Two-phase flow in a full-scale loop seal facility

An experimental program has been carried out to study two-phase behaviour of a PWR cold leg loop seal during loss-of-coolant accidents. The experimental facility comprises a full-scale cold leg with a reactor coolant pump simulator. Three separate air/water test series were performed to determine the onset of slugging in the horizontal pipe, the residual water mass and the total two-phase pressure drop in the loop seal.The results of flow regime transition experiments have been compared with smaller-scale experiments and with theoretical predictions to evaluate scaling criteria. The strong hysteresis of transitions found between the stratified and slug flow regimes depends on the loop seal geometry and U-tube oscillations.     

Lossless handover for wireless ATM

Handover is one of the key research topics for the emerging wireless ATM networks. This paper describes a handover mechanism for intra-switch handovers for wireless ATM. The handover procedure is simple enough to be implementable as a limited enhancement to ATM switch platforms for fixed network, yet provides low delay and lossless handover when used together with a suitable radio interface. The paper also reports on initial simulation result.     

On the Effect of the Form of the Posterior Approximation in Variational Learning of ICA Models

We show that the choice of posterior approximation affects the solution found in Bayesian variational learning of linear independent component analysis models. Assuming the sources to be independent a posteriori favours a solution which has orthogonal mixing vectors. Linear mixing models with either temporally correlated sources or non-Gaussian source models are considered but the analysis extends to nonlinear mixtures as well.     

Up-conversion mixers in a complementary 0.4 μm SiGe process

In this paper a 0.4 μm complementary SiGe process is used to fabricate up-conversion mixers for base-station applications. A current feedback mixer, and a mixer with a folded input, were designed in order to test benefits obtainable from the use of equally fast PNP- and NPN-transistors. The target was to improve linearity and to increase output compression point ( ) of the mixers. A +5 dBm output compression point @2 GHz was measured while drawing 43 mA from 5 V voltage supply. Harri Pellikka was born in Espoo, Finland, in 1980. He received the M.Sc. degree in electronics and electrical engineering from Helsinki University of Technology in 2005. He has been with Helsinki University of Technology Electronic Circuit Design Laboratory since 2003, where he works as research engineer. His research interests include the design of integrated circuits for telecommunication applications. Esa Tiiliharju was born in Rovaniemi, Finland, in 1966. He received the M.Sc. degree in information technology in 1995, and the Lic.Tech degree in electrical engineering in 1998, both from Helsinki University of Technology, Finland. He has joined the Microelectronics Laboratory in University of Turku in 2006. His research interests include the design of integrated circuits for telecommunication applications. Kari A. I. Halonen was born in Helsinki, Finland, on May 23, 1958. He received the M.Sc. degree in electrical engineering from Helsinki University of Technology, Finland, in 1982, and the Ph.D. degree in electrical engineering from the Katholieke Universiteit Leuven, in Heverlee, Belgium, in 1987. Since 1988 he has been with the Electronic Circuit Design Laboratory, Helsinki University of Technology. From 1993 he has been an associate professor, and since 1997 a full professor at the Faculty of Electrical Engineering and Telecommunications. He became the Head of Electronic Circuit Design Laboratory year 1998. From 1997 to 1999 he was an associate editor of IEEE Transactions on Circuits and Systems I. He has been a guest editor for IEEE Journal of Solid-State Circuits and the Technical Program Committee Chairman for European Solid-State Circuits Conference year 2000. He has been awarded the Beatrice Winner Award in ISSCC’02 Conference year 2002. He specializes in CMOS and BiCMOS analog integrated circuits, particularly for telecommunication applications. He is author or co-author over a hundred and fifty international and national conference and journal publications on analog integrated circuits. He has several patents on analog integrated circuits.     

Hyphenation of gas chromatography to microcoil 1H nuclear magnetic resonance spectroscopy

Whereas the hyphenation of gas chromatography (GC) with mass spectrometry is of great importance, little is known about the coupling to nuclear magnetic resonance spectroscopy (NMR). The investigation of this technique is an attractive proposition because of the valuable information given by NMR on molecular structure. The experiments shown here are to our knowledge the first hyphenating capillary GC to microcoil NMR. In contrast to liquids, gases have rarely been investigated by NMR, mainly due to the experimental difficulties in handling gases and the low signal-to-noise-ratio (SNR) of the NMR signal obtained at atmospheric pressure. With advances in NMR sensitivity (higher magnetic fields and solenoidal microprobes), this limitation can be largely overcome. In this paper, we describe the use of a custom-built solenoidal NMR microprobe with an active volume of 2 microL for the NMR detection of several compounds at 400 MHz, first in a mixture, and then with full coupling to capillary GC to identify them separately. The injected amounts of each analyte in the hyphenated experiments are in the range of 15-50 micromol, resulting in reasonable SNR for sample masses of 1-2 microg.     

Effects of Silage Fermentation and Post-ruminal Casein Supplementation in Lactating Dairy Cows: 1—Diet Digestion and Milk Production

Two silages were prepared from the first-cut sward of timothy-meadow fescue and wilted to a dry matter (DM) content of 300 g kg^-1. One was ensiled with the addition of a formic-acid-based additive (4 litres formic acid (FA) per tonne) and the other with the addition of a bacterial inoculant (LAB) at a rate of 5×10⁶ colony forming units g^-1. Both silages were well preserved, but the extent of fermentation was greater in LAB-silage than in FA-silage as indicated by a lower concentration of water soluble carbohydrates (68 vs 177 g kg^-1 DM) and a higher concentration of lactic acid (147 vs 32 g kg^-1 DM). Four Ayrshire cows were used in a 4×4 Latin square experiment with 21-day periods to study the effects of silage fermentation and postruminal casein supplementation on silage intake, nutrient supply and milk production. The four treatments were FA-silage without casein (FA-0), LAB-silage without casein (LAB-0), FA-silage with casein (FA-C) and LAB-silage with casein (LAB-C). Both silages were given ad libitum with 8 kg day^-1 of barley without or with 400 g day^-1 of casein infused into the duodenum. Organic matter digestibility was lower (0·723 vs 0·753; P<0·01) for FA-silage than for LAB-silage. Cows offered FA-silage had a higher molar proportion of acetate and a lower proportion of propionate in ruminal fluid than cows offered LAB-silage. Microbial protein synthesis estimated from the output of purine derivatives in urine was greater (288 vs 260 g N day^-1; P<0·05) for cows given FA-silage compared with LAB-silage. Feeding LAB-treated silage tended (P<0·10) to decrease silage DM intake compared with FA-treated silage (10·61 vs 11·77 kg DM day^-1). Silage composition did not affect significantly milk yield or milk composition. Casein infusion increased milk yield (25·1 vs 27·1 kg day^-1; P<0·05), milk protein content (32·4 vs 33·8 g kg^-1; P<0·05) and protein yield (808 vs 905 g day^-1; P<0·01). The responses were similar for both silages. © 1997 SCI.     

Parallel realizations of Kanerva's sparse distributed memory on a tree-shaped computer

This paper presents two parallel realizations of sparse distributed memory (SDM) on a tree-shaped computer. The original model of SDM is introduced in terms of generalized computer memory and artificial neural networks (ANNs). For parallellization purposes, addressing, storage and retrieval operations are explained in detail. Some existing implementations in various computing platforms are considered before introducing the tree-shaped parallel computer, TUTNC (Tampere University of Technology Neural Computer). Two mappings are given, each utilizing parallelism with different granularities, and compared in terms of measured execution time, task partitioning and load balancing. Performance estimates are given for a larger system. The results show that SDM can be well parallelized in TUTNC. © 1997 John Wiley & Sons, Ltd.     

Characteristics of dissolved organic matter in Baltic coastal sea ice: allochthonous or autochthonous origins?

The origin of dissolved organic matter (DOM) within sea ice in coastal waters of the Baltic Sea was investigated using parallel factor (PARAFAC) analysis of DOM fluorescence. Sea ice DOM had distinctly different fluorescence characteristics than that of the underlying humic-rich waters and was dominated by protein-like fluorescence signals. PARAFAC analysis identified five fluorescent components, all of which were present in both sea ice and water. Three humic components were negatively correlated to salinity and concluded to be terrestrially derived material. Baltic Sea ice DOM was found to be a mixture of humic material from the underlying water column incorporated during ice formation and autochthonous material produced by organisms within the ice. Dissolved organic carbon (DOC) and nitrogen (DON) concentrations were correlated to the humic fluorescence, indicating that the majority of the organic carbon and nitrogen in Baltic Sea ice is bound in terrestrial humic material trapped within the ice. This has implications for our understanding of sea ice carbon cycling in regions influenced by riverine input (e.g., Baltic and Arctic coastal waters), as the susceptibility of DOM to degradation and remineralization is largely determined by its source.     

On-line damage detection on a wing panel using transmission of multisine ultrasonic waves

Fatigue damage of materials is an important problem that causes a lot of failures in mechanical systems. It is very important to detect this fatigue as early as possible. Nowadays, most of the nondestructive testing methods are off-line: the inspection is carried out periodically and in some cases the device has to be dismounted. So we risk to exceed, for example, the critical length of a crack. In this article, an on-line method based on the variation in transmission of a multisine ultrasonic wave during opening and closing of a surface crack is developed. As a validation experiment, a propagation fatigue crack in a sinusoidally loaded wing panel is considered. It will be shown that the on-line method is very sensitive to crack propagation.     

Synthesis of poly(ester‐anhydride)s based on poly(ϵ‐caprolactone) prepolymer

The objective of this study was to prepare high molecular weight poly(ester‐anhydride)s by melt polycondensation. The polymerization procedure consisted of the preparation of carboxylic acid terminated poly(?‐caprolactone) prepolymers that were melt polymerized to poly(?‐caprolactone)s containing anhydride functions along the polymer backbone. Poly(?‐caprolactone) prepolymers were prepared using either 1,4‐butanediol or 4‐(hydroxymethyl)benzoic acid as initiators, yielding hydroxyl‐terminated intermediates that were then converted to carboxylic acid‐terminated prepolymers by reaction with succinic anhydride. Prepolymers were then allowed to react with an excess of acetic anhydride, followed by subsequent polycondensation to resulting high molecular weight poly(ester‐anhydride)s. Upon coupling of prepolymers, size exclusion chromatography analyses showed an increase from 3600 to 70,000 g/mol in number‐average molecular weight (M_n) for the 1,4‐butanediol initiated polymer, and an increase from 7200 to 68,000 g/mol for the 4‐(hydroxymethyl)benzoic acid‐initiated polymer. 4‐Hydroxybenzoic acid and adipic acid were also used as initiators in the preparation of poly(?‐caprolactone) prepolymers. However, with these initiators, the results were not satisfactory. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 176–185, 2001