Ribotyping and a study of transmission of Staphylococcus aureus collected from food preparation facilities

Food poisoning from Staphylococcus aureus is sometimes caused by improper handling of food items in food preparation facilities. Prevention of contamination by employees is particularly important in facilities where a significant amount of food preparation is performed by hand. Some experiments have been performed to describe bacterial cross-contamination in the food preparation process, but there have been few studies of cross-contamination in actual food preparation facilities. Aiming to shed light on the transmission of S. aureus in food preparation facilities, this study collected samples of 66 strains of this bacterium from the fingers of food preparation staff, foodstuffs, prepared foods, cooking utensils, and cooking equipment and typed them with the ribotyping method. S. aureus from the same ribogroup was detected on the hands of a study participant, a faucet, knife, frying pan, and a salad, indicating that bacteria found on the hands of the study participant was transmitted to cooking utensils and prepared foods. Transmission (from a faucet to a frying pan handle) of bacteria by another person, a third party, was also detected.     

An economic evaluation of recombinant bovine somatotropin approval in Japan

A comprehensive econometric model was developed to evaluate potential impacts of recombinant bovine somatotropin (rbST) approval in Japan. Three novel features of the analyses include 1) investigation of impact of rbST on herd-size structure, 2) determination of economic feasibilities of rbST adoption by herd size, and 3) evaluation of policies to mitigate negative effects of rbST approval. Simulation analysis was conducted over a 10-yr projected period assuming rbST was approved in Japan in 2001. Nine hypothetical scenarios were simulated to examine sensitivity of simulation results. Simulation results indicate that rbST approval would accelerate structural change in Japan's dairy industry toward fewer, larger farms. Negative effects of rbST on farm income are projected to be more severe for smaller farms, because of higher costs, lower profit-earning ability, lower milk yields, and lower adoption rates of rbST. Larger farms benefit from rbST adoption if milk demand is maintained. However, if concerns about rbST induce significant milk demand decreases, even the largest farms' income and cow numbers will decrease. Thus, Japan's dairy industry could be caught in a double downward spiral of declining milk prices and production. Assuming rbST is approved, small farms would benefit by using the technology, but they fare best if rbST is not approved. Two policies could be effective in mitigating possible farm income losses. First, lost farm income can be offset if dairy cooperatives can exercise greater market power to control fluid milk marketings. Second, because generic milk advertising has positive effects on both milk demand and farm income, increasing check-off rates to fund more advertising could ease farm income losses.     

Effect of Impurities on the Electronic Structure of Vortex Core Investigated by Microwave Surface Impedance Measurement

We investigated the microwave surface impedance in Zn doped YBa₂Cu₃O _y . For low Zn concentrations, crossover frequency _p and viscosity of vortex do not change significantly (at maximum, factor of 2). This is in sharp contrast to the dramatic change in the zero-field quasiparticle scattering time. The robust nature of viscosity on the impurity doping suggests that the quasiparticle scattering time in the vortex core is determined by a different mechanism from that outside the core.     

Second-Order Approximation for DOA Estimation of Near-Field Sources

The direction-of-arrival estimation of near-field sources can be formulated as a multidimensional nonlinear optimization problem, where a performance index is minimized with respect to azimuth, range, and source power. For the single source case, under the assumption that the range is relatively larger than the interelement distance, we use the second-order approximation to derive a simpler performance index parameterized by azimuth only. The minimization of the new index is easier than that of the original one parameterized by azimuth, range, and source power. Moreover, the proposed method considers the degradation of signal powers, giving more accurate estimation results. Also for the multiple source case, an efficient computation method is developed by using the second-order approximation.     

Electron microscopic observation of 137Cs-irradiated rat testis: production of basal laminae for germ cells, despite their absence

Whole body gamma-ray irradiation of rats with caesium-137 (137Cs) at embryonic day 20 induced marked reduction of the weight of the testis. Body weight and other tissues, however, seemed to remain normal. By light microscopy, complete loss of germ cells was observed in the testis. Other components, such as Sertoli cells and interstitial cells, seemed to be normal. The testes from day 8 postpartum rats contained very few spermatogonia compared with newborn rats, indicating loss of germ cells between days 0 and 8. In the adult, 137Cs-irradiated testes showed two conspicuous features other than the loss of germ cells: empty vacuolar spaces between Sertoli cells and multilayered seminiferous tubule basal laminae (lamina densa). The junctional structures (ectoplasmic specializations) between Sertoli cells, however, seemed normal. The thickness of each layer of multilayered basal laminae was the same as that of normal rats and electron-lucent layers similar to lamina lucida were interposed between them. Of the empty vacuolar spaces between Sertoli cells, basal laminae bridge the gap. The basal laminae contained laminin, type IV collagen and heparan sulphate proteoglycan evenly distributed among layers, suggesting a normal composition. Rough estimation of the amount of basal laminae deposited in 137Cs-irradiated rats indicates that it is within a range similar to that in normal testis. These features imply that Sertoli cells are, in part, determined perinatally to produce basal laminae for germ-line cells.     

