3e轻质高强内外墙板的生产

１什么是３e轻质墙板３e轻质墙板的“３e”是英文Extruded（真空挤出的）、Economical（经济实用的）、Ecological（生态环保的）３个单词的缩写。它概括了该种板材不同于其他板材的特点，是利用真空挤出法制造的高强、轻质、纤维加强、高孔洞率的水泥内外墙板。该命名和其主要技术来源于美国斯蒂尔公司（J．C．STEELE）和德国翰得乐公司（HandleGmbH）（美国斯蒂尔公司是德国翰得乐公司的控股公司）。约在３５年前德国翰得乐公司就使用真空挤出成型法开始了纤维加强轻质水泥板的生产研究。当时最理想的纤维加强材料是石棉，后来相继…     

欧洲无线DSL的发展现状及市场前景

对欧洲的立法者来说，目前最为关注的课题之一便是如何解决数字鸿沟这一困扰欧洲大陆信息与通信技术整体发展水平的矛盾。向人们提供高速因特网接入服务是消除数字鸿沟的有效手段，而无线数字用户线技术以及其成低、通信质量好、覆盖范围大及灵活性等优势成为宽带接入技术中的佼佼者，并获得很多欧洲国家电信运营商的青睐。     

Improvement of RCA transistor using RTA annealing after theformation of interfacial oxide

A polysilicon emitter RCA transistor (an ultra-thin interfacial oxide layer exists between polysilicon and silicon emitter) is presented which can operate at 77 K for the first time. An ultra-thin (1.5 nm) interfacial oxide layer is grown deliberately between polysilicon and silicon emitter using RCA oxidation and excellent device stability is obtained after rapid thermal annealing (RTA) treatment in nitrogen atmosphere. The RCA transistor exhibits good electrical performance at very low temperature for an emitter area of 3 × 8 μm². The maximum toggle frequency of a 1:2 static divider is 1.2 GHz and 732 MHz at 300 K and 77 K, respectively     

Top-Seeded Melt-Growth of YBa2Cus3Ox Crystals for Neutron Diffraction Studies

We have grown cubic centimeter-size crystals of YBa₂Cu₃O _x suitable for neutron studies, by a top-seeded melt-growth technique. Growth conditions were optimized with an eye toward maximizing phase purity. It was found that the addition of 2% Y₂BaCuO₅ and 0.5% Pt (by mass) were required to prevent melt loss and to obtain the highest crystallinity. A neutron diffraction study on a mosaic of six such crystals found that the final Y₂BaCuO₅ concentration was 5%, while other impurity phases comprised less than 1% by volume. The oxygen content was set to x = 6.5, the crystals were detwinned, and then carefully annealed to give the well-ordered ortho-II phase. The neutron study determined that 70% of the mosaic's volume was in the majority orthorhomic domain. The neutron (006) and (110) rocking curve widths were ～1° per crystal and ～2.2° for the mosaic, and the oxygen chain correlation lengths were >100 Å in the a- and b-directions and ～50 Å in the c-direction.     

建筑墙体表面传热系数辨识研究

对实验房间南向墙体内表面中心区域的换热过程进行实验，发现当风速在0－5．5m/s之间时，表面传热系数在8－18W（m^2.K）之间波动，而风向对墙体表面传热系数影响不大；用辅助变量法分析墙体表面传热过程，并结合实验推导出墙体表面传热系数。模型的预测结果与实测结果吻合良好。     

无线智能网技术

本介绍CDMA无线智能网（WIN）的产生背景、技术标准、提供的业务、与GSM移动智能网技术上的差异以及它在实际工程中的应用，最后对WIN的发展进行展望。     

温度计量技术进展近况

近年来，在把ITS－90更方便地传递到工作用温度计，温度测量仪表采用信息技术和特殊工业场合测温应用方面均取得了一些进展。本文介绍了国内外温度技术在这些方面进展的状况。对温度定点，校验器，热电偶和热电阻测温，辐射测温，光纤测温和信息时代自动化系统中的温度检测仪表的重要进展分别作了介绍。     

TP130TT高抗挤套管研究与应用

为了提高盐层段固井质量 ,中原油田研究开发了 TP130 TT高抗挤套管 ,性能试验评价表明 ,其抗挤强度超过 16 0 MPa,并给出了其固井质量评价标准。在中原油 346口井中的应用表明 ,该套管有效地解决了盐层段套管损坏问题 ,延长了油气水井寿命 ,经济效益和社会效益显著。     

Interface characteristics and mechanical properties of carbon fibre reinforced copper composites

Interface characteristics of carbon fibre reinforced copper matrix composites materials with various interface states and their effect on the flexural strength of composites have been studied. Interfacial states are mechanical bonding, dissolution bonding and reaction bonding. To a certain extent, raising the interfacial strength enables an increase in the flexural strength due to prevention of carbon fibre being pulled out under low stress during fracture process of composites. Raising the interfacial bondage strength, causes the brittleness of composites to increase; the fracture surface of composites is converted from a fibre pull-out model to a fibre even model. While strengthening the interface bondage, the extent of chemical reaction and dissolution at the interface must be controlled to avoid degrading the carbon fibre.     

两段式热脱焦油煤气炉在环形加热炉上的开发应用

介绍了两段式煤气发生炉热脱焦油煤气在无缝钢管环形加热炉上的开发与应用 ,以及两段式煤气发生炉热脱焦油煤气站的设计和采用热脱焦油煤气代替重油所产生的经济效益