 %～ 34 9%。     

高炉与风机配置的优化

根据高炉风机配置的具体情况 ,为充分发挥大风机生产优势 ,建立了适宜的送风制度及装料制度 ,对利旧风机采取了自动防喘振控制、高压水阻软启动的措施 ,风机仪表采用集散控制 ,并优化上料系统 ,提高了高炉上料能力。一系列优化方案保证了高炉稳定、安全、顺行 ,1号、2号高炉利用系数分别由 3 .3 64、3 .43 2t/m3.d提高到 3 .917和 3 .767t/m3.d。     

一种新型陶瓷材料及其耐磨性

对新型Ａｌ２Ｏ３－ＴｉＣ－Ｃｏ陶瓷的磨粒磨损，冲蚀磨损及其在单颗粒作用下的摩擦磨损行为进行了研究。与ＡＴ３０（７０ｗｔ％Ａｌ２Ｏ３－３０ｗｔ％ＴｉＣ）陶瓷相比，Ａｌ２Ｏ３－ＴｉＣ－Ｃｏ陶瓷具有更为良好的耐磨性，金属钴的存在提高了基体的韧性，细化了晶粒，其综合力学性能得到了显著提高，ＡＴＣ陶瓷样品耐磨性与其强韧化水平和细致的组织结构有关。     

肝癌碘油栓塞后肝区平片所见碘油沉积量与疗效关系

本文分析了90例肝癌肝动脉灌注化疗碘油栓塞后,肝区平片所见碘油沉积量和疗效的关系。碘油沉积分为多,中,少三组,从ATP下降,肿瘤缩小率及一年生存率三方面比较。结果沉积多的与中等组三项都有显著差别;沉积中等的与少的组差别不明显。说明碘油沉积要达到一定的量后,疗效才会显著提高。同时分析了影响碘油沉积的几个因素。     

Effect of dual-scale microstructure on the toughness of laminar zirconia composites

Numerical study by the finite element method (FEM) is performed to investigate the effect of dual-scale microstructure on the toughness of laminar zirconia composite. The computation is based on the micromechanics constitutive model of polycrystal transformation plasticity developed by Sun et al. [10] where both transformation induced shear and softening effects during autocatalytic transformation are taken into account. The numerical simulation presented in this paper successfully reproduced the experimentally observed two effects of the dual-scale microstructure on the toughness of laminar zirconia composite, i.e., the truncation of the elongated transformation frontal zone that forms in single phase Ce-ZrO₂ and the propagation of the transformation zone along the layers normal to the crack plane. Quantitative analysis on the role of microstructure in transformation toughening of laminar zirconia composite is first carried out in the present work which will provide a starting point for the microstructural design of this novel advanced composite in the future.Presented at the Far East Fracture Group (FEFG) International Symposium on Fracture and Strength of Solids. 4–7 July 1994 in Xi'an, China.     

内燃机油添加剂之间相互作用的研究

探讨了内燃机油添加剂之间的相互作用，磺酸盐与水杨酸盐的相容性差，混合后有沉淀物生产；水杨酸盐与丁二酰亚胺，ＺＤＤＰ有较弱的相互作用，添加量小时无沉淀物生成，添加量大时才有沉淀物生成；磺酸盐与丁二酰亚胺，ＺＤＤＰ的相容性好，混合后沉淀物生成。该结论为内燃机油的调配，贮存和全用提供了科学依据。