Numerical Study of C–V Characteristics of Double-Gate Ultrathin SOI MOSFETs

Capacitance-voltage (C-V) characteristics of double-gate ultrathin silicon-on-insulator (SOI) MOSFETs are numerically investigated in detail. The measured back-gate bias dependence is reproduced by the Poisson-Schrodinger solver including the highly precise physical models for many-body interactions of carrier-carrier and carrier-ion, and for incomplete ionization of doping impurities in whole semiconductor regions of n⁺poly-Si/oxide/SOI/oxide/p-Si capacitor including the volume inversion. In addition, we study the higher subband effect at higher temperature in detail, in order to deduce the impacts of self-heating and nonstatic transport     

Piezoelectric properties in (K0.5Bi0.5)TiO3-(Na0.5Bi0.5)TiO3-BaTiO3 lead-free ceramics.

Lead-free piezoelectric ceramics with compositions around the morphotropic phase boundary (MPB) x(Na0.5Bi0.5)TiO3-y(K0.5Bi0.5)TiO3-zBaTiO3 [x + y + z = 1; y:z = 2:1] were synthesized using conventional, solid-state processing. Dielectric maximum temperatures of 280 degrees C and 262 degrees C were found for tetragonal 0.79(Na0.5Bi0.5)TiO3-0.14(K0.5Bi0.5)TiO3-0.07BaTiO3 (BNBK79) and MPB composition 0.88(Na0.5Bi0.5)TiO3-0.08(K0.5Bi0.5)TiO3-0.04BaTiO3 (BNBK88), with depolarization temperatures of 224 degrees C and 162 degrees C, respectively. Piezoelectric coefficients d33 were found to be 135 pC/N and 170 pC/N for BNBK79 and BNBK88, and the piezoelectric d31 was determined to be -37 pC/N and -51 pC/N, demonstrating strong anisotropy. Coercive field values were found to be 37 kV/cm and 29 kV/cm for BNBK79 and BNBK88, respectively. The remanent polarization of BNBK88 (approximately 40 microC/cm2) was larger than that of BNBK79 (approximately 29 microC/cm2). The piezoelectric, electromechanical, and high-field strain behaviors also were studied as a function of temperature and discussed.     

Phase-transition temperatures and piezoelectric properties of (Bi1/2Na1/2)TiO3-(Bi1/2Li1/2)TiO3-(Bi1/2K1/2)TiO3 lead-free ferroelectric ceramics.

The phase-transition temperatures and piezoelectric properties of x(Bi(1/2)Na(1/2))TiO3-y(Bi(1/2)Li(1/2))TiO3-z(Bi(1/2)K(1/2))TiO3 [x + y + z = 1] (abbreviated as BNLKT100(y)-100(z)) ceramics were investigated. These ceramics were prepared using a conventional ceramic fabrication process. The phase-transition temperatures such as depolarization temperatures T(d), rhombohedraltetragonal phase transition temperature T(R-T), and dielectric-maximum temperature T(m) were determined using electrical measurements such as dielectric and piezoelectric properties. The X-ray powder diffraction patterns of BNLKT100(y)-100(z)) show the morphotropic phase boundary (MPB) between rhombohedral and tetragonal at approximately z = 0.20, and the piezoelectric properties show the maximum at the MPB. The electromechanical coupling factor k(33), piezoelectric constant d(33) and T(d) of BNLKT4-20 and BNLKT8-20 were 0.603, 176 pC/N, and 171 degrees C, and 0.590, 190 pC/N, and 115 degrees C, respectively. In addition, the relationship between d33 and Td of tetragonal side and rhombohedral side for BNLKT4-100z and BNLKT8-100z were presented. Considering both high Td and high d(33), the tetragonal side of BNLKT4-100z is thought to be the superior composition. The d(33) and T(d) of BNLKT4-28 were 135 pC/N and 218 degrees C, respectively. Moreover, this study revealed that the variation of T(d) is related to the variation of lattice distortion such as rhombohedrality 90-alpha and tetragonality c/a.