Synthesis,structure, and thermal behavior of [Cu70Se35(PEt2Ph)24]

We investigated the molecular and crystal structure as well as the thermal behavior of [Cu₇₀Se₃₅(PEt₂Ph)₂₄] using single-crystal X-ray diffraction, high-resolution transmission electron microscopy (HRTEM), X-ray powder diffractometry, and thermal gravimetric analysis (TGA). The use of a He-cooled sample head in HRTEM makes possible for the first time the investigation of semiconductor cluster molecules under the extreme conditions of the experiment and, thus, comparison with the results of single-crystal X-ray diffraction. The lattice spacings and packing symmetry of the three-dimensional cluster molecule superlattice found in HRTEM are in good agreement with the ones determined by X-ray structure diffraction. The atomic ordering inside the cluster molecules, which resembles a hexagonal packing of the selenium atoms, could not be resolved in the HRTEM measurements, since upon irradiation with the electron beam the clusters start to move after a few seconds and the images go out of focus. This movement is possibly affected by cleavage processes of the phosphine ligands, as could be observed in thermal gravimetric analysis under comparably mild conditions. Powder diffraction measurements show that this cleavage of ligand molecules is accompanied by the formation of larger copper selenide cluster cores and ends up at high temperatures in the formation of bulk α-Cu₂Se.     

A Versatile Computer Simulation Model for Rotary Regenerative Heat Exchangers

A simulation technique for predicting the thermal performance of rotary regenerative heat exchangers, in particular those used for heating the intake air to power station boilers, has been developed and verified by means of site measurements. Various geometries of both rotating-hood and rotating-matrix types of air heaters can be accommodated in the simulation model, including packings of corrugated steel plates of various specified profiles and any given thicknesses and lengths in the flow direction. Rotational speed, leakage, blockage, and non-uniform inlet flow distribution may be taken into account as input variables. The heat transfer and pressure drop correlations for the various plates considered, which also form part of the input data, were determined experimentally using a single-blow transient test facility, constructed as part of this research program. The effect of erosion of the plates by fly ash particles carried in the outlet flue gas on heat transfer performance is also considered, and experimental results show that erosion has little effect on the thermal performance (up to the point that structural integrity is about to be compromised), but also that the pressure drop is reduced.     

Detection of DNA sequence variations in homo- and heterozygous samples via molecular mass measurements by electrospray ionization time-of-flight mass spectrometry

The potential of ion-pair reversed-phase high-performance liquid chromatography on-line hyphenated to electrospray ionization time-of-flight mass spectrometry for the characterization of polymerase chain reaction (PCR) amplified nucleic acids was evaluated. For that purpose, a "SNP toolbox" was constructed by cloning and PCR-mediated site-directed in vitro mutagenesis at nucleotide position (ntp) 16,519 of a sequence-verified fragment of the human mitochondrial genome (ntps 15,900-599). Confirmatory sequencing demonstrated that within the sequences of the clones one and the same base was mutated to all other bases. Using these clones or equimolar mixtures of these clones as PCR templates, 51-401-bp-long amplicons were generated, which were used to determine the upper size limits of PCR products for the unequivocal detection of sequence variations in homo- and heterozygous samples. Based on the high mass spectrometric performance of the applied time-of-flight mass spectrometer, the unequivocal genotyping of all kinds of single base exchanges in PCR amplicons from heterozygous samples with lengths up to 254 base pairs (bp) was demonstrated. Considering homozygous samples, the successful genotyping of single base substitutions in up to 401-bp-long PCR products was possible. Consequently, the described hyphenated technique represents one of the most powerful mass spectrometric genotyping assays available today.     

One-bath dyeing of wool/polyester blends with acid and disperse dyes. Part 2 — disperse dye distribution on polyester and wool

Disperse dye distribution on polyester and wool during one-bath dyeing of wool/polyester blends is discussed. The addition of carriers increases the wool's intrinsic saturation value for disperse dye, thus raising the degree of staining on the wool component at the low dye uptakes. However, staining can be minimised if the dyeing is close to or attains equilibrium conditions. Sequestering agents can accelerate the disperse dye diffusion out of the wool fibre, further reducing staining on wool and transferring more disperse dyes from wool to polyester. Citric acid can be used as a sequestering agent as well as a pH adjusting agent.     

