Image super-resolution based on multi-space sparse representation

Sparse representation provides a new method of generating a super-resolution image from a single low resolution input image. An over-complete base for sparse representation is an essential part of such methods. However, discovering the over-complete base with efficient representation from a large amount of image patches is a difficult problem. In this paper, we propose a super-resolution construction based on multi-space sparse representation to efficiently solve the problem. In the representation, image patches are decomposed into a structure component and a texture component represented by the over-complete bases of their own spaces so that their high-level features can be captured by the bases. In the implementation, a prior knowledge about low resolution images generation is combined to the typical base construction for high construction quality. Experiment results demonstrate that the proposed method significantly improves the PSNR, SSIM and visual quality of reconstructed high-resolution image.     

Prediction-based realistic 3D model compression

The benefit of using the geometry image to represent an arbitrary 3D mesh is that the 3D mesh can be re-sampled as a completely regular structure and coded efficiently by common image compression methods. For geometry image-based 3D mesh compression, we need to code the normal-map images while coding geometry images to improve the subjective quality and realistic effects of the reconstructed model. In traditional methods, a geometry image and a normal-map image are coded independently. However a strong correlation exists between these two kinds of images, because both of them are generated from the same 3D mesh and share the same parameterization. In this paper we propose a predictive coding framework, in which the normal-map image is predicted based on the geometric correlation between them. Additionally we utilize the strong geometric correlation among three components of normal-map image to improve the predicting accuracy. The experimental results show the proposed coding framework improves the coding efficiency of normal-map image, meanwhile the realistic effect of a 3D mesh is significantly enhanced.     

新型尿素产品的开发

介绍了国内外新型尿素产品（大颗粒尿素、涂层尿素、包膜尿素、长效尿素）的生产工艺和产品特点。     

空客飞机编码译码组件DEU B故障分析与系统优化

针对机龄较长的A320飞机多次重复出现DEU B或DEU B 300 RH等故障信息,难以排除故障,本文将研究空客排故手册TSM和图解目录手册IPC中的排故信息,以及编码译码计算机软件和硬件的情况,判断故障的原因,彻底解决这一故障,提高航空器的可靠性,控制维修成本。最终,在大量研究之后,发现是编码译码计算机在互换性和混装性方面出了问题,并经过系统设备优化升级、手册修改等措施,取得了预期的效果。     

工业变换炉最佳催化剂粒度

本文在建立数学模型的基础上，用计算机模拟变换炉的操作工况，考察改变催化剂粒度对经济效益的影响，从而得到工业变换炉催化剂颗粒最佳尺寸，开发了以经济效益为考察依据，工业反应器中催化剂颗粒最佳尺寸的计算方法。     

浅析计算机网络维护工作和管理

随着现代社会的进步,科学技术取得了飞速发展,计算机网络得到了大量普及,极大地促进了社会生产和人们生活水平的提高,对社会的整体发展起着至关重要的作用.本次研究将从网络维护、管理的意义和应注意的问题出发,对网络网络维护与管理相关策略进行深入分析和探究.     

Microstructures and Dielectric Properties of Pure and Doped KNbO3 Ceramics

Regions consisting of grains of pronounced cubic develpment exist in pure KNbO₃ ceramics which exhibit a temperature dependence of dielectric constant very similar to that of KNbO₃ crystals. KNbO₃ ceramics doped with GeO₂-K₂O additives have small grains, semiconducting resistance, and a different curve of dielectric constant versus temperature. As the average grain size decreases, the shape of the curve differs increasingly from that of KNbO₃ crystals.     

Studies of structure and cycleability of LiMn2O4 and LiNd0.01Mn1.99O4 as cathode for Li-ion batteries

Lithium manganese oxides LiMn₂O₄ and rare earth elements doped LiNd_0.01Mn_1.99O₄ were synthesized by microwave method. The structure and the electrochemical performances of the samples were characterized. XRD data shows both samples exhibit the same pure spinel phase. But due to the introduction of Nd³⁺ ion into the unit cell, the lattice parameter of the Nd-doped spinel was larger than that of the undoped one. The two samples had a similar morphology including small particle size and homogeneous particle distribution as tested by SEM. The cyclic voltammmetry and constant-current charge-discharge tested that Nd-doped spinel displayed a better reversibility and cycleability.     

Studies on crystal morphology and crystallization kinetics of polypropylene filled with CaCO3 of different size and size distribution

Changes in the crystal morphology, crystallinity, and the melting temperature of thermoplastics resulted in significant changes in the mechanical behavior of composites containing them. For this reason, the research of crystal morphology and crystallization kinetics in thermoplastic composites became an important requirement. The thermoplastic filled with the filler of different size gradation was a new method for improving processability of thermoplastic composites. We have previously reported that the melt viscosity of polypropylene (PP) composites, which were filled with 30 wt % CaCO₃ of effective size gradation, could be evidently declined. In this study, two sizes of CaCO₃, 325 meshes and 1500 meshes, were blended by different proportions and filled into PP matrix with 30 wt %. Crystal morphology and isothermal crystallization kinetics of a series of composites were characterized by differential scanning calorimeter (DSC) and polarizing microscope. The results showed that composites filled with CaCO₃ of effective size gradation leaded to a well‐crystalline order and a large crystal size, while their isothermal crystallization kinetics and crystallization rate constant (k) were declined, and their Avrami exponents (n) and crystallization half‐life (t_1/2) were increased compared with the composites filled with single size CaCO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2437–2444, 2006