In-plane contributions to phase contrast in intermittent contact atomic force microscopy

Contrast in the phase response of intermittent-contact atomic force microscopy (IC-AFM) reveals in-plane structural and mechanical properties of polymer monolayers. This result is unexpected, as IC-AFM has previously only been considered as a probe of out-of-plane properties. Until now, AFM measurements of nanoscale in-plane properties have employed contact mode techniques. In-plane property measurements are possible with intermittent contact AFM because there is a small but significant component of tip motion parallel to the sample surface. This in-plane component of tip displacement is virtually universal in AFM, implying that oscillating-tip techniques generally are sensitive to in-plane material properties. We present a simple Hertzian model of intermittent-contact AFM that includes such an in-plane displacement.     

Metallurgical and tribological investigations of aluminium bronze bushes made by a novel centrifugal casting technique

Aluminium bronzes have been used as high strength, corrosion and wear resistance alloys for many decades. However, the alloy has a narrow solidification range and a complex nature which has confined its use to a limited field of applications. Published data on the wear characteristics and the metallurgical nature of the alloy system is limited, leaving wide possibilities for research. In the work described in this paper a study has been made of the metallurgical and tribological characteristics of aluminium bronzes conforming to BS 1400 AB2 specification. A novel centrifugal casting technique using a bonded sand lining integrated into a standard rotating die was adapted to cast a series of test bushes. Mechanical and microscopic aspects are studied and an attempt is made to correlate the physical properties with the tribological behaviour of the bushes. The results show that the test behaviour of the test bush was in some respects better than that of commercially produced bushes made by forging techniques. Detrimental embrittlement, due to ‘self annealing’ is significantly reduced by the adoption of the novel centrifugal casting technique referred to above.     

Electrospun Azithromycin-Laden Gelatin Methacryloyl Fibers for Endodontic Infection Control

This study was aimed at engineering photocrosslinkable azithromycin (AZ)-laden gelatin methacryloyl fibers via electrospinning to serve as a localized and biodegradable drug delivery system for endodontic infection control. AZ at three distinct amounts was mixed with solubilized gelatin methacryloyl and the photoinitiator to obtain the following fibers: GelMA+5%AZ, GelMA+10%AZ, and GelMA+15%AZ. Fiber morphology, diameter, AZ incorporation, mechanical properties, degradation profile, and antimicrobial action against Aggregatibacter actinomycetemcomitans and Actinomyces naeslundii were also studied. In vitro compatibility with human-derived dental pulp stem cells and inflammatory response in vivo using a subcutaneous rat model were also determined. A bead-free fibrous microstructure with interconnected pores was observed for all groups. GelMA and GelMA+10%AZ had the highest fiber diameter means. The tensile strength of the GelMA-based fibers was reduced upon AZ addition. A similar pattern was observed for the degradation profile in vitro. GelMA+15%AZ fibers led to the highest bacterial inhibition. The presence of AZ, regardless of the concentration, did not pose significant toxicity. In vivo findings indicated higher blood vessel formation, mild inflammation, and mature and thick well-oriented collagen fibers interweaving with the engineered fibers. Altogether, AZ-laden photocrosslinkable GelMA fibers had adequate mechanical and degradation properties, with 15%AZ displaying significant antimicrobial activity without compromising biocompatibility.     

Visualizing Intramolecular Dynamics of Membrane Proteins

Membrane proteins play important roles in biological functions, with accompanying allosteric structure changes. Understanding intramolecular dynamics helps elucidate catalytic mechanisms and develop new drugs. In contrast to the various technologies for structural analysis, methods for analyzing intramolecular dynamics are limited. Single-molecule measurements using optical microscopy have been widely used for kinetic analysis. Recently, improvements in detectors and image analysis technology have made it possible to use single-molecule determination methods using X-rays and electron beams, such as diffracted X-ray tracking (DXT), X-ray free electron laser (XFEL) imaging, and cryo-electron microscopy (cryo-EM). High-speed atomic force microscopy (HS-AFM) is a scanning probe microscope that can capture the structural dynamics of biomolecules in real time at the single-molecule level. Time-resolved techniques also facilitate an understanding of real-time intramolecular processes during chemical reactions. In this review, recent advances in membrane protein dynamics visualization techniques were presented.     

Perfluorinated surfactants in surface, subsurface water and microlayer from Dalian Coastal waters in China

Two predominant perfluorinated compounds (PFCs), Perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA), in surface water (SW, 0-20 cm), subsurface water (SSW, > 30 cm depth), and sea surface microlayer (SML, 50 microm thickness) were measured from Dalian Coastal waters in China. The SML samples were collected using glass-plate dipping method. Analysis of the PFCs was conducted through solid-phase extraction, followed by LC/MS-SIM. The PFC's concentrations in SW samples were consistent with previously reported data in this region. Significantly higher concentrations of PFCs were found in SML samples than corresponding SSW samples. The enrichment factors (EF = C(SML)/C(SSW)) for PFOS were as high as 24-109 atthree near-shore sites. The concentration in SW was also generally higher than corresponding SSW samples, giving C(SW)/C(SSW) mean ratios of 1.5 and 1.4 for PFOS and PFOA, respectively. This apparent enrichment of PFCs in surface water, especially in the microlayer, has implications for designing measurement techniques, understanding their distributions, and sea spray-mediated transport in the environment.     

Detection of Leuconostoc strains at a meat processing plant using polymerase chain reaction

To simplify the labor-intensive conventional routine testing of samples to detect Leuconostoc at a meat processing plant, we developed polymerase chain reaction (PCR) primers specific for Leuconostoc from 16S rRNA gene sequences. These primers did not detect other common lactic acid bacteria such as Lactobacillus plantarum, Lact. sake, Lact. fermentum, Lact. acidophilus and Weissella viridescens. PCR with this primer detected all Leuconostoc species tested (Leu. mesenteroides subsp. mesenteroides, Leu. pseudomesenteroides, Leu. carnosum, Leu. lactic, Leu. citreum, Leu. amelibiosum, Leu. gelidum), except for Leu. fallax, and no other lactic acid bacteria on agarose gel electrophoresis. The method could identify areas contaminated with Leuconostoc in a large-scale industrial meat processing plant. Of 69 samples analyzed, 34 were positive for Leuconostoc according to the conventional culture method (isolation of LAB producing dextran) and PCR, whereas 29 were negative according to both. Six samples were culture-negative but positive by PCR. No false negative results were generated by PCR. The method is rapid and simple, is useful for routinely monitoring areas contaminated with Leuconostoc in meat processing plants, and could help to prevent the spoilage of meat products.     

Contamination levels of PCDDs, PCDFs and Co-PCBs in commercial baby foods in Japan

To examine dioxin contamination in commercial baby foods in Japan, congener analyses of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) were performed on 102 varieties of baby foods obtained from supermarkets in 2001-2002. The toxic equivalent quantity (TEQ) levels for dioxins in samples ranged from < 0.001 to 0.135 pg-TEQ/g wet weight when undetected or trace levels of congeners were taken as zero. Among 102 samples tested, 26 samples exceeded 0.010 pg-TEQ/g. The highest TEQ value was for "sardine, vegetables" (0.135 pg-TEQ/g), followed by "Japanese radish (daikon), sardine" (0.080 pg-TEQ/g). Thus, dioxins were detected at low levels in baby foods containing animal products such as fishes and/or dairy products.     

Electromyography of Eating Apples: Influences of Cooking, Cutting, and Peeling

ABSTRACT: The mastication of 7 differently prepared apple samples (raw pieces peeled and unpeeled, sliced, grated, cooked pieces with and without peel, and half-cooked pieces, 10 g each) was evaluated using electromyography (EMG). Eleven subjects participated in the EMG recording of both sides of the masseter and temporal muscles while eating samples normally. Only the grated sample reduced the number of chewing strokes and muscle activity before swallowing. In contrast, the thin apple slices produced significantly shorter contraction duration and cycle time only during the 1st 5 chewing strokes. The EMG duration and cycle in subsequent chews, as well as the other parameters, did not significantly differ between slices and pieces. Cooked apples exhibited significantly lower EMG amplitude and muscle activity per chew than their raw counterparts; however, there was no evidence of reduced total muscle activity required for swallowing. Raw and cooked apples with peel yielded significantly greater EMG amplitude and longer duration than those without peel. These findings suggest that appropriate preparation is necessary for people with various mastication abilities: grated for very low ability, cooked for those with weak chewing force, and unpeeled for mastication training.     

Prediction model of time diversity using Japan rain radar data

The effects of rain attenuation on communication systems will become more pronounced in future satellite communication systems, especially with the planned use of the 21‐GHz band or higher‐frequency bands. Diversity techniques provide a solution to mitigate rain attenuation effects. This study proposes a time diversity technique, one such technique that is likely to demonstrate high effectiveness. To model the system, rainfall rate statistics are necessary, and reliability is improved as the amount of statistical data increases. This paper derives the cumulative distribution of the rainfall rate across Japan over 4 years using rain radar data from the automated meteorological data acquisition system and ground‐based rain radar network and evaluates the rainfall rate at 23 observation points across Japan. We carry out a performance evaluation for all locations within Japan to confirm the efficiency of the time diversity method. Finally, we propose prediction model of the time diversity gain for Japan and other significant parameter which is time correlation of rainfall rate that was found from the time diversity results for further investigation. Copyright © 2016 John Wiley & Sons, Ltd.