Thickness estimation of interface films formed on Li1−xCoO2 electrodes by hard X-ray photoelectron spectroscopy

Solid electrolyte interface (SEI) films formed on Li_1−xCoO₂ electrodes were observed with hard X-ray photoelectron spectroscopy (HX-PES). This paper particularly focuses on film thickness estimation using HX-PES with theoretical calculation. The validity of the calculation was proven by experiments using model SEI films. The native film formed on a LiCoO₂ composite electrode was estimated to be LiF with its thickness of 5 nm. Formation of Co (II) species on top of LiCoO₂ was also indicated. Storage of the electrode at 60 °C brought about considerable film growth (30-40 nm) with carbonate compounds formation. SEI film changes during charging of the LiCoO₂ electrode were also examined. The main component in the film was deduced to be LiF or a kind of fluorite, with its thickness decreased during charging. The SEI formation mechanisms are also elucidated.     

Rotary scanning wireless temperature measurement method for hyperthermia using ferromagnetic implants

Recently, the use of a ferromagnetic material in a soft‐heating method has garnered much attention as a novel method for cancer treatment. By concurrently using this material as a thermal probe, we are currently developing a minimally invasive heating and wireless temperature measurement system. To make the approach feasible in a clinical setting, it is vital to overcome the key challenge of heating the local tumor at a constant temperature. In previous conventional approaches, it was necessary to switch the induction‐heating power supply on/off after the target tumor temperature was reached. However, it cannot determine the temperature of the material during the power‐off period. Therefore, we changed this approach and found that by adjusting the distance between the heating coil and the material while maintaining a constant current flow in heating coil, the drift problem, which happened just after power is supplied during the on/off operation, did not occur any longer. Accordingly, it was not required to use multiple sensors to reduce the drift, thereby minimizing the cost. This study verifies the validity of our wireless thermometry approach while performing rotary scanning and proposes a technique for determining achievement of the target temperature. This knowledge complements other approaches for cancer treatment utilizing hyperthermia. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Adaptive B‐spline neural network‐based vector control for a grid side converter in wind turbine‐DFIG systems

This paper presents a novel control system design for the grid‐side converter of doubly fed induction generator wind power generation systems. The control method proposed in this work is a vector control based on adaptive B‐spline neural network by using a simple fixed‐gain stabilizing control topology. The adaptive control is designed both for inner current loops and an outer DC‐link voltage loop of the grid side converter control system. To guarantee the control stability, the weights updating rule for the B‐spline neural network is synthesized by utilizing Lyapunov's direct method. To verify the effectiveness of the proposed control system, extensive simulations are performed using MATLAB/Simulink. Based on the simulation results, it is concluded that the proposed controller has improved performance compared to an optimum proportional integral control system. It is also relatively robust against external disturbances and variations of the control parameters. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

A new implementation of PID‐type fuzzy controller for a battery grid‐supporting inverter in an autonomous distributed variable‐speed wind turbine

This paper presents a new implementation of a proportional‐integral‐derivative (PID)‐type fuzzy controller (PIDfc) for a battery grid‐supporting inverter to regulate the frequency and voltage of an autonomous distributed variable‐speed wind turbine (VSWT). The VSWT which drives a permanent magnet synchronous generator (PMSG) is assumed for demonstration. The PIDfc is built from a set of control rules that adopts the droop control method and uses only locally measurable frequency and voltage signals. The output control signals are determined from the knowledge base and the fuzzy inference. To ensure safe battery operating limits, we also propose a protection scheme called intelligent battery protection (IBP). Several simulation experiments are performed by using MATLAB/SimPowerSystems. Next, to verify the scheme's effectiveness, the simulation results are compared with the results of a conventional controller through some performance indices. The results demonstrate the effectiveness of the PIDfc scheme to control a grid‐supporting inverter of battery in the reduction of frequency and voltage fluctuations. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Analysis of Plasmalogen Species in Foodstuffs

Ethanolamine plasmalogen (PlsEtn), which is present at high levels in brains, is believed to be involved in neuronal protection. The present study was performed to search for PlsEtn resources in foodstuffs. The foodstuffs examined showed a wide range of PlsEtn contents from 5 to 549 μmol/100 g wet wt. The marine invertebrates, blue mussel, and ascidian had high PlsEtn contents (over 200 μmol/100 g wet wt). Profiling of the molecular species showed that the predominant fatty acids of PlsEtn species were 20:5 (EPA) and 22:6 (DHA) at the sn‐2 position of the glycerol moiety in marine foodstuffs, whereas major PlsEtn species in land foodstuffs were 20:4. Following quantitative analysis by multiple reaction monitoring, the ascidian viscera were shown to contain the highest levels of 18:0/20:5‐PlsEtn and 18:0/22:6‐PlsEtn (86 and 68 μmol/100 g wet wt, respectively). In order to evaluate a neuronal antiapoptotic effect of these PlsEtn species, human neuroblastoma SH‐SY5Y cells were treated with ethanolamine glycerophospholipid (EtnGpl), purified from the ascidian viscera, under serum starvation conditions. Extrinsic EtnGpl from ascidian viscera showed stronger suppression of cell death induced by serum starvation than with bovine brain EtnGpl. The EtnGpl from ascidian viscera strongly suppressed the activation of caspase 3. These results suggest that PlsEtn, especially that containing EPA and DHA, from marine foodstuffs is potentially useful for a therapeutic dietary supplement preventing neurodegenerative diseases, such as Alzheimer's disease (AD).     

