Adaptive MAC Protocol for Solar Energy Harvesting Based Wireless Sensor Networks in Agriculture

The wireless sensor network is one of the promising technologies in the agriculture field. Its actual usage in real agriculture fields is limited by its dependence on the small batteries which cannot make the network survive for long. Various protocols are being designed at the network and MAC layer to increase the lifetime of the nodes, but up to a certain extent only. Hence the energy harvesting to power up the WSN nodes is a promising technology to fulfill this ever energy demand, but the protocols need to be redesigned for this scenario. Solar energy harvesting based MAC protocol which is adaptive to the changing weather conditions is designed in this paper for the smart agriculture applications. It is based on the multilayer and receiver-initiated process to improve network quality. It has shown the remarkable performance over the other energy harvesting based protocols in terms of ENO ratio, energy consumption and collision rate.

     

Analysis of Acquired Indoor LTE-A Data from an Actual HetNet Cellular Deployment

Wireless Personal Communications - Increasing the user downlink throughput is always a task of utmost importance for any cellular network service provider. However, most of the research is only...     

Influence of resonant Raman scattering in the elemental analysis using X-ray emission based techniques

A tabulation of characteristic X-ray energies across the periodic table are provided where those X-rays are expected to result in a significant fractional resonant Raman scattering (RRS) contribution to the X-ray attenuation from a particular shell/subshell of the same or another element. The tabulations can be considered as guideline so as to know what can be expected due to RRS in typical photon- and particle-induced X-ray emission spectrometry. The RRS contribution is not included in the available theoretical attenuation coefficients, which are generally used in estimation of the matrix corrections in routine quantitative elemental analysis based on various X-ray emission techniques. The radiative RRS peaks can also interfere with normal X-ray spectrum and influence the elemental analysis. The RRS cross-section depends upon the energy difference of the X-ray energy and the shell/subshell ionization threshold taken in the units of the shell/subshell energy width, density of available states near the Fermi level, and the band structure in case the element is in the solid form. Some aspects of the dependence of the RRS contribution on the chemical forms of the elements are also discussed.     

DRYING CHARACTERISTICS OF TAPIOKA

Experimcntal studies were carried out on a multipurposc industrial solar drycr having corrugated absorber with two glass covers. Drying charactcristics of Tapioka wcre obtained on the fixed bed portion of this dryer     

Structural and thermal characterization of macro-branched functional terpolymer containing 8-hydroxyquinoline moieties with enhancing biocidal properties

Novel polyfunctional acetyl and hydroxyl bearing functional terpolymer (HQFCA) derived from 8-hydroxyquinoline (HQ), 4-chloroacetophenone (CA) and formaldehyde (F) has been synthesized by complex condensation polymerization in the presence of an acid catalyst. The structure and morphology of terpolymer were elucidated by FTIR-ATR, one-dimensional NMR (¹H NMR, ¹³C NMR and DEPT-135 experiment), two-dimensional NMR (HSQC and TOCSY), pyrolysis GC–MS, gel permeation chromatography (GPC), nitrogen absorption, and optical microscopy (OM). Principal pyrolysis products generated from HQFCA units were 8-hydroxy-5,6-dimethylquinoline, 8-hydroxy-2-methylquinoline and 4-chloroacetophenone. This reactive terpolymer can be used as synthons for exchange membrane preparation and biomedical coating applications.     

DRYING OF PADDY IN A BED DRYER

The experimental results of a bed dryer (at Ludhiana) have been analyzed. The experimental results are well predicted by the small scale laboratory experiments on a spouted bed dryer.     

Effect of organic additives on the mitigation of volatility of 1-nitro-3,3'-dinitroazetidine (TNAZ): next generation powerful melt cast able high energy material

1-Nitro-3,3'-dinitroazetidine (TNAZ) was synthesized based on the lines of reported method. Thermolysis studies on synthesized and characterized TNAZ using differential scanning calorimetry (DSC) and hyphenated TG-FT-IR techniques were undertaken to generate data on decomposition pattern. FT-IR of decomposition products of TNAZ revealed the evolution of oxides of nitrogen and HCN containing species suggesting the cleavage of C/N-NO(2) bond accompanied with the collapse of ring structure. The effect of incorporation of 15% additives namely, 3-amino-1,2,4-triazole (AT), 3,5-diamino-1,2,4-triazole (DAT), carbohydrazide (CHZ), 5,7-dinitrobenzofuroxan (DNBF), bis (2,2-dinitropropyl) succinate (BNPS), triaminoguanidinium nitrate (TAGN), 2,4,6-trinitrobenzoic acid (TNBA) and nitroguanidine (NQ) on the volatility of TNAZ was investigated by undertaking thermogravimetric analysis. The TG pattern brings out the potential of BNPS and TAGN as additives to mitigate the volatility of TNAZ. The influence of additives on thermal decomposition of pattern of TNAZ was also investigated by DSC. The DSC results indicated that the additives did not have appreciable effect on the melting point of TNAZ. Scanning electron microscopic (SEM) studies were carried out to investigate the effect of additives on morphology of TNAZ. This paper also discusses the possible mechanism involved in between the TNAZ and TAGN and BNPS. It appears that the formation of charge transfer complex formation between the TNAZ and TAGN/BNPS. The effect of addition of high explosives such as CL-20, HMX and RDX on thermo-physical characteristics of TNAZ is also reported in this paper.