Designing Metallic and Insulating Nanocrystal Heterostructures to Fabricate Highly Sensitive and Solution Processed Strain Gauges for Wearable Sensors

All‐solution processed, high‐performance wearable strain sensors are demonstrated using heterostructure nanocrystal (NC) solids. By incorporating insulating artificial atoms of CdSe quantum dot NCs into metallic artificial atoms of Au NC thin film matrix, metal–insulator heterostructures are designed. This hybrid structure results in a shift close to the percolation threshold, modifying the charge transport mechanism and enhancing sensitivity in accordance with the site percolation theory. The number of electrical pathways is also manipulated by creating nanocracks to further increase its sensitivity, inspired from the bond percolation theory. The combination of the two strategies achieves gauge factor up to 5045, the highest sensitivity recorded among NC‐based strain gauges. These strain sensors show high reliability, durability, frequency stability, and negligible hysteresis. The fundamental charge transport behavior of these NC solids is investigated and the combined site and bond percolation theory is developed to illuminate the origin of their enhanced sensitivity. Finally, all NC‐based and solution‐processed strain gauge sensor arrays are fabricated, which effectively measure the motion of each finger joint, the pulse of heart rate, and the movement of vocal cords of human. This work provides a pathway for designing low‐cost and high‐performance electronic skin or wearable devices.     

Thermally Controlled,Patterned Graphene Transfer Printing for Transparent and Wearable Electronic/Optoelectronic System

Graphene has been highlighted as a platform material in transparent electronics and optoelectronics, including flexible and stretchable ones, due to its unique properties such as optical transparency, mechanical softness, ultrathin thickness, and high carrier mobility. Despite huge research efforts for graphene‐based electronic/optoelectronic devices, there are remaining challenges in terms of their seamless integration, such as the high‐quality contact formation, precise alignment of micrometer‐scale patterns, and control of interfacial‐adhesion/local‐resistance. Here, a thermally controlled transfer printing technique that allows multiple patterned‐graphene transfers at desired locations is presented. Using the thermal‐expansion mismatch between the viscoelastic sacrificial layer and the elastic stamp, a “heating and cooling” process precisely positions patterned graphene layers on various substrates, including graphene prepatterns, hydrophilic surfaces, and superhydrophobic surfaces, with high transfer yields. A detailed theoretical analysis of underlying physics/mechanics of this approach is also described. The proposed transfer printing successfully integrates graphene‐based stretchable sensors, actuators, light‐emitting diodes, and other electronics in one platform, paving the way toward transparent and wearable multifunctional electronic systems.     

GaN HEMT reliability

This paper reviews the experimental evidence behind a new failure mechanism recently identified in GaN high-electron mobility transistors subject to electrical stress. Under high voltage, it has been found that electrically active defects are generated in the AlGaN barrier or at its surface in the vicinity of the gate edge. These defects reduce the drain current, increase the parasitic resistance and provide a path for excess gate current. There is mounting evidence for the role of the inverse piezoelectric effect in introducing mechanical stress in the AlGaN barrier layer and eventually producing these defects. The key signature of this mechanism is a sudden and non-reversible increase in the gate leakage current of several orders of magnitude. This degradation mechanism is voltage driven and characterized by a critical voltage below which degradation does not occur. This hypothesis suggests several paths to enhance the electrical reliability of GaN HEMTs which are borne out by experiments.     

Multiaxial and Transparent Strain Sensors Based on Synergetically Reinforced and Orthogonally Cracked Hetero‐Nanocrystal Solids

Wearable strain sensors are widely researched as core components in electronic skin. However, their limited capability of detecting only a single axial strain, and their low sensitivity, stability, opacity, and high production costs hinder their use in advanced applications. Herein, multiaxially highly sensitive, optically transparent, chemically stable, and solution‐processed strain sensors are demonstrated. Transparent indium tin oxide and zinc oxide nanocrystals serve as metallic and insulating components in a metal–insulator matrix and as active materials for strain gauges. Synergetic sensitivity‐ and stability‐reinforcing agents are developed using a transparent SU‐8 polymer to enhance the sensitivity and encapsulate the devices, elevating the gauge factor up to over 3000 by blocking the reconnection of cracks caused by the Poisson effect. Cross‐shaped patterns with an orthogonal crack strategy are developed to detect a complex multiaxial strain, efficiently distinguishing strains applied in various directions with high sensitivity and selectivity. Finally, all‐transparent wearable strain sensors with Ag nanowire electrodes are fabricated using an all‐solution process, which effectively measure not only the human motion or emotion, but also the multiaxial strains occurring during human motion in real time. The strategies can provide a pathway to realize cost‐effective and high‐performance wearable sensors for advanced applications such as bio‐integrated devices.     

RFID Transponder Collision Control Algorithm

Transponder collision problem can be significant when a large number of RFID (radio frequency identification) transponders exist in field. Most existing anti-collision algorithms can solve this problem. However, problem arises when all or part of these transponders are having identical UID (unique identification). This paper proposes a new transponder collision control algorithm to overcome overlapping that occurs among transponders with identical UID in RFID large scale deployment (e.g., in a large warehouse), so that the RFID reader can successfully identify the quantity of transponders for each particular UID with high identification accuracy. The proposed anti-collision algorithm adopts a modified version of frequency domain method by adding stochastic delays in time domain. The obtained results show that the proposed method can achieve optimum frequency bandwidth utilization and at the same time poses high identification accuracy (almost 100%) with low identification delay.     

Effect of functional groups of carbon nanotubes on the cyclization mechanism of polyacrylonitrile (PAN)

The cyclization mechanism of polyacrylonitrile (PAN) in PAN/functionalized carbon nanotube (CNT) composites was examined. The surface functionalization of CNTs was carried out by using diazonium reagents with 4-substituted aniline. The results strongly suggest that the type of functional groups on the CNTs strongly influences the cyclization mechanism of PAN during the stabilization process. The nitrile of PAN in F–Ph–CNT/PAN composite was cyclized through the free radical reaction during thermal stabilization whereas nitrile of PAN in COOH–Ph–CNT/PAN composite underwent cyclization via the ionic reaction due to the acid groups on the surfaces of the CNTs. The fluoro functional groups on the CNTs can act as effective external initiators for nitrile cyclization in homo PAN, in contrast to acid functional groups. Consequently, a lower cyclization temperature (265 °C) and enthalpy value (688 J/g) of F–Ph–CNT were shown compared to those of homo PAN.     

Caenorhabditis elegans has two isozymic forms, CE-1 and CE-2, of fructose-1,6-bisphosphate aldolase which are encoded by different genes

Two distinct types of cDNAs for fructose-1,6-bisphosphate (FBP) aldolase, Ce-1 and Ce-2, have been isolated from nematode Caenorhabditis elegans, and the respective recombinant aldolase isozymes, CE-1 and CE-2, have been purified and characterized. The Ce-1 and Ce-2 are 1282 and 1248 bp in total length, respectively, and both have an open reading frame of 1098 bp, which encodes 366 amino acid residues. The entire amino acid sequences deduced from Ce-1 and Ce-2 show a high degree of identity to one another and to those of vertebrate and invertebrate aldolases. The highest sequence diversity was found in the carboxyl-terminal region that corresponds to one of the isozyme group-specific sequences of vertebrate aldolase isozymes that play a role in determining isozyme-specific functions. Southern blot analysis suggests that CE-1 and CE-2 are encoded by different genes. Concerning general or kinetic properties, CE-2 is quite different from CE-1. CE-1 exhibits unique characteristics which are not identical to any aldolase isozymes previously reported, whereas CE-2 is similar to vertebrate aldolase C. These results suggest that CE-2 might preserve the properties of a progenitor aldolase with a moderate preference for FBP over fructose 1-phosphate (F1P) as a substrate, whereas CE-1 evolved to act as an intrinsic enzyme that exhibits a much broader substrate specificity than dose CE-2.     

Evaluation of method for simultaneous determination of pesticide residues in fruits and vegetables by collaborative study

A collaborative study involving 8 laboratories was conducted to evaluate a method for the simultaneous determination of pesticide residues in 6 types of fruits and vegetables (spinach, tomato, apple, radish, cabbage and carrot). The method of analysis was the same as reported by Kakimoto et al. in 2003. One hundred and thirty-nine pesticides were spiked by each of 8 laboratories at levels of 0.1 microg/g (pesticides analyzed by GC/MS) or 0.5 microg/g (pesticides analyzed by HPLC) into the 6 kinds of samples. Statistical analysis showed that 111 pesticides could be analyzed with practical precision by this method. For screening purposes, the method could analyze 118 pesticides. The median values of the limits of detection were 0.001-0.041 microg/g. The calibration curves were linear in the range of 0.5-5 microg/mL for most pesticides with median correlation coefficients of 0.983-1.000.     

Effect of transition metal doping on the sintering and electrochemical properties of GDC buffer layer in SOFCs

A dense Ce_0.9Gd_0.1O_2−d (GDC) interlayer is an essential component of the SOFCs to inhibit interfacial elemental diffusion between zirconia-based electrolytes (eg YSZ) and cathodes. However, the characteristic high sintering temperature of GDC (>1400°C) makes it challenging to fabricate an effective highly dense interlayer owing to the formation of more resistive (Zr,Ce)O₂ interfacial solid solutions with YSZ at those temperatures. To fabricate a useful GDC interlayer, we studied the influence of transition metal (TM) (Co, Cu, Fe, Mn, & Zn) doping on the sintering and electrochemical properties of GDC. Dilatometry data showed dramatic drops in the necking and final sintering temperatures for the TM-doped GDCs, improving the densification of the GDC in the order of Fe > Co > Mn > Cu > Zn. However, the electrochemical impedance data showed that among various transition metal dopants, Mn doping resulted in the best electrochemical properties. Anode supported SOFCs with Mn-doped, nano, and commercial-micron GDC interlayers were compared with regard to their performance and stability levels. Although all of the SOFCs showed stable performance, the SOFC with the Mn-doped GDC interlayer showed the highest power density of 1.14 W cm⁻² at 750°C. Hence, Mn-doped GDC is suggested for application as an effective diffusion barrier layer in SOFCs.