Influence of electrolytes on the photovoltaic performance of organic dye-sensitized nanocrystalline TiO2 solar cells

We have studied the influence of electrolytes on the photovoltaic performance of mercurochrome-sensitized nanocrystalline TiO₂ solar cells using LiI, LiBr, and tetraalkylammonium iodides as the electrolyte. Short-circuit photocurrent density (J_sc) and open-circuit photovoltage (V_oc) depended strongly on the electrolyte. J_sc of 3.42 mA cm⁻² and V_oc of 0.52 V were obtained for the LiI electrolyte and J_sc of 2.10 mA cm⁻² and V_oc of 0.86 V were obtained for the Pr₄NI electrolyte. This difference in photovoltaic performance was due to the change in the conduction band level of the TiO₂ electrode. Large V_oc of 0.99 V was obtained for the LiBr electrolyte due to the large energy gap between the conduction band level of TiO₂ and the Br/Br₂ redox potential. Solar cell performance also depended strongly on organic solvent, suggesting that the physical properties of solvents such as Li ion conductivity and donor number affect photovoltaic performance.     

Syntheses of group 4 transition metal complexes bearing 2-pyridinethiolate ligands and their catalytic activities for ethylene polymerization

Titanium bis(2-pyridinethiolate) complexes, Ti(6-R-SPy)₂(NMe₂)₂ (6-R-SPy = 6-R-2-pyridinethiolate, 3a: R = H; 3b: R = Me; 3c: R = Ph; 3d: R = C₆H₄-4-Me; 3e: R = C₆H₄-4-t-Bu; 3f: R = C₆H₃-3,5-Me₂), and the titanium bis(2-pyridinolate) complexes, Ti(6-Ph-OPy)₂(NMe₂)₂ (6-Ph-OPy = 6-phenyl-2-pyridinolate, 8) were prepared by treating Ti(NMe₂)₄ with 2 equiv. of 6-R-2-pyridinethiol or 6-Ph-2-pyridinol. The cis-configuration of the diamido moieties in the pseudo octahedral geometry was elucidated by X-ray crystallography for 3a. Reaction of M(NMe₂)₄ (M = Ti, Zr) with 4 equiv. of 2-pyridinethiol cleanly gave tetrakis(pyridinethiolate) complexes, M(6-H-SPy)₄·THF (6: M = Ti; 7: M = Zr). The triangular dodecahedral geometries of 6 and 7 were also revealed by X-ray crystallography. These complexes catalyzed ethylene polymerization upon activation with MAO (methylaluminoxane) or MMAO (modified MAO). The catalytic activities of titanium bis(6-aryl-pyridinethiolate) systems were found to be remarkably higher than that of titanium bis(6-methyl-pyridinethiolate) system. Among the complexes synthesized in this study, Ti[6-(C₆H₃-3,5-Me₂)-SPy]₂(NMe₂)₂ (3f)/MMAO showed the highest activity (1200 kg/Ti-mol h atm) for ethylene polymerization at 60 °C under atmospheric pressure. In contrast, the activity of the corresponding 6-aryl-pyridinolate system 8/MMAO was rather low (9.3 kg/Ti-mol h atm). Both the N-S chelating structure and the bulky aryl substituents are essential for the high activities of the 6-aryl-pyridinethiolate complexes.     

Microbial degradation of cyanobacterial cyclic peptides

Bacterial strain B-9 possesses hydrolytic enzymes capable of degrading microcystins (MCs) and nodularin that are toxic cyclic peptides produced by cyanobacteria. In the present study, the degradation activities of the cell extract of B-9 against non-toxic cyanobacterial cyclic peptides other than the MCs and nodularin were investigated, and the degradation products were analyzed by liquid chromatography/ion trap tandem mass spectrometry (LC/ITMS). It was confirmed that B-9 could also degrade these cyanobacterial cyclic peptides by hydrolysis of their peptide bonds. These results indicated that this bacterium possesses a very unique hydrolytic activity that can degrade structurally different cyclic peptides and that this may be effective for the detoxification of hazardous cyclic peptides.     

Polyacene capacitors

We fabricated two types of polyacene capacitor with extremely stable polyacenic semiconductor (PAS) as the positive and negative electrodes. The first one is a coin-type PAS capacitor (six different sizes), which possesses large capacity with high reliability. Its capacity is much larger than that of the conventional electric double-layer capacitor which uses activated carbon as electrode. PAS capacitor can maintain more than 70% of the initial capacity even after 100 000 cycles. Moreover, this capacitor can be charged and discharged in a few minutes as well as at low rate. The second one is a cylinder-type PAS capacitor (diameter: 18 mm, height: 65 mm) which shows high capacity of 100 F and can discharge at the extremely high rate of 80 C. The coin-type PAS capacitor is currently used for memory back-up of electrical and communication equipment, and the cylinder-type is considered to be useful as power back-up for starting drive parts of electric equipment which needs high power density.