A case of paraquat poisoning and subsequent fatality presenting to an emergency department

Paraquat (1,1'-dimethyl-4,4'-dipyridylium) is an herbicide associated with both accidental and intentional ingestion, leading to severe and often fatal toxicity. Prognosis is largely dependent on the amount of paraquat absorbed. Rapid identification of the symptoms of paraquat toxicity (burns or ulceration at the site of ingestion or injection, acute respiratory distress, and renal failure) can facilitate early treatment intervention to limit absorption. We report a case of a 71-year-old man with a suicidal ingestion of paraquat 2 days prior to presentation. Serum paraquat levels, time elapsed since ingestion, and clinical symptoms all indicated poor prognosis. The patient developed severe respiratory distress and progressive renal failure, and died 6 days after admission to the hospital.     

The new parameters of motor unit potential in the diagnosis of neurogenic lesions in spike-triggered averaging electromyography

The chronic Pseudomonas aeruginosa lung infection in cystic fibrosis (CF) is characterized by a pronounced antibody response and microcolonies surrounded by numerous polymorphonuclear neutrophils (PMN). Poor prognosis is correlated with a high antibody response to P. aeruginosa antigens. An animal model of this infection was established in two strains of mice: C3H/HeN and BALB/c, generally known as Th1 and Th2 responders, respectively, which were challenged with alginate-embedded P. aeruginosa. Mortality was significantly lower in C3H/HeN compared to BALB/c mice (p < 0.025). P. aeruginosa was cleared more efficiently in C3H/HeN mice and significantly more C3H/HeN mice showed normal lung histopathology (p < 0.02), and we found significantly fewer microabscesses in C3H/HeN mice than in BALB/c mice (p < 0.005). In supernatants from P. aeruginosa antigen and concanavalin A-stimulated spleen cells from the two strains of mice, the interferon-(IFN-) gamma levels were higher, whereas IL-4 levels were lower in C3H/HeN mice than in BALB/c mice. The implications of these findings for CF patients with chronic P. aeruginosa lung infection are discussed.     

Quick construction of efficient morphological operators bycomputational learning

A new technique is introduced to construct generic morphological operators quickly and automatically using input-output pairs of images as training samples. This process can be modelled as generalised PAC (probably approximately correct) learning. A new representation for morphological operators, much more efficient than the traditional one, is also proposed     

Semiconductor laser dynamics for feedback from afinite-penetration-depth phase-conjugate mirror

Most of the previous treatments of semiconductor lasers subject to optical feedback from a phase-conjugate mirror (PCM) have assumed that the PCM responds instantaneously. Furthermore, the mechanism responsible for phase conjugation does not usually enter into the analysis. In this paper, we derive the time-dependent reflectivity of a PCM created through nondegenerate four-wave mixing in a Kerr-type nonlinear medium. The resulting laser dynamics are compared with the case of the ideal PCM, as a function of the external-cavity length, the PCM reflectivity, and the PCM interaction depth. The PCM with a significant interaction depth tends to suppress otherwise chaotic output and produces pulses whose repetition rate is tunable by varying PCM reflectivity. At high feedback levels, it stabilizes the laser output. We use the circle-map formalism to explain our numerical results     

Generation of frequency-chirped optical pulses in a large-slippagefree-electron laser

We have investigated the optical output of the free-electron laser for infrared experiments (FELIX) when it is driven by an electron beam with a ramped energy. We show that the applied slow ramp on the electron beam energy leads to a frequency chirp on each picosecond optical pulse. Typical values for the chirp are 0.2% frequency sweep across a 1.5-ps-long optical pulse. The optical pulses were analyzed with a double-grating pair and with a second-order autocorrelator. The pulse duration was reduced in the double-grating pair by 20%. A linear dependence of the chirp on the cavity desynchronization was measured     

A 1.5-V full-swing bootstrapped CMOS large capacitive-load drivercircuit suitable for low-voltage CMOS VLSI

This paper reports a 1.5-V full-swing bootstrapped CMOS large capacitive-load driver circuit using two bootstrap capacitors to enhance the switching speed for low-voltage CMOS VLSI. For a supply voltage of 1.5 V, the full-swing bootstrapped CMOS driver circuit shows a 2.2 times improvement in switching speed in driving a capacitive load of 10 pF as compared to the conventional CMOS driver circuit. Even for a supply voltage of 1 V, this full-swing bootstrapped CMOS large capacitive-load driver circuit is still advantageous     

Optical imaging of anatomical maps derived from magnetic resonanceimages using time-independent optical sources

Presents a model suitable for computing images of absorption cross sections of thick tissue structures illuminated at near infrared (NIR) wavelengths from tomographic projection data. Image reconstruction is accomplished by solving a system of linear equations derived from transport theory. Reconstruction results using different algebraic solvers are shown for anatomical maps of the breast, derived from magnetic resonance imaging data, containing two simulated pathologies, in which case qualitatively good reconstructions were obtained. Evaluation of magnetic resonance (MR) data to optimize NIR optical tomographic imaging methods and to assess the feasibility of a combined MR-optical measurement scheme is discussed     

FATIGUE CRACK GROWTH UNDER MODE II LOADING

Abstract— The behavior of fatigue crack growth for low and medium carbon steels, an austenitic stainless steel and an aluminum alloy under pure Mode II loading was investigated experimentally, using cruciform specimens. The results show that under pure Mode II loading, fatigue crack propagation has three possibilities, namely, bifurcation into two branches, propagation along the original Mode II direction, and the mixture of these two situations, depending on the material. The growth rate da/dN vs. ΔK_II relation for Mode II propagation is similar to a Pans type law for Mode I growth. Fractographic observations by optical microscopy and SEM were made also on all specimens tested. When a crack branched, striations parallel to the crack front which were often associated with Mode I fatigue crack growth were observed and long marks parallel to the crack propagation direction were also found for slanted fracture surfaces. When a crack propagated along the original Mode II direction, many frictional marks parallel to the crack propagation direction were observed.     

Mobile robot path planning based on hierarchical hexagonal decomposition and artificial potential fields

In this article, a new algorithm based on an artificial potential field and hierarchical cell decomposition technique is developed to solve the find-path problem for a mobile robot. The complete map of the workspace including obstacle locations is assumed to be known a priori. The basic cell structure used for decomposition is a hexagon. The artificial potential field is based on an attractive force from the goal position and repelling forces from the obstacles. Computer simulations of the algorithm for various obstacle scenarios are also presented. © 1994 John Wiley & Sons, Inc.