Dislocation creep controlled superplasticity in the high carbon steel 140NiCr16-6

Superplasticity in the alloyed high carbon-steel 140NiCr16-6 with phosphorus additions and a fine grained microdupiex structure – containing cementite in volume fractions of 22 % (Fe,Cr,Ni)₃C, particle size of about 1 μm and with a medium ferrite grain size of about 2 μm – has been investigated in the temperature regime of 550 to 675°C and in the strain rate range of 10^?5 to 5 · 10^?2 s^?1. Maximum strain rate exponents of m = 0,45 at 675°C with strain rates of the order of 10^?4 s^?1 have been determined. Maximum superplastic elongations of about 700 % were detected. At higher strain rates of 10^?3 s^?1 superplastic elongations of about 570 % were achieved. At relatively low test temperatures of 550°C elongations up to 230 % were recorded. The activation analysis in the temperature regime of 550 to 650°C show an activation energy for superplastic flow of 250 ± 20 kJ/mol. This is in agreement with the activation energy for lattice self diffusion of iron in α-iron. Above 650°C the activation energy decreases to 70 kJ/mol. This is due to a stress induced decrease in the eutectoid α-γ-transformation temperature from 685°C to somewhat lower temperatures during superplastic deformation. The superplastic deformability (m > 0.3) of this steel in a wide strain rate range at relatively low temperatures above 550°C allows near net shape forming of complex parts applying low flow stresses.     

Development and application of oligonucleotide probes for in situ detection of thermotolerant Campylobacter in chicken faecal and liver samples

Based on Campylobacter 16S- and 23S-rRNA sequence data oligonucleotide probes specific for thermotolerant campylobacters and for members of the genus Campylobacter have been developed. The 16S-rRNA-targeted probe CAMP 653, recommended for a comprehensive detection of members of the genus Campylobacter, specifically detected all Campylobacter strains used in this study. Detection of thermotolerant species has been achieved by the 23S-rRNA-targeted probe CAJECO1427. Optimal hybridisation conditions have been derived for both probes from melting profiles of fluorescence-labelled probe-target hybrids recorded in fluorescence in situ hybridisation experiments (FISH). The FISH assay was evaluated both by spiking poultry faecal samples with Campylobacter jejuni and by detecting Campylobacter in naturally colonized chickens. C. jejuni was reliably detected at levels of 10(6) cfu/g faeces after a 3- h enrichment step in Blood Preston Selective broth. Low level contaminations (相似文献   

Effect of the water–steam phase transition on the electrical conductivity of porous rocks

The effect of the water–steam phase transition on electrical conductivity was experimentally investigated in volcanic and sandstone samples to support the interpretation of resistivity data to determine changes in steam saturation in geothermal reservoirs. The measurements were performed at simulated in situ conditions with controlled pore fluid chemistry, temperature, and confining and pore pressures. At constant temperature (150 °C) and confining pressure, pore fluid was withdrawn from the sample by steadily increasing the volume of the pore fluid system. At the vapor saturation pressure, the pore water progressively boiled to steam, resulting in a continuous conductivity decrease by a factor of approximately 20. The study showed that: (1) for rocks in which conduction is controlled by the pore fluid, the concurrent changes in both electrical conductivity and pore (vapor) pressure are defined by the pore size distribution; the changes in liquid–steam saturation are approximately proportional to those in conductivity and can thus be quantified; and (2) for rocks in which surface conduction is predominant there is no direct relation between conductivity, pore pressure and drained fluid volume; this implies that the conduction mechanism controls the pattern of electrical conductivity variations as steam saturation changes.     

Functional microbial diversity of the railway track bed

Railways constitute relatively unexplored microbial habitats. Little is known about the amounts, activities or distributions of microorganisms and their associated heterotrophic capabilities on railway embankments. The aim of this study was to investigate the microbiology of two Swedish railway tracks in order to fill some of the gaps in the available information. We estimated microbial biomass by means of substrate-induced respiration, microbial activity as basal respiration (BR) and as a kinetically derived parameter (r) hypothesised to correspond to the active fraction of the microbial biomass. It was confirmed that the microbial biomass and activity were low as compared with agricultural soils and that their distributions were distinctly positively skewed. Spatial Kriging revealed that covariance structures were sustained on a scale smaller than the employed sampling grid (<1 m). Substrate richness (SR), as measured with Biolog ECO plates, was used as a quantitative measure of functional diversity. SR correlated to microbial activity and SIR, indicating that functional traits were lacking where the microbial biomass was low or less active. The dependence of microbial activities on basic soil characteristics were inferred by separately designed general linear models. Water content was found to be the most important factor moderating basal respiration and functional diversity, whereas the organic matter content was identified as the most important covariate for SIR. Multivariate analysis of the carbon source utilisation patterns of the Biolog plates with equivalent average well-colour development revealed homogenous substrate utilisation among samples. This indicates that the microbial functional potential is randomly distributed in the railway track bed. In combination, our findings imply that the ecosystem functionality of railway embankments may be seriously hampered as compared with agricultural soils. This has consequences for the risk assessment of herbicides applied to